UGREEN LP924 MagSafe-Compatible Magnetic Dashboard Car Phone Mount ...
UGREEN LP924 • SKU 65186
A Foldable Magnetic Phone Mount That Keeps Your Air Vents Free
The UGREEN LP924 MagSafe-Compatible Dashboard Car Phone Mount combines a double-layer N56 magnetic array, adjustable folding arm and 360° rotating base for convenient phone positioning without occupying an air vent.
Attach it to a suitable flat dashboard surface, adjust the arm around your driving position and place a compatible phone against the magnetic face. When it is not required, the mount folds down to approximately 25 mm for a cleaner, lower-profile installation.
Designed for Flexible Dashboard Placement
N56 Magnetic Hold
A double-layer magnetic structure provides a strong connection with compatible MagSafe phones, cases and magnetic rings.
Adjustable Viewing Position
Rotate the base and adjust the folding arm to position the screen around the dashboard layout.
Air Vents Remain Available
Dashboard installation avoids attaching the phone directly to the vehicle’s air-vent blades.
Fold-Down Design
Collapse the arm when the holder is not required to reduce its height above the dashboard.
Double-Layer N56 Magnetic Array
The mounting face uses a double-layer N56 magnetic structure designed to align with the circular magnetic connection in a compatible iPhone, MagSafe case or supplied metal ring.
The product artwork specifies a magnetic holding capability of up to approximately 2 kg. This represents the magnetic connection under stated test conditions and should not be treated as a recommended phone weight.
Real-world holding performance depends on phone weight, case material, magnetic-ring alignment, dashboard movement, road conditions and correct installation.
Rotate, Tilt and Fold Around Your Dashboard
A 360° rotating base lets you change the mount’s direction after installation. The folding arm and adjustable magnetic head provide additional control over the phone’s height, reach and viewing angle.
Position the phone vertically for calls and standard navigation layouts or rotate it horizontally for a wider map view. Always finalise the position before driving.
Detachable Mounting Assembly
The phone-holder assembly can be released from the dashboard anchor without peeling away the installed adhesive pad. This allows the visible mount to be removed or stored while the low-profile anchor remains attached.
The detached holder can also be positioned as a compact phone stand on a suitable stable surface. Check its balance before use, particularly with a large or heavy phone.
“Detachable” does not mean that the adhesive pad can be repeatedly transferred between dashboards. Moving the adhesive anchor may require a new compatible replacement pad.
Dashboard Surface Compatibility Is Essential
The adhesive base requires a suitable flat, smooth, clean and rigid surface. Installation quality depends as much on the dashboard material as it does on the adhesive.
Generally suitable:
- Smooth, flat dashboard panels
- Clean, rigid and non-porous surfaces
- Flat glass where installation is permitted and does not obstruct the driver’s view
Not recommended:
- Leather or leather-covered dashboards
- Suede, fabric or Alcantara-style surfaces
- Oiled, waxed or treated dashboard surfaces
- Heavily grained or textured plastic
- Curved, uneven or flexible panels
- Peeling, cracked, recently coated or delicate soft-touch surfaces
Adhesive installation may leave residue or mark a sensitive surface. Check the vehicle manufacturer’s surface-care instructions before installation.
Compact When Folded
The base measures approximately 80.8 × 42.9 mm. When folded, the mount is approximately 24.9 mm high.
In the illustrated upright configuration, the arm section is approximately 89.9 mm high and the magnetic mounting face measures approximately 55.9 mm across.
MagSafe-Compatible and Adaptable for Other Phones
Direct magnetic compatibility
- iPhone 17 series
- iPhone 16 series
- iPhone 15 series
- iPhone 14 series
- iPhone 13 series
- iPhone 12 series
- Compatible MagSafe cases with an integrated magnetic ring
Compatibility using an included metal ring
- Compatible Samsung Galaxy S, Galaxy A, Galaxy Note and selected foldable phones
- Compatible Google Pixel phones
- OnePlus, Xiaomi, Redmi, Motorola, OPPO, vivo, realme and other smartphones
- Non-MagSafe iPhones and suitable non-magnetic cases
A normal case without an integrated magnetic ring can weaken the connection. Use a MagSafe-compatible case or attach one of the supplied rings to a suitable flat case.
