Namaste ! Vanakkam ! Namashkara ! Jai Jinendra ! India

Free Shipping on orders of Rs. 1,000 and above (normal delivery)
Official Store • Upto 2 Year Direct Warranty • GST invoice
1 4
Ugreen  |  SKU: 70683
52% off
New arrival

UGREEN 70683 NW136 8P/6P Crimper, Cutter & Stripper

Rs. 1,399.00 Rs. 2,887.00
MRP: Rs. 2,887.00 (inclusive of all taxes)
Tax included Shipping calculated at checkout.
Lower price than Amazon, free shipping above ₹1000, official India warranty, GST invoice, easy returns, COD available
Effortless Power
Precision Cuts
All-in-One
Comfort Grip
Durable Build
8P / 6P • CRIMP • CUT • STRIP

UGREEN 70683 NW136 8P/6P Crimper, Cutter & Stripper

Overview

UGREEN 70683 is a manual 8P/6P modular-plug tool that combines crimping, cable cutting and outer-jacket stripping. The NW136 accepts compatible 8P and 6P modular plugs, and its blade areas help square-cut cable and strip an outer jacket up to the listed diameter. Below: selection, installation, compatibility, real limitations and safe use without treating a passive accessory as active networking equipment.

SKU 70683ACTIVE product8P / 6P • CRIMP • CUT • STRIP
UGREEN 70683 product overview
UGREEN 70683 product overview
1

Key features

Role

The NW136 accepts compatible 8P and 6P modular plugs, and its blade areas help square-cut cable and strip an outer jacket up to the listed diameter.

Compatibility boundary

Compatible modular plugs and cable that physically match the 8P/6P dies and stripping area. RJ45, RJ11 and RJ12 are listed applications, but special shielded, pass-through or oversized plugs require their own compatibility check.

Performance reality

The mechanism assists repetitive hand work; it cannot detect miswiring or certify category performance. Test every finished cable separately.

Important exclusion

This is not a cable tester, continuity checker, punch-down tool, automatic wire-ordering tool or guaranteed crimper for every proprietary/pass-through plug.

2

Where it fits in the connection

1. Select cable
2. Prepare jacket
3. Load plug
4. Crimp
5. Test separately

The system rule: every stage must match. The lowest-rated, damaged or incorrectly terminated component can limit speed, reliability, shielding, PoE operation or serviceability.

3

Use scenarios

Scenario 1

Crimping compatible 8P Ethernet modular plugs.

Scenario 2

Crimping compatible 6P telephone-style modular plugs.

Scenario 3

Cutting and stripping cable during installation or repair.

Scenario 4

Repeated home, office or field terminations followed by cable testing.

4

Compatibility and selection guide

Use when

Compatible modular plugs and cable that physically match the 8P/6P dies and stripping area. RJ45, RJ11 and RJ12 are listed applications, but special shielded, pass-through or oversized plugs require their own compatibility check.

Do not assume

not a cable tester, continuity checker, punch-down tool, automatic wire-ordering tool or guaranteed crimper for every proprietary/pass-through plug.

Before bulk purchase: trial the cable, module, plug or rack fit and complete one tested installation. Small physical differences can matter even within the same category name.

UGREEN 70683 construction or installation detail
UGREEN 70683 construction or installation detail
5

Setup and usability guidance

  1. Step 1: Match the plug position count and physical form to the correct tool die.
  2. Step 2: Cut cable squarely with hands and loose clothing away from the blades.
  3. Step 3: Use the stripping area only on the outer jacket; rotate lightly and inspect before pulling the jacket away.
  4. Step 4: Prepare and insert conductors fully into the compatible modular plug.
  5. Step 5: Seat the plug completely, then close the handles in one smooth controlled cycle.
  6. Step 6: Inspect the crimp, test every conductor and store the tool closed, dry and away from children.

Work cleanly: dust, copper scraps and loose braid strands can create faults. Collect offcuts and inspect the finished area before energising connected equipment.

6

Compatible devices and systems

Network endpoints

Routers, switches, access points, computers, printers, smart televisions, cameras and other RJ45 network equipment only through a correctly built compatible link.

