Ugreen | SKU: 50966

57% off

New arrival

UGREEN 50966 Bidirectional 2-Port HDMI Switch, 4K60

Name: UGREEN 50966 Bidirectional 2-Port HDMI Switch, 4K60
Brand: Ugreen
SKU: 50966
Price: 949.00 INR
Availability: InStock

Rs. 949.00 Rs. 2,220.00

Tax included Shipping calculated at checkout.

Crystal Clarity

Smooth Switch

Vivid 4K

Dual Flex

Simple Control

2↔1 SELECTOR • ONE ACTIVE PATH • NO POWER

UGREEN 50966 Bidirectional 2-Port HDMI Switch, 4K60

UGREEN 50966 is a passive-style manual bidirectional HDMI selector that works as either two sources to one display or one source to one of two displays. This buying guide makes the port direction, display behavior, power, cable requirements and limitations clear before installation.

Exact SKU 50966Up to 4096 × 2160 at 60Hz; 1080p120 also listedBIDIRECTIONAL

UGREEN 50966 compact bidirectional two port HDMI switch — **SKU 50966:** Exact-model overview: the button selects one active HDMI path in either a two-source or two-display arrangement.

1

Overview

Mode A: two HDMI sources → button selects one → one display. Mode B: one HDMI source → button selects one → one of two displays. It never drives both display branches simultaneously.

Correct direction is the first troubleshooting check. Similar-looking HDMI, DisplayPort and USB-C products can require completely different source and display sides.

UGREEN 50966 connected with two HDMI cables and LED indicators — **SKU 50966:** All three sockets carry HDMI; their input or output role depends on whether the unit is wired 2-to-1 or 1-to-2.

2

Key features

Inputs

Three identical HDMI sockets used according to the chosen 2-in/1-out or 1-in/2-out arrangement

Outputs

One selected HDMI path at a time

Video ceiling

Up to 4096 × 2160 at 60Hz; 1080p120 also listed

Power

No external power required

UGREEN 50966 compact lightweight HDMI selector beside a handheld console — **SKU 50966:** The compact unpowered selector is easy to place near a monitor or entertainment setup, while connected cables still need strain relief.

3

How switching and multi-display behavior works

Bidirectional describes port arrangement, not simultaneous duplication. In 1-in/2-out use only the selected display works. A 3–7 second HDMI re-handshake after switching is listed, and the unit defaults to Port 1 because it has no memory.

Control: Single hardware selection button with LED indicators.

Never assume: a product advertised as “bidirectional,” “splitter” or “matrix” behaves like another topology. Follow the exact source/output map above.

4

Verified resolution, refresh and feature boundary

Maximum listed mode

Up to 4096 × 2160 at 60Hz; 1080p120 also listed

Interface boundary

HDMI 2.0 interface is listed

Audio path

Compatible HDMI audio pass-through; the exact listing names DTS-HD, Dolby TrueHD, LPCM 7.1, DTS, Dolby AC-3 and DSD. The selector does not decode audio.

Complete-path rule

Source, every cable, selector/distributor, display input, EDID and protected-content requirements must all agree. One weaker component can lower or blank the link.

UGREEN 50966 4K60 HDR and 18Gbps feature artwork — **SKU 50966:** 4K60 HDR is conditional on the complete 18Gbps-capable path; the selector cannot raise an endpoint or cable beyond its own support.

5

Use scenarios

Scenario 1

Share one display between a PC and console

Scenario 2

Choose between television and projector for one player

Scenario 3

Keep two work computers wired to one monitor

Scenario 4

Avoid repeatedly reconnecting a single HDMI display cable

UGREEN 50966 switching one display between a game console and media player — **SKU 50966:** A practical 2-in/1-out setup keeps two sources attached to one display and changes the active source with the hardware button.

6

Setup and usability guidance

Step 1: Decide whether the layout is 2 sources → 1 display or 1 source → 2 selectable displays.
Step 2: Connect only according to that layout; all three sockets are HDMI but their role depends on direction.
Step 3: Use the button to select Port 1 or Port 2.
Step 4: Allow several seconds for HDMI and HDCP re-handshake after switching.
Step 5: If blank, test at 1080p60 with one short cable on each side.
Step 6: Do not expect both displays to light at once in 1-in/2-out mode.

Best first test: one source, one short cable path, one display and 1080p60. Expand only after this baseline works.

