The UGREEN LP290 (80712B) is a compact magnetic vent holder that works with almost any phone. Stick one of the two included metal plates inside or on your case, and five N52 magnets hold the phone on the vent. It suits 4.7–7.2in phones up to about 300g including the case, in portrait or landscape.
5 × N52magnets
300gmax phone + case
2metal plates
4.7–7.2inphones
UGREEN LP290 Magnetic Vent Phone Holder key features
Works with any phone Two metal plates included, round and rectangular.
Five N52 magnets A firm hold on the go.
Portrait or landscape Rotate the phone on the magnetic face.
Compact Small and unobtrusive on the vent.
UGREEN LP290 Magnetic Vent Phone Holder highlights
Metal plates included
Fit a plate to the phone or case and it is ready to mount.
Steady while driving
Five N52 magnets hold up to about 300g.
Discreet design
Small enough not to clutter the dashboard.
Usage scenarios for the UGREEN LP290 Magnetic Vent Phone Holder
Navigation
Maps on the vent, within easy view.
Feature
Detail
Phone size
4.7–7.2in
Max weight
About 300g with case
Use: Fit the plate, then snap the phone on.
UGREEN LP290 Magnetic Vent Phone Holder compatibility
Device
Status
What to expect
Android phones and iPhones
Compatible
With the included metal plate
Thin or regular firm cases
Compatible
Flat mounting area
Thick wallet cases
Partly
Weaker hold
Phones over 300g with case
Not supported
Outside the rating
Horizontal air-vent blades
Compatible
Firm, undamaged blades
Round or turbine vents
Not supported
