Namaste ! Vanakkam ! Namashkara ! Jai Jinendra ! India

Free Shipping for Normal Deliveries on orders above Rs. 999
Official Store • 2 Year Direct Warranty • GST invoice
1 7
Ugreen  |  SKU: 50246
37% off
New arrival

UGREEN 50246 Cat5/5e Unshielded RJ45 Plugs, 100-Pack

Rs. 695.00 Rs. 1,109.00
Tax included Shipping calculated at checkout.

Secure Link
Fast Transfer
Durable Build
Easy Setup
Universal Fit
CAT5 / CAT5E • UNSHIELDED • 100 PACK

UGREEN 50246 Cat5/5e Unshielded RJ45 Plugs, 100-Pack

Overview

UGREEN 50246 is a bulk pack of 100 clear unshielded 8P8C modular plugs for terminating compatible Cat5 or Cat5e Ethernet cable. Each plug becomes a male modular cable end after correct conductor arrangement and crimping. It is a cable component, not an adapter or active network device. This guide explains selection, installation, compatibility, real limitations and safe use without treating a passive accessory as active networking equipment.

Exact SKU 50246ACTIVE productCAT5 / CAT5E • UNSHIELDED • 100 PACK
UGREEN 50246 exact product overview
UGREEN 50246 exact product overview
1

Key features

Exact role

Each plug becomes a male modular cable end after correct conductor arrangement and crimping. It is a cable component, not an adapter or active network device.

Compatibility boundary

Compatible Cat5 and Cat5e UTP cable only after checking conductor diameter, solid/stranded construction and jacket geometry against the plug. Similar-looking modular plugs are not universally interchangeable.

Performance reality

The finished lead is limited by cable category and construction, conductor order, untwist length, crimp quality and connected network equipment.

Important exclusion

This is not a Cat6/Cat6A/Cat7/Cat8 guarantee, not shielded, not a pass-through plug, not a female coupler, not reusable after a failed crimp, and not a cable tester.

2

Where it fits in the connection

1. Network device
2. Crimped plug
3. Matched cable
4. Crimped plug
5. Network device

The system rule: every stage must match. The lowest-rated, damaged or incorrectly terminated component can limit speed, reliability, shielding, PoE operation or serviceability.

3

Use scenarios

Scenario 1

Custom Cat5e patch leads for ordinary compatible network equipment.

Scenario 2

Replacing a damaged plug on a cable whose conductor geometry fits.

Scenario 3

Bulk labelling and termination projects with repeatable test records.

Scenario 4

Keeping spare non-shielded plugs for controlled maintenance work.

4

Compatibility and selection guide

Use when

Compatible Cat5 and Cat5e UTP cable only after checking conductor diameter, solid/stranded construction and jacket geometry against the plug. Similar-looking modular plugs are not universally interchangeable.

Do not assume

not a Cat6/Cat6A/Cat7/Cat8 guarantee, not shielded, not a pass-through plug, not a female coupler, not reusable after a failed crimp, and not a cable tester.

Before bulk purchase: trial the exact cable, module, plug or rack fit and complete one tested installation. Small physical differences can matter even within the same category name.

UGREEN 50246 construction or installation detail
UGREEN 50246 construction or installation detail
5

Setup and usability guidance

  1. Step 1: Identify the cable category and verify it is unshielded Cat5/Cat5e with compatible conductors.
  2. Step 2: Choose T568A or T568B and maintain the required scheme across the intended link.
  3. Step 3: Strip the jacket carefully without nicking insulation; retain pair twists close to the plug.
  4. Step 4: Order and flatten all eight conductors, trim evenly and insert fully into the clear housing.
  5. Step 5: Confirm colour order and conductor reach visually before crimping.
  6. Step 6: Crimp once with the correct 8P die, inspect strain capture and contacts, then test the finished cable.

Work cleanly: dust, copper scraps and loose braid strands can create faults. Collect offcuts and inspect the finished area before energising connected equipment.

6

Compatible devices and systems

Network endpoints

Routers, switches, access points, computers, printers, smart televisions, cameras and other RJ45 network equipment only through a correctly built compatible link.

Structured cabling

Wall outlets, patch panels, permanent cable and patch leads must share a suitable category, shielding design and wiring scheme.

