I had been using another coupler and I was getting less than 100 Mbps speed. Hence I decided to try Ugreen coupler. I had bought a 1000Mbps and this one. Both saved me from the hassle of changing the entire cable.
The charger works perfectly for my MacBook pro, samsung phone, iphone and samsung watch. All devices charged flawlessly. The charger is heavy and may fall when i place it in a socket on table. It heats up a bit but not too much.
Does the job perfectly.
The UGREEN Adjustable Vertical Laptop Stand (20471) stands a closed laptop or tablet upright to free up desk space. Turn the knob to set the slot anywhere from about 12mm to 26mm so it fits your device snugly, case and all. Silicone lining protects the finish and the aluminium body sits on a wide 150 × 78mm base.
12–26mmadjustable slot
Aluminiumbody
150 × 78mmbase
Siliconelining
UGREEN Vertical Laptop Stand key features
Adjustable slot About 12–26mm via the bottom knob.
Fits thick and thin Laptops, tablets and more, with or without a case.
Silicone lining Reduces scratches and movement.
Saves desk space Ideal for closed-lid monitor setups.
Airflow Upright position lets the laptop breathe.
UGREEN Vertical Laptop Stand highlights
Fits thick and thin devices
Set the slot to match your device exactly.
Silicone protection
Soft lining protects your laptop finish.
Better cooling
Standing upright helps heat escape.
Usage scenarios for the UGREEN Vertical Laptop Stand
Closed-lid desk setup
Run your laptop with an external monitor and save space.
Feature
Detail
Slot
12–26mm
Base
150 × 78mm
Use: Measure the device with its case; set the knob.
Tablets and more
Store a tablet upright beside the laptop.
Feature
Detail
Lining
Silicone
Material
Aluminium
Use: Adjust the slot to the thinner device.
UGREEN Vertical Laptop Stand compatibility
Device
Status
What to expect
MacBook Air and MacBook Pro
Compatible
undefined
Windows laptops (HP, Dell, Lenovo, ASUS, Acer)
Compatible
undefined
Chromebooks
Compatible
undefined
Tablets
Compatible
Within the 12–26mm slot
Very heavy or tall laptops
Partly
Check balance before letting go
Works with
Laptops and tablets 12–26mm thick
Won't work with
Devices thicker than 26mm
UGREEN 20471 Adjustable Vertical Laptop Stand specifications
Model
UGREEN 20471
Slot width
About 12–26mm, knob adjusted
Base
150 × 78mm
Material
Aluminium, silicone lining
Colour
Grey/silver
What's in the box
UGREEN Adjustable Vertical Laptop Stand (20471)
Good to know
Measure with the case on. Cases and shells count toward the slot width.
UGREEN Vertical Laptop Stand FAQs
How wide does the slot open?
About 12–26mm.
Will my laptop fit in its case?
Yes if the total thickness is within 12–26mm.
Does it scratch the laptop?
Silicone lining protects it.
Can I use it with a closed laptop and monitor?
Yes, that is its main use.
Genuine UGREEN, imported and sold by Sophus Technosol Pvt Ltd, the authorised national distributor. GST invoice with every order. 2-year India warranty.
The UGREEN Adjustable Vertical Laptop Stand (20471) stands a closed laptop or tablet upright to free up desk space. Turn the knob to set the slot anywhere from about 12mm to 26mm so it fits your device snugly, case and all. Silicone lining protects the finish and the aluminium body sits on a wide 150 × 78mm base.
12–26mmadjustable slot
Aluminiumbody
150 × 78mmbase
Siliconelining
UGREEN Vertical Laptop Stand key features
Adjustable slot About 12–26mm via the bottom knob.
Fits thick and thin Laptops, tablets and more, with or without a case.
Silicone lining Reduces scratches and movement.
Saves desk space Ideal for closed-lid monitor setups.
Airflow Upright position lets the laptop breathe.
UGREEN Vertical Laptop Stand highlights
Fits thick and thin devices
Set the slot to match your device exactly.
Silicone protection
Soft lining protects your laptop finish.
Better cooling
Standing upright helps heat escape.
Usage scenarios for the UGREEN Vertical Laptop Stand
Closed-lid desk setup
Run your laptop with an external monitor and save space.
Feature
Detail
Slot
12–26mm
Base
150 × 78mm
Use: Measure the device with its case; set the knob.