Product Specifications
| Brand | UGREEN |
|---|---|
| Model | LP924 |
| SKU / MPN | 65186 |
| GTIN / barcode | 6941876261864 |
| Product type | MagSafe-compatible magnetic dashboard car phone holder |
| Colour | Black/Grey |
| Construction | Aluminium-alloy and engineered-polymer structure |
| Magnet type | Double-layer N56 magnetic array |
| Stated magnetic hold | Up to approximately 2 kg under stated test conditions |
| Mounting method | Dashboard adhesive base |
| Adjustment | 360° rotating base with adjustable folding arm and magnetic head |
| Viewing orientation | Portrait, landscape or intermediate angle |
| Listed folded dimensions | Approximately 8 × 4.2 × 2.5 cm |
| Listed product weight | Approximately 147 g |
| Charging function | None – magnetic phone holder only |
| Power, cable or pairing required | No |
| Warranty | 2 years, subject to the applicable UGREEN India warranty policy |
How to Install the Dashboard Base
- Park the vehicle safely and switch off the engine before beginning.
- Choose a flat location that will not obstruct the road, mirrors, instruments, controls, display, vents or airbags.
- Check that the selected surface is compatible with adhesive mounting.
- Clean the surface with a suitable lint-free cloth and allow it to dry completely.
- Avoid applying dashboard polish, wax, oil or dressing before installation.
- Remove the adhesive liner without touching the adhesive surface.
- Place the base once, press it firmly and evenly for at least 10 seconds.
- Wait at least 5 hours before attaching the phone or applying load to the mount.
- After curing, attach the holder, adjust its position and perform a gentle stability test.
Using the Included Metal Rings
- Do not add a ring to a MagSafe-compatible iPhone or case unless additional adaptation is specifically required.
- For another phone, choose a clean, dry and flat phone-case surface.
- Centre the ring around the wireless-charging coil position where applicable.
- Remove the adhesive liner, position the ring carefully and press it evenly.
- Allow the adhesive to settle according to the supplied instructions before mounting the phone.
Ring adhesion can be unreliable on textured, fabric, silicone, oily or heavily curved cases. Ring placement and case thickness can also affect wireless-charging alignment.
Important Usage Information
- This product does not charge the phone.
- Adhesive installation is not suitable for every dashboard material.
- The adhesive base may leave residue or damage delicate surface finishes.
- The removable holder does not make the adhesive anchor repeatedly transferable.
- Do not adjust, install or remove the phone while driving.
- Do not install the mount in an airbag deployment area.
- Cases containing cards, wallets or thick accessories can weaken magnetic attachment.
- Magnetic strength does not compensate for an incorrectly installed adhesive base.
- Follow applicable road-safety rules and keep the screen outside the driver’s critical field of view.
What’s in the Box?
- 1 × UGREEN LP924 Foldable Magnetic Phone Mount
- 1 × Dashboard adhesive mounting base/pad
- 2 × Adhesive metal rings
- 1 × User documentation
Phone, phone case, vehicle and other accessories shown in the images are for demonstration only.
Frequently Asked Questions
Does this holder wirelessly charge my phone?
No. It is a magnetic phone holder and contains no charging coil, USB port, cable or power electronics.
Which iPhones attach directly?
MagSafe-enabled iPhone 12 and later models attach directly when used without a case or with a properly designed MagSafe-compatible case.
Can it hold an Android phone?
Yes, when one of the supplied metal rings is correctly attached to a suitable flat case or compatible phone surface.
Can it be attached to a leather dashboard?
No. Leather, suede, fabric, oiled and soft-touch surfaces may provide poor adhesion or become damaged during installation or removal.
Can it be installed on a curved dashboard?
It is intended for a flat mounting area. Curved or uneven surfaces reduce contact with the adhesive pad and can weaken installation.
How long should I wait after attaching the base?
Wait at least five hours before attaching the phone or applying load. Avoid disturbing the base while the adhesive is settling.
Can I move it between different vehicles?
The holder can detach from the installed anchor, but the adhesive anchor is not intended for frequent transfer. Moving it may require a new compatible adhesive pad.
Can it be used as a desktop phone stand?
The detached folding assembly can be positioned on a suitable stable surface as shown in the product images. Check balance before use, particularly with a heavy phone.
Can I switch between portrait and landscape?
Yes. The magnetic face and adjustable structure allow portrait, landscape and intermediate viewing positions.
Genuine UGREEN Product for India
Genuine UGREEN product • GST invoice available • 2-year product warranty • India-based customer and warranty support
-
Dimentions
-
Warranty
-
Weight
GST Invoice available, just mail back with details to order confirmation mail.
Buy direct from official UGREEN India
GST Invoice, Warranty, authenticity, faster support