PoE equipment

Possible only within the verified boundary: The exact listing does not provide a PoE class or current rating. Do not assume PoE suitability without a complete standards-compliant cable, connector and installation assessment.

Operating systems

No operating-system driver is required for this passive accessory or manual tool; active adapters and switches are separate products.

7

What this product does

  • Provides its exact documented function: Each plug becomes a male modular cable end after correct conductor arrangement and crimping. It is a cable component, not an adapter or active network device.
  • Supports the stated compatibility class: Compatible Cat5 and Cat5e UTP cable only after checking conductor diameter, solid/stranded construction and jacket geometry against the plug. Similar-looking modular plugs are not universally interchangeable.
  • Can form part of a serviceable labelled network: when installed with matched components and tested.
  • Keeps infrastructure modular: damaged or changed portions can be traced and replaced without rebuilding unrelated equipment.
  • Uses no software: this product is passive or manual and has no configuration app.
8

What this product does not do

  • It is not a Cat6/Cat6A/Cat7/Cat8 guarantee, not shielded, not a pass-through plug, not a female coupler, not reusable after a failed crimp, and not a cable tester.
  • It does not upgrade a lower-category cable or repair split pairs, poor conductor material, corrosion or bad device ports.
  • It does not guarantee PoE, bandwidth or error-free operation without a compliant complete link.
  • It does not remove the need for correct tools, installation practice, labelling and testing.
  • It should not be installed outdoors, in wet areas or beside mains wiring without a suitable compliant enclosure and qualified design.
9

What to do

Match

Match the exact SKU: use the title, construction and limits for 50246 rather than borrowing specifications from a similar family member.

Check

Check the complete path: confirm cable category, shielding, conductor construction, connector geometry, patch leads and endpoints.

Label

Label both ends: record room/port, wiring scheme and destination so later maintenance does not become guesswork.

Test

Test in stages: verify the cable or module before closing a wall plate or rack, then test again after final assembly.

Protect

Protect bend radius and strain relief: route cable gently and keep load away from contacts, IDC slots and device sockets.

10

What not to do

Do not force

Do not force parts: a keystone, plug, cable or tool that does not fit cleanly is probably the wrong geometry.

Do not miswire

Do not mix T568A and T568B accidentally: document the chosen scheme and check all eight conductors.

Do not over-untwist

Do not untwist pairs excessively: preserving pair geometry near termination matters to high-frequency performance.

Do not guess

Do not claim speed from appearance: clear housings, gold colour or a category marking do not replace complete-link testing.

Do not reuse damage

Do not use damaged parts: discard cracked housings, bent contacts, dull blades, loose shutters or failed crimp terminations.

11

Warnings and limitations

  • Sharp tools and contacts: keep fingers clear of blades, IDC contacts, trimmed conductors and crimp dies. Wear appropriate eye protection during cutting and termination.
  • Indoor low-voltage scope: no outdoor ingress rating is established. Keep the product dry, clean and away from corrosive environments or excessive heat.
  • Category is system-wide: a Cat5e, Cat6 or Cat7 label on one part does not upgrade the remaining cable, patch leads, terminations or equipment.
  • Test before service: visual inspection is not enough. Verify conductor map and real link negotiation; professional installations may require certification testing.
  • Do not work on live mains: networking hardware is low voltage, but wall boxes and racks may be close to hazardous electrical circuits.

Exact model limit: The finished lead is limited by cable category and construction, conductor order, untwist length, crimp quality and connected network equipment.

12

Technical specifications

Brand / SKU UGREEN 50246
Product role a bulk pack of 100 clear unshielded 8P8C modular plugs for terminating compatible Cat5 or Cat5e Ethernet cable
Product type Unshielded modular plugs for cable termination
Cable categories Cat5 / Cat5e
Connector 8P8C male modular plug
Pack quantity 100
Housing Clear plastic
Contacts Gold-plated
Shielding None
Wiring T568A or T568B according to installation design
Termination Crimp; compatible tool required
Electronics None; passive
Verified source https://www.ugreenindia.com/products/ugreen-rj45-network-connector-for-utp-cat-5-cat-5e-100pcs-box-50246
13

Product research and claim reconciliation

Primary source: exact UGREEN India SKU page and the current live Shopify product record.

Visual check: Exact UGREEN India text and the first four live images agree on clear unshielded Cat5/5e 8P8C plugs and T568A/B use. Two later gallery slides are visibly branded CableCreation, not UGREEN; they were excluded along with their maximum-wire and three-point-contact claims. The listing’s “RJ45 switch” translation was corrected to modular plug.