Structured cabling

Wall outlets, patch panels, permanent cable and patch leads must share a suitable category, shielding design and wiring scheme.

PoE equipment

Possible only within the boundary: The tool has no PoE role. Finished PoE cable suitability depends on matched conductors, connectors, heat limits and termination.

Operating systems

No operating-system driver is required for this passive accessory or manual tool; active adapters and switches are separate products.

7

What this product does

  • Provides its documented function: The NW136 accepts compatible 8P and 6P modular plugs, and its blade areas help square-cut cable and strip an outer jacket up to the listed diameter.
  • Supports the stated compatibility class: Compatible modular plugs and cable that physically match the 8P/6P dies and stripping area. RJ45, RJ11 and RJ12 are listed applications, but special shielded, pass-through or oversized plugs require their own compatibility check.
  • Can form part of a serviceable labelled network: when installed with matched components and tested.
  • Keeps infrastructure modular: damaged or changed portions can be traced and replaced without rebuilding unrelated equipment.
  • Uses no software: this product is passive or manual and has no configuration app.
8

What this product does not do

  • It is not a cable tester, continuity checker, punch-down tool, automatic wire-ordering tool or guaranteed crimper for every proprietary/pass-through plug.
  • It does not upgrade a lower-category cable or repair split pairs, poor conductor material, corrosion or bad device ports.
  • It does not guarantee PoE, bandwidth or error-free operation without a compliant complete link.
  • It does not remove the need for correct tools, installation practice, labelling and testing.
  • It should not be installed outdoors, in wet areas or beside mains wiring without a suitable compliant enclosure and qualified design.
9

What to do

Match

Match this SKU: use the title, construction and limits for 70683 rather than borrowing specifications from a similar family member.

Check

Check the complete path: confirm cable category, shielding, conductor construction, connector geometry, patch leads and endpoints.

Label

Label both ends: record room/port, wiring scheme and destination so later maintenance does not become guesswork.

Test

Test in stages: verify the cable or module before closing a wall plate or rack, then test again after final assembly.

Protect

Protect bend radius and strain relief: route cable gently and keep load away from contacts, IDC slots and device sockets.

10

What not to do

Do not force

Do not force parts: a keystone, plug, cable or tool that does not fit cleanly is probably the wrong geometry.

Do not miswire

Do not mix T568A and T568B accidentally: document the chosen scheme and check all eight conductors.

Do not over-untwist

Do not untwist pairs excessively: preserving pair geometry near termination matters to high-frequency performance.

Do not guess

Do not claim speed from appearance: clear housings, gold colour or a category marking do not replace complete-link testing.

Do not reuse damage

Do not use damaged parts: discard cracked housings, bent contacts, dull blades, loose shutters or failed crimp terminations.

11

Warnings and limitations

  • Sharp tools and contacts: keep fingers clear of blades, IDC contacts, trimmed conductors and crimp dies. Wear appropriate eye protection during cutting and termination.
  • Indoor low-voltage scope: no outdoor ingress rating is established. Keep the product dry, clean and away from corrosive environments or excessive heat.
  • Category is system-wide: a Cat5e, Cat6 or Cat7 label on one part does not upgrade the remaining cable, patch leads, terminations or equipment.
  • Test before service: visual inspection is not enough. Verify conductor map and real link negotiation; professional installations may require certification testing.
  • Do not work on live mains: networking hardware is low voltage, but wall boxes and racks may be close to hazardous electrical circuits.

model limit: The mechanism assists repetitive hand work; it cannot detect miswiring or certify category performance. Test every finished cable separately.

12

Technical specifications

Brand / SKU UGREEN 70683
Product role a manual 8P/6P modular-plug tool that combines crimping, cable cutting and outer-jacket stripping
Product type Multifunction modular-plug hand tool
Model NW136
Crimping interfaces 8P / 6P
Listed connector applications RJ45 / RJ11 / RJ12, subject to plug fit
Functions Crimp, cut and strip
Head material Q235 carbon structural steel
Blade material SK5, supported by model documentation
Listed stripping diameter Up to 10mm outer cable diameter
Dimensions 194.5 × 42.4 × 15.1mm
Listed net weight 282g
Extra blades 2 sets listed as included
Source https://www.ugreenindia.com/products/ugreen-multifunctioning-crimping-tool-with-extra-2-sets-of-blades-70683
14

Troubleshooting checklist

No link

Confirm both active devices, patch leads and port selections. Then check conductor map, full insertion and the connector/cable fit.

