Exact-SKU research guide · 90326
UGREEN CD278 90326 25W 3-in-1 MagSafe Charging Station
A white three-device Apple charging station with a 15W certified MagSafe phone module, dedicated 5W Apple Watch module and 5W wireless earbud pad.
25W station total15W MagSafe phone5W Watch + 5W earbudsMFi + MFM certifiedAdapter not included
Overview
UGREEN 90326 / CD278 combines three different wireless charging modules on one adjustable stand. The upper phone module is Apple MagSafe certified for up to 15W on compatible MagSafe iPhone models. The watch module provides up to 5W for compatible Apple Watch generations, and the lower Qi pad provides up to 5W for compatible wireless-charging AirPods or earbud cases. The advertised 25W is therefore a simultaneous station total, not a 25W phone rating. A suitable USB-C power source is required and the wall adapter is explicitly not included.
Best-fit summary: An Apple-focused desk or bedside setup where one MagSafe iPhone, one Apple Watch and one wireless-charging earbud case need a tidy shared station.
Key features
Three dedicated modules
The magnetic phone stand, Apple Watch module and Qi earbud pad are purpose-specific and can operate together.
Adjustable viewing
The phone stand adjusts about 20–90° and can hold a compatible phone in portrait or landscape; the watch section adjusts about 0–90°.
Certified Apple path
Official UGREEN material identifies MFi and Made for MagSafe certification for the relevant charging modules.
Port map and connector roles
MagSafe phone module
Up to 15W for compatible MagSafe iPhone models with correct magnetic alignment and suitable input power.
Apple Watch module
Up to 5W for listed Apple Watch generations and SE models.
Qi earbud pad
Up to 5W for compatible wireless-charging AirPods and other appropriately sized Qi earbud cases.
USB-C power input
Accepts the supplied 5ft USB-C to USB-C cable; an AC wall adapter must be supplied separately.
Port labels matter: The top magnetic module is for the phone, the side module for Apple Watch and the base pad for an earbud case. The modules are not three generic phone pads.
Exact power allocation
| Station maximum | 25W shared when all three supported modules operate at their documented ceilings. |
|---|---|
| MagSafe phone | Up to 15W on a compatible MagSafe iPhone. |
| Apple Watch | Up to 5W on the dedicated watch module. |
| Earbud case | Up to 5W on the Qi base pad. |
| Three-device use | 15W + 5W + 5W = 25W under compatible conditions. |
| Power source | Wall adapter not included; use a stable USB-C source that satisfies the exact product/manual input requirement. |
Read this before connecting several devices: 25W is the combined station budget. This older certified MagSafe model is not a Qi2/Qi2.2 25W phone charger.
Charging protocols and speed logic
The phone path uses Apple’s certified MagSafe system for up to 15W, the watch path is built for compatible Apple Watch charging and the base uses Qi wireless charging for compatible earbud cases. Wireless rate depends on the device, alignment, case, temperature and power source. Do not translate the station total into a phone charging rate or assume that any magnetic case creates full MagSafe certification.
MagSafe, not Qi2
90326 predates the newer Qi2 25W class. Its certified phone ceiling is 15W.
Alignment matters
A thick or misaligned case increases the coil gap, creates extra heat and can reduce or interrupt charging.
Thermal taper
The phone or station may lower wireless power when warm or near full charge; this is expected behaviour.
Compatible devices and systems
MagSafe iPhone
Best supported phone fit is iPhone 12-series and later models with native MagSafe, subject to the model’s own charging limits and software.
Apple Watch
Official India materials list Apple Watch Series 1–7 and SE-era compatibility. Later models should be checked against current UGREEN support before making a speed promise.
AirPods / Qi earbuds
Compatible AirPods and other wireless-charging earbud cases can use the 5W base when centred correctly.
Other Qi phones
The old India copy lists selected 7.5W Qi phones, but magnetic attachment and the 15W certified path should not be assumed for Android or non-MagSafe hardware.
Compatibility rule: Treat the station as Apple-first: native MagSafe phone, compatible Apple Watch and a small Qi earbud case. Verify each device category independently.