Tablets and more
Store a tablet upright beside the laptop.
Feature
Detail
Lining
Silicone
Material
Aluminium
Use: Adjust the slot to the thinner device.
UGREEN Vertical Laptop Stand compatibility
Device
Status
What to expect
MacBook Air and MacBook Pro
Compatible
undefined
Windows laptops (HP, Dell, Lenovo, ASUS, Acer)
Compatible
undefined
Chromebooks
Compatible
undefined
Tablets
Compatible
Within the 12–26mm slot
Very heavy or tall laptops
Partly
Check balance before letting go
Works with
Laptops and tablets 12–26mm thick
Won't work with
Devices thicker than 26mm
UGREEN 20471 Adjustable Vertical Laptop Stand specifications
Model
UGREEN 20471
Slot width
About 12–26mm, knob adjusted
Base
150 × 78mm
Material
Aluminium, silicone lining
Colour
Grey/silver
What's in the box
UGREEN Adjustable Vertical Laptop Stand (20471)
Good to know
Measure with the case on. Cases and shells count toward the slot width.
UGREEN Vertical Laptop Stand FAQs
How wide does the slot open?
About 12–26mm.
Will my laptop fit in its case?
Yes if the total thickness is within 12–26mm.
Does it scratch the laptop?
Silicone lining protects it.
Can I use it with a closed laptop and monitor?
Yes, that is its main use.
Genuine UGREEN, imported and sold by Sophus Technosol Pvt Ltd, the authorised national distributor. GST invoice with every order. 2-year India warranty.
UGREEN 20471 is a passive vertical holder for a closed notebook, tablet or similarly shaped device. It places the device on its edge so an external-monitor desk can reclaim the footprint normally occupied by an open laptop.
≈ 12–26mmSlot range
150 × 78mmBase footprint
176gWeight
Aluminium alloyPrimary material
Features
What it does well.
Key features
At a glance
Fit is determined by thickness and balance.
Adjustable channel. Set the slot to approximately 12–26mm. Cases and shells count toward total thickness.
Silicone lining. Pads contact the device and desk to reduce scratching and movement when clean and correctly adjusted.
Aluminium body. Provides the rigid stand structure in a compact grey/silver desktop form.
Wide base. The 150 × 78mm footprint supports balance, but a very heavy, tall or off-centre device still needs a stability check.
Tune the slot to the actual device, with or without its case
12–26mm adjustment
The bottom knob moves the slot walls across an approximately 12–26mm range. Measure the device at the point that will sit in the stand, including any fitted case, shell or rubber feet.
Measure before ordering.
Do not exceed the verified slot range.
Silicone at the contact points helps protect finishes
Surface protection
Silicone lining separates the aluminium from the laptop or tablet, while pads under the base help the stand remain in place on a clean desk.
Keep pads clean and dry.
Lower the device rather than sliding it sideways.
Store the computer upright beside an external-display workspace
Space-saving layout
Vertical storage reduces the horizontal footprint of a closed laptop, which is useful beside a monitor, keyboard and dock. It can also organise a tablet or 2-in-1 when not being handheld.
Configure closed-lid mode before relying on it.
Keep attached cables free from side-load.
Open vertical placement can expose more surface area without active cooling
Passive ventilation
Holding a closed device upright can keep broad surfaces away from a desk and may aid passive airflow around exposed vents. The actual thermal result depends on the computer's vent placement and workload.
Orient vents toward open air.
Monitor temperature during initial closed-lid use.
Use scenarios
Real-world applications
Organise closed devices without adding electronics.
External-monitor desk. Store a closed laptop vertically beside its monitor, keyboard and separate dock to reclaim desk area.
Tablet storage. Hold a tablet upright when not in use, provided its thickness and balance fit the adjusted slot.
Shared work surface. Move a notebook out of the writing area while keeping it accessible for the next session.
Device rotation. Re-adjust the stand when alternating between work and personal devices instead of forcing both into one setting.
Compatible devices and systems
Device and system fit
Measure thickness rather than relying on screen diagonal.
MacBook and Windows laptops. Suitable when the closed device, with any case, fits roughly 12–26mm and rests stably.
Chromebooks and 2-in-1s. Compatible by thickness and balance; hinges and protruding feet must not be clamped.
Tablets. Can be stored vertically when the edge is thick enough for a stable, gently adjusted fit.
