UGREEN 90416 USB Desktop Omnidirectional Microphone

Overview

UGREEN 90416 is a USB-A bus-powered desktop condenser microphone with an adjustable gooseneck, omnidirectional pickup, hardware mute/level control and a 3.5mm expansion audio output. This guide uses the exact active Shopify record, every meaningful product-owned gallery image and exact UGREEN evidence to keep direction, connector, sample-rate, microphone, power and compatibility claims revision-specific.

Exact product role

a USB-A bus-powered desktop condenser microphone with an adjustable gooseneck, omnidirectional pickup, hardware mute/level control and a 3.5mm expansion audio output.

Signal path

Voice is captured at the microphone and sent digitally through USB-A to the computer. The 3.5mm socket is an audio expansion/output connection for headphones or powered audio equipment; it is not an analogue microphone input.

Conversion boundary

Exact data specifies 16-bit/48kHz capture, 100Hz–15kHz frequency response and SNR above 60dB. The omnidirectional pattern intentionally hears sound around the microphone, so room acoustics and placement matter.

Power design

Powered by the connected USB-A host; no battery or charging cycle. Use a stable USB port and avoid unpowered hubs if recognition or level is inconsistent.

Voice is captured at the microphone and sent digitally through USB-A to the computer. The 3.5mm socket is an audio expansion/output connection for headphones or powered audio equipment; it is not an analogue microphone input.

Connector rule: an output must feed the matching input. Physical fit does not prove electrical role, microphone wiring, charging protocol or signal level.

Safe start: lower volume or gain, check labels and connect one complete path before adding any charger, second endpoint or application.

Source recording, operating-system mode, app processing, cable path, gain staging and destination equipment all affect the heard or recorded result. A format ceiling is not a promise of better sound from every source.

1. Step 1: Place the stable base on a flat surface away from keyboard vibration and loud speakers.
2. Step 2: Connect USB-A directly to a supported computer.
3. Step 3: Select the UGREEN USB microphone as the recording input.
4. Step 4: Aim the gooseneck close enough for clear speech and set a moderate input/volume level.
5. Step 5: Check the LED mute state, record a short sample and reduce room noise or speaker leakage before the session.

Usability tip: test playback and microphone or charging separately before relying on simultaneous operation.

Listed for Windows 7/8.1/10/11, macOS and Linux computers with USB-A audio support. USB-C-only hosts require a suitable data-capable adapter. Phone/tablet use is not promised by the exact compatibility table.

• Match the exact connector role and wiring standard.
• Check host operating-system audio settings and app permissions.
• For USB audio, confirm the port supports data/audio rather than charging only.
• For analogue audio, confirm input versus output and headset TRRS versus stereo TRS.
• For XLR, confirm signal level, balanced wiring and phantom-power requirements.

Confirm exact SKU

Check 90416 on the product or package before relying on these specifications.

Start at low level

Lower headphone volume, speaker level, microphone gain or channel fader before connection.

Test one path

Verify one source, adapter/cable and destination before adding more equipment.

Keep ports clean and dry

Disconnect power, remove lint without metal tools and allow complete drying before reuse.

Use system settings

Select the intended playback and recording devices; physical connection alone may not change routing.

Store without stress

Coil cables loosely and protect exposed plugs, pins and adapter housings.

Do not force a fit

Stop if alignment, case clearance, pins or latch do not match.

Do not guess direction

Inputs and outputs can share the same connector shape.

Do not overstate formats

Use only the exact sample-rate or signal claim listed for this SKU.

Do not use at unsafe volume

High playback levels can injure hearing and overload equipment.

Do not patch live phantom power

For XLR, mute and disable phantom power before changing connections.

Do not create hazards

Keep leads away from pedals, controls, doors, wheels, children and walkways.

Power behaviour: Powered by the connected USB-A host; no battery or charging cycle. Use a stable USB port and avoid unpowered hubs if recognition or level is inconsistent.

• Use only compliant, undamaged hosts, chargers and cables.
• Disconnect for unusual heat, smell, intermittent power, corrosion or visible damage.
• Do not cover adapters during charging or operation.
• Keep all contacts dry and free of conductive debris.
• No product in this batch should be treated as weather-resistant unless an exact IP rating is published.

No playback

Check source output selection, destination input, mute state, volume and full connector seating.

No microphone

Confirm an exact mic-return path, correct TRRS/XLR wiring, recording-device selection and app permission.

Charging absent or slow

Confirm that this SKU supports charging, then test a compatible charger/cable and inspect host limits.

Noise or hum

Separate signal leads from power bricks, test another port/path and verify balanced grounding or AUX input role.

One channel missing

Reinsert the plug fully, inspect contacts and test each device with a known-good cable or headset.

USB device not recognised

Try a direct data-capable USB port, reboot audio services and check exact operating-system support.