Use scenarios
Bedside charging
Place all three Apple essentials on one station while keeping cards and metal objects away from the charging areas.
Video and calls
Rotate the attached iPhone and adjust the 20–90° phone angle for hands-free viewing while it charges.
Office desk
Keep phone notifications visible and use the lower pad for an earbud case between meetings.
Travel desk
The station reduces cable clutter, but it still needs its supplied USB-C cable and a separately provided compatible wall adapter.
Setup and usability guidance
- Place the station on a stable, dry surface and connect the supplied USB-C cable to a suitable USB-C power source; the wall adapter is not included.
- Remove bank cards, keys, coins, metal rings, magnetic plates and other conductive objects from every charging surface.
- Use a bare compatible iPhone or a thin MagSafe-compatible case, centre it on the magnetic phone module and confirm the on-screen charging indicator.
- Place the Apple Watch on its dedicated watch module and a compatible wireless-charging earbud case centrally on the base pad.
- Adjust phone and watch angles gently within their documented ranges without forcing the hinges.
- If all three modules do not charge, first test the station with one device at a time and verify the external USB-C power source.
Setup principle: Correct input power, clean charging surfaces and accurate device placement are all required.
Everyday usability and care
Portrait or landscape
The magnetic phone can rotate without moving the base when the attachment is secure.
Watch angle
Adjust the watch section gently between its stored and raised positions; do not use the watch as a handle.
Case choice
Use a MagSafe-compatible case without a wallet, stand, metal plate or thick decoration over the receiving coil.
Visual confirmation
Always check the phone/watch/case charging indicator; physical placement alone does not prove energy transfer.
Clean all charging faces with a soft dry cloth. Grit caught between a device and the stand can scratch surfaces, while liquid or metal debris can cause unsafe or unreliable operation.
What this product does
- Charges three compatible Apple-device categories from one station: a MagSafe iPhone, Apple Watch and wireless-charging earbud case.
- Uses magnetic alignment for the phone and dedicated charging areas for the watch and earbud case.
- Lets the phone remain visible in portrait or landscape while charging.
- Operates without an app, pairing process, account or data connection.
- Presents the phone for hands-free viewing while the other two Apple accessories charge.
What this product does not do
- It is not a Qi2 or Qi2.2 25W phone charger; 25W is the station total of 15W + 5W + 5W.
- It does not include an AC wall adapter and it does not charge through a Lightning or USB data connection.
- It is not intended to magnetically hold ordinary non-MagSafe phones without an appropriate compatible case or receiver.
- It does not transfer data, sync a watch or pair AirPods.
- It does not provide Qi2 15W or Qi2.2 25W certification and should not be merged with newer MagFlow specifications.
What to do
- Confirm all three devices show charging before leaving the station.
- Use the supplied USB-C cable and a stable power source that meets the product input requirement.
- Keep the charging faces and device backs clean and free of grit.
- Use MagSafe-compatible cases and remove thick, metal-backed or card-holding cases.
- Allow devices to cool if wireless charging slows because of temperature.
- Confirm a stable magnetic hold before rotating the phone between portrait and landscape.
What not to do
- Do not place cards, coins, keys, foil, magnetic plates or other metal between a device and a charging coil.
- Do not force a hinge beyond its normal travel or lift the entire station by an attached phone.
- Do not use the station on wet, soft or heat-trapping surfaces.
- Do not expect the 15W phone mode from every Qi phone or through every case.
- Do not continue use after liquid ingress, impact damage, swelling, odour or persistent abnormal heat.
- Do not place an Apple Watch on the earbud pad or a phone on the watch module and expect equivalent charging.
Warnings and limitations
- Wireless charging creates more heat and energy loss than a direct cable; the phone may reduce speed to manage temperature.
- Magnetic strength and alignment depend on the phone and case. Always confirm a stable attachment before rotating the screen.
- Implanted medical-device users should follow the device maker’s magnetic-separation guidance.
- The included cable does not replace the missing wall adapter; a suitable USB-C power source is required.