Cases and shells. Include the fitted case in the measurement. Soft sleeves should normally be removed before clamping because they can compress unevenly.
Setup and usability guidance
Connection workflow
Measure, adjust, place and stability-check.
Measure the closed device thickness at the intended contact point.
Confirm the measurement lies within approximately 12–26mm.
Place the stand on a flat, clean, dry and stable desk.
Turn the underside knob to open the slot slightly wider than the device.
Lower the device straight into the silicone-lined channel.
Adjust until supported without clamping pressure, then gently check front-to-back and side-to-side stability.
A stand improves organisation, not device capability
Realistic performance
Stability depends on fit, centre of gravity, base placement and cable pull. Screen diagonal is not a reliable substitute for those checks.
Good fit. Device enters without force, rests on silicone and shows minimal wobble.
Case fitted. Re-measure and re-adjust; cases can add several millimetres and change balance.
Closed-lid use. Requires the computer's own settings, power and external display/peripherals.
Cooling. Passive placement only; no fan or active thermal performance is provided.
Function scope and boundaries
Function scope and boundaries
Hold one compatible laptop or tablet vertically.
Adjust across an approximately 12–26mm slot range.
Use silicone contact surfaces to reduce scratching and movement.
Reduce the device footprint on a desk.
It does not add USB ports, charging, data or video.
It is not a security lock or anti-theft dock.
It does not actively cool a device.
It does not guarantee fit by screen size alone.
Check before buying
Important limitations
Confirm these points before buying or connecting model 20471:
Measure total closed thickness including any case.
Confirm the device rests securely within the 12–26mm range.
Check that vents, buttons and protruding hinges will not be blocked.
Use a flat desk with space around the base.
Consider cable pull and the device's centre of gravity.
Good practice
Good practice
Clean silicone and device surfaces before use.
Open the slot before inserting a device.
Lower the device vertically and adjust gently.
Check stability after every adjustment.
Do not force an over-thick device into the channel.
Do not over-tighten against a thin chassis or screen.
Do not place on an uneven or moving surface.
Do not carry the stand with the device inserted.
Warnings and limitations
Safe operation
Warning 1. A poorly balanced or incorrectly adjusted device can tip and be damaged. Perform a gentle stability check before leaving it unattended.
Warning 2. Keep cables from pulling sideways; a snagged charging or display cable can overturn the stand.
Warning 3. Do not clamp against fragile screen glass, a hinge, port, button or vent.
Specifications
At a glance.
Brand
UGREEN
Model / SKU
20471
Product type
Adjustable vertical laptop/tablet stand
Slot range
Approximately 12–26mm
Base footprint
150 × 78mm
Overall dimensions
Approximately 50 × 150 × 80mm
Weight
176g
Primary material
Aluminium alloy
Contact protection
Silicone lining and base pads
Adjustment
Tool-free underside knob
Colour
Grey / silver grey
Electronics
None
In the box
UGREEN adjustable vertical laptop stand, model 20471 × 1
Verified technical details
In the box
Laptop, tablet, dock, charger, cables and tools are not included.
FAQs
Questions buyers ask.
What laptop size fits?
Use thickness rather than screen diagonal. The verified adjustable slot is approximately 12–26mm, and the device must also balance securely.
Will it fit a 17.3-inch laptop?
Official regional size marketing conflicts. Measure the exact closed thickness and assess weight and balance instead of relying on the 17.3-inch label.
Can I leave a case on?
Yes only if the combined device-and-case thickness fits 12–26mm and the case does not compress or destabilise the device.
How is the width adjusted?
Turn the knob on the underside, place the device in the silicone-lined channel and adjust gently until supported without clamping.
Does it scratch a laptop?
Silicone separates the device from aluminium, but pads and the device must be kept free from grit or debris.
Is it a USB dock?
No. It is a passive holder with no ports, electronics, charging or data.
Does it cool the laptop?
It may expose more surface area, but it has no fan and provides no guaranteed cooling performance.
Can I use the laptop closed?
Yes if the computer supports closed-lid operation with the required external power, display and peripherals.
Can it hold an open laptop?
No. It is designed for vertical storage of a closed device.
Is it secure against theft?
No. It has no lock or anchoring mechanism.
What is included?
One UGREEN 20471 adjustable aluminium vertical stand.