Lower speed than expected

Verify negotiation settings and every component category. Excessive untwist, split pairs and unsuitable cable construction can pass continuity yet fail performance.

Intermittent link

Look for incomplete seating, weak strain relief, damaged latch, nicked conductor, IDC not fully closed or a crimp made with the wrong die.

PoE device restarts

Stop use and inspect conductor material, gauge, contact engagement, heat and the powered equipment budget. Do not continue with a hot or damaged termination.

Shield or noise concern

For shielded products, check end-to-end shield design and grounding practice. Mixing shielded and unshielded parts can defeat the intended system.

Port or label mismatch

Trace one cable at a time, compare labels at both ends and update records immediately after correction.

15

Package contents

In the box

1 × UGREEN 70683 / NW136 crimping tool plus 2 extra blade sets, as stated on the India listing. Cable, connectors and tester are not included.

Devices, cables, racks, wall boxes, modules, tools and testers are not included unless explicitly named above.

16

Product-specific FAQ

What exactly is UGREEN 70683?
A manual 8P/6P modular-plug tool that combines crimping, cable cutting and outer-jacket stripping.
What is included in the package?
1 × UGREEN 70683 / NW136 crimping tool plus 2 extra blade sets, as stated on the India listing. Cable, connectors and tester are not included.
Which cables, modules or devices are compatible?
Compatible modular plugs and cable that physically match the 8P/6P dies and stripping area. RJ45, RJ11 and RJ12 are listed applications, but special shielded, pass-through or oversized plugs require their own compatibility check.
Does it guarantee the advertised network speed?
The mechanism assists repetitive hand work; it cannot detect miswiring or certify category performance. Test every finished cable separately. Test the complete channel rather than judging one component in isolation.
Can it be used in a PoE network?
The tool has no PoE role. Finished PoE cable suitability depends on matched conductors, connectors, heat limits and termination.
Which tools are required?
This is the hand tool. A separate cable tester and the correct plug/cable components are required. Replace blades only when the tool is secured and hands are clear.
Does it split, switch, route or convert a network connection?
No. not a cable tester, continuity checker, punch-down tool, automatic wire-ordering tool or guaranteed crimper for every proprietary/pass-through plug. Any active switching, routing, conversion or power function requires separate purpose-built equipment.
How should a finished installation be tested?
Start with a wire-map or continuity test that checks all required conductors and shield where applicable. Then connect known-good equipment, confirm negotiated link speed and observe errors under normal traffic.
Is it suitable for outdoor or mains-power installation?
No outdoor or ingress-protection rating is verified. This is a low-voltage networking accessory; it is not a mains device. Follow separation, fire, grounding and building rules.
What should I do if the link is intermittent?
Remove power where applicable, inspect for partial insertion, wrong colour order, excessive untwist, nicked conductors, poor strain relief or an incompatible cable/connector fit. Reterminate only with matched parts, then test again.
How is this SKU different from similar UGREEN products?
India page establishes 8P/6P work, RJ45/RJ11/RJ12 wording and two extra blade sets. NW136 regional documentation resolves dimensions, 282g weight, Q235 head and SK5 blades. The page backend reportedly labels connector/cable type as HDMI; that metadata is rejected as an obvious category error.

model check before ordering

Match SKU 70683, product type, port or die count, cable category/construction and package contents. Similar UGREEN networking accessories can look nearly identical while using different shielding, conductor fit, rack format or termination method.

SKU 706838P / 6P • CRIMP • CUT • STRIP

GST Invoice available, just mail back with details to order confirmation mail.

Buy direct from official UGREEN India

GST Invoice, Warranty, authenticity, faster support

  • 5 stars: 0 (0%)
  • 4 stars: 1 (100%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
A
Anonymous

Satisfied this tools. But required to add through pass cutting blade.
Back to top