- Broad Android compatibility text on the India page does not make non-MagSafe phones equivalent to the certified Apple phone path.
- The old India page’s broad Android examples are not used as a universal magnetic-fit or 15W promise.
Stop-use trigger: Disconnect immediately for arcing, smoke, burning smell, melted material, visible deformation or repeated unexplained power loss.
Troubleshooting
Phone attaches but does not charge
Remove the case, wipe both surfaces, reconnect the power source and centre a known-compatible MagSafe iPhone.
One of three devices is missing
Test that device alone on its dedicated module; then confirm the external adapter can support simultaneous operation.
Charging is slow or stops
Allow the device to cool, remove a thick case and verify that no metal or card is trapped between the coils.
Watch or earbuds do not charge
Confirm wireless-charging capability, correct orientation and exact placement. Connector shape or case appearance is not enough.
Useful diagnostic: If the complete setup is unstable, remove all three devices, reconnect the USB-C input, then add phone, watch and earbud case individually. This separates placement issues from insufficient input power.
Technical specifications
| Brand / model / SKU | UGREEN CD278 / 90326 |
|---|---|
| Charging type | 3-in-1 certified MagSafe + Apple Watch + Qi earbud station |
| Maximum station total | 25W |
| Phone module | Up to 15W for compatible MagSafe iPhone |
| Watch module | Up to 5W for compatible Apple Watch |
| Earbud pad | Up to 5W for compatible Qi wireless-charging case |
| Phone angle | Approximately 20–90° adjustable |
| Watch angle | Approximately 0–90° adjustable |
| Input connector | USB-C |
| Included cable | USB-C to USB-C, 5ft / approximately 1.5m |
| Listed dimensions | Approximately 16.99 × 8.71 × 10.01cm |
| Listed weight | Approximately 447g |
| Colour | White |
| Wall adapter | Not included |
Package contents
Exact UGREEN India package: 1 × 90326 three-in-one charging station, 1 × 5ft USB-C to USB-C cable, 1 × instruction brochure, 1 × tips card and 1 × user manual. The power adapter is explicitly not included.
- Match SKU 90326 / model CD278.
- Buy only if a 15W phone ceiling meets the need; 25W is the station total.
- Ensure the phone/case supports MagSafe magnetic alignment.
- Provide a suitable USB-C wall adapter separately.
SKU assurance: This guide is written for SKU 90326 / model CD278. Do not transfer its power table or package claims to a similar-looking product.
Product-specific FAQ
What is the maximum charging output?
The station total is up to 25W: phone up to 15W, Apple Watch up to 5W and earbud case up to 5W.
How does power change with multiple devices?
The three dedicated modules can operate together at 15W + 5W + 5W under compatible conditions. 25W is not delivered to one phone.
Which devices are the charging areas designed for?
It is designed primarily for compatible MagSafe iPhones, Apple Watch and wireless-charging AirPods/earbud cases. It is not a general three-phone charger.
Which output or charging area should I use first?
Place the iPhone on the magnetic upper module, Apple Watch on the watch module and earbud case centrally on the base pad.
Which fast-charging standards does it support?
It uses certified MagSafe for the phone, an Apple Watch charging module and Qi for the earbud pad. It is not Qi2 or Qi2.2.
Is a wall power adapter included?
There is no mains plug because no wall adapter is included. Supply a suitable USB-C power adapter and use the supplied 5ft C-to-C cable.
Why can charging pause or restart?
Wireless charging may pause if the device shifts, warms up or the input source is unstable. Re-centre the device and verify external power.
Why can real charging speed be lower than the printed wattage?
Wireless speed varies with alignment, case thickness, device temperature, battery level and input power. The device may deliberately reduce power.
Do any of these connectors transfer data?
No. The station provides charging only; it does not sync an iPhone, Watch or AirPods or move files.
What is included in the package?
Station, 5ft USB-C to USB-C cable, instruction brochure, tips card and manual. The wall adapter is not included.
How do I confirm this exact model?
Match SKU 90326 / CD278. Do not apply specifications from newer UGREEN Qi2 or MagFlow stations that look similar.