Claim policy: conflicting family artwork, mistranslated metadata, impossible dimensions and adjacent-model specifications are excluded rather than averaged together.

UGREEN 50246 exact detail retained after conflict review
UGREEN 50246 exact detail retained after conflict review
14

Troubleshooting checklist

No link

Confirm both active devices, patch leads and port selections. Then check conductor map, full insertion and the exact connector/cable fit.

Lower speed than expected

Verify negotiation settings and every component category. Excessive untwist, split pairs and unsuitable cable construction can pass continuity yet fail performance.

Intermittent link

Look for incomplete seating, weak strain relief, damaged latch, nicked conductor, IDC not fully closed or a crimp made with the wrong die.

PoE device restarts

Stop use and inspect conductor material, gauge, contact engagement, heat and the powered equipment budget. Do not continue with a hot or damaged termination.

Shield or noise concern

For shielded products, check end-to-end shield design and grounding practice. Mixing shielded and unshielded parts can defeat the intended system.

Port or label mismatch

Trace one cable at a time, compare labels at both ends and update records immediately after correction.

15

Package contents

In the box

100 × UGREEN 50246 Cat5/Cat5e unshielded 8P8C modular plugs. Cable, boots, crimper and tester are not identified as included.

Devices, cables, racks, wall boxes, modules, tools and testers are not included unless explicitly named above.

16

Product-specific FAQ

What exactly is UGREEN 50246?
A bulk pack of 100 clear unshielded 8P8C modular plugs for terminating compatible Cat5 or Cat5e Ethernet cable.
What is included in the package?
100 × UGREEN 50246 Cat5/Cat5e unshielded 8P8C modular plugs. Cable, boots, crimper and tester are not identified as included.
Which cables, modules or devices are compatible?
Compatible Cat5 and Cat5e UTP cable only after checking conductor diameter, solid/stranded construction and jacket geometry against the plug. Similar-looking modular plugs are not universally interchangeable.
Does it guarantee the advertised network speed?
The finished lead is limited by cable category and construction, conductor order, untwist length, crimp quality and connected network equipment. Test the complete channel rather than judging one component in isolation.
Can it be used in a PoE network?
The exact listing does not provide a PoE class or current rating. Do not assume PoE suitability without a complete standards-compliant cable, connector and installation assessment.
Which tools are required?
Use a compatible 8P modular-plug crimping tool plus cable cutter/stripper and tester. Always trial one plug with the actual cable before terminating a large batch.
Does it split, switch, route or convert a network connection?
No. not a Cat6/Cat6A/Cat7/Cat8 guarantee, not shielded, not a pass-through plug, not a female coupler, not reusable after a failed crimp, and not a cable tester. Any active switching, routing, conversion or power function requires separate purpose-built equipment.
How should a finished installation be tested?
Start with a wire-map or continuity test that checks all required conductors and shield where applicable. Then connect known-good equipment, confirm negotiated link speed and observe errors under normal traffic.
Is it suitable for outdoor or mains-power installation?
No outdoor or ingress-protection rating is verified. This is a low-voltage networking accessory; it is not a mains device. Follow separation, fire, grounding and building rules.
What should I do if the link is intermittent?
Remove power where applicable, inspect for partial insertion, wrong colour order, excessive untwist, nicked conductors, poor strain relief or an incompatible cable/connector fit. Reterminate only with matched parts, then test again.
How is this exact SKU different from similar UGREEN products?
Exact UGREEN India text and the first four live images agree on clear unshielded Cat5/5e 8P8C plugs and T568A/B use. Two later gallery slides are visibly branded CableCreation, not UGREEN; they were excluded along with their maximum-wire and three-point-contact claims. The listing’s “RJ45 switch” translation was corrected to modular plug.

Exact-model check before ordering

Match SKU 50246, product type, port or die count, cable category/construction and package contents. Similar UGREEN networking accessories can look nearly identical while using different shielding, conductor fit, rack format or termination method.

SKU 50246CAT5 / CAT5E • UNSHIELDED • 100 PACK

GST Invoice available, just mail back with details to order confirmation mail.

Buy direct from official UGREEN India

GST Invoice, Warranty, authenticity, faster support
Back to top