UGREEN 50966 one button HDMI switching with no external power supply — **SKU 50966:** No power adapter is required. Connect short verified HDMI cables, press the button and allow the normal HDMI re-handshake to complete.

7

Compatible devices and systems

Compatible system boundary

Standard HDMI sources and displays that agree on resolution, colour, audio and content protection. Works with computers, consoles, media players, TVs, monitors and projectors within those limits.

Cable planning

Use short, verified HDMI cables for high-bandwidth modes. The exact SKU page does not provide one universal 4K60 length ceiling, so no unsupported distance is promised.

Audio planning

Compatible HDMI audio pass-through; the exact listing names DTS-HD, Dolby TrueHD, LPCM 7.1, DTS, Dolby AC-3 and DSD. The selector does not decode audio.

Power planning

No external power required

UGREEN 50966 HDMI laptops PCs consoles players TVs monitors and projectors — **SKU 50966:** Standard HDMI equipment can be used when the source, cable and selected display agree on video, audio and protected-content requirements.

8

What this product does

Follows this path: Mode A: two HDMI sources → button selects one → one display. Mode B: one HDMI source → button selects one → one of two displays. It never drives both display branches simultaneously.
Supports its exact ceiling: Up to 4096 × 2160 at 60Hz; 1080p120 also listed.
Uses these ports: Three identical HDMI sockets used according to the chosen 2-in/1-out or 1-in/2-out arrangement → One selected HDMI path at a time.
Handles control this way: Single hardware selection button with LED indicators.
Passes compatible audio: Compatible HDMI audio pass-through; the exact listing names DTS-HD, Dolby TrueHD, LPCM 7.1, DTS, Dolby AC-3 and DSD. The selector does not decode audio.

9

What this product does not do

Not a simultaneous two-display splitter
No remote or automatic switching
No source memory after the path is reset
No USB, keyboard/mouse or capture function
Does not increase resolution or refresh rate

UGREEN 50966 one input two outputs with only one monitor active — **SKU 50966:** In 1-in/2-out use, only the selected display works. This is a selector—not a simultaneous two-screen splitter or desktop extender.

10

What to do

Label

Label every source, output and power cable before installation.

Build gradually

Start at 1080p60 with one display, then add outputs or increase resolution in stages.

Verify cables

Use short, verified cables for 4K/high-refresh operation and replace suspect cables before changing advanced settings.

Power safely

Keep ventilation openings clear and use only the specified power arrangement.

Record settings

Save working resolution, HDR, HDCP and audio settings for future troubleshooting.

11

What not to do

Do not reverse

Do not infer reverse direction or simultaneous outputs beyond the exact topology.

Do not confuse

Do not treat a switch as a splitter, a splitter as a switch, or either as a capture device.

Do not assume scaling

Do not assume every display can use its own independent resolution or refresh rate.

Do not force

Do not force connectors, hot-plug damaged cables or use an unverified power supply.

Do not overclaim

Do not promise DSC, MST, eARC, VRR or gaming modes unless this exact SKU explicitly lists them.

12

Warnings and limitations

Power: No external power required.
Display negotiation: mixed displays can force a lower common mode or create a blank screen.
Protected content: HDCP must be supported end to end; the device cannot bypass protection.
Heat and moisture: indoor use only; keep dry, ventilated and away from direct heat.
Cables: Use short, verified HDMI cables for high-bandwidth modes. The exact SKU page does not provide one universal 4K60 length ceiling, so no unsupported distance is promised.

13

Technical specifications

Brand / SKU	UGREEN 50966
Product type	a passive-style manual bidirectional HDMI selector that works as either two sources to one display or one source to one of two displays
Signal path	Mode A: two HDMI sources → button selects one → one display. Mode B: one HDMI source → button selects one → one of two displays. It never drives both display branches simultaneously.
Inputs	Three identical HDMI sockets used according to the chosen 2-in/1-out or 1-in/2-out arrangement
Outputs	One selected HDMI path at a time
Power	No external power required
Topology	Bidirectional 2-to-1 or 1-to-2 selector
Simultaneous displays	1 only
Listed maximum	4096×2160@60Hz
Other listed mode	1080p@120Hz
External power	Not required
Switching delay	3–7 seconds listed
Memory	No; Port 1 is default

14

Troubleshooting checklist

No picture

Confirm direction, power, active source and display input. Test one display at 1080p60 with short cables.

Picture drops

Replace one cable at a time, reduce resolution/refresh and disconnect extra outputs until the failing leg is isolated.

Wrong resolution

Choose a mode supported by every connected display and check the exact EDID or output-selection behavior.

No audio

Select the display path as the source audio output and use a format supported by the display or receiver.

Remote or hotkey fails

Use the documented control path, check battery/IR line of sight or designated keyboard port, then test the local button.

Protected video blanks

Confirm the exact HDCP level across the source, device and every active display. This product cannot bypass HDCP.

15

Package contents

In the box

1 × UGREEN 50966 bidirectional HDMI switch. HDMI cables, remote control and power adapter are not included.

16

Exact-SKU research and media reconciliation

Primary source: the exact UGREEN India page and current live Shopify record.

Visual check: Exact copy and live images confirm bidirectional port use, 4K60, one-button selection and no power. The word “splitter” is potentially misleading: only one display can be active in 1-in/2-out mode, so every section states selected-output behavior rather than duplication.

Research policy: conflicting shared artwork, adjacent-model specifications and unsupported feature combinations were excluded instead of being blended into the copy.

UGREEN 50966 product-owned 4K60 viewing scenario artwork — **SKU 50966:** The product-owned scene supports the listed 4K60 use case; real resolution and stability remain conditional on both cable legs and the endpoints.

17

Product-specific FAQ

What does UGREEN 50966 do?

It is a passive-style manual bidirectional HDMI selector that works as either two sources to one display or one source to one of two displays.

What is the exact signal direction?

Mode A: two HDMI sources → button selects one → one display. Mode B: one HDMI source → button selects one → one of two displays. It never drives both display branches simultaneously.

What is the maximum verified display mode?

Up to 4096 × 2160 at 60Hz; 1080p120 also listed. The final mode is limited by the source, every cable, the switch/splitter and the display or displays.

Can it create an extended desktop?

No independent multi-display workspace is created. Bidirectional describes port arrangement, not simultaneous duplication. In 1-in/2-out use only the selected display works. A 3–7 second HDMI re-handshake after switching is listed, and the unit defaults to Port 1 because it has no memory.

Does it need external power?

No external power required.

Does it carry audio?

Compatible HDMI audio pass-through; the exact listing names DTS-HD, Dolby TrueHD, LPCM 7.1, DTS, Dolby AC-3 and DSD. The selector does not decode audio.

Which cables are required?

Use short, verified HDMI cables for high-bandwidth modes. The exact SKU page does not provide one universal 4K60 length ceiling, so no unsupported distance is promised. Cables not named in the package contents must be supplied separately.

What should I try if there is no picture?

Confirm the signal direction and active source, attach required power, select the correct display input, reseat cables and begin at 1080p60 with one display. Add other outputs or higher modes only after a stable base link.

Can it improve resolution, refresh rate or HDCP?

No. It can only pass or route modes already supported throughout the complete connection. It cannot upgrade a source, cable or display.

What is included?

1 × UGREEN 50966 bidirectional HDMI switch. HDMI cables, remote control and power adapter are not included.

What exact-model conflicts were removed?

Exact copy and live images confirm bidirectional port use, 4K60, one-button selection and no power. The word “splitter” is potentially misleading: only one display can be active in 1-in/2-out mode, so every section states selected-output behavior rather than duplication.

Before ordering UGREEN 50966

Match the source connector, display connector, exact topology, power method and highest mode you really need. Count separately purchased HDMI, DisplayPort and USB-C cables before installation day.

SKU 509662↔1 SELECTOR • ONE ACTIVE PATH • NO POWER

GST Invoice available, just mail back with details to order confirmation mail.

Buy direct from official UGREEN India

GST Invoice, Warranty, authenticity, faster support

5 stars: 5 (83%)
4 stars: 1 (17%)
3 stars: 0 (0%)
2 stars: 0 (0%)
1 star: 0 (0%)

Works the way it needs to

Good 4k HDMI switch. Works with DDC/CI brightness control. Device is small, so it doesn't take much space

It works fine but switching time is too much.
It's take too much time mean while screen becomes blank.

Prompt and good service

Working great

01

UGREEN 50966 Bidirectional 2-Port HDMI Switch, 4K60

Let customers speak for us

UGREEN 50966 Bidirectional 2-Port HDMI Switch, 4K60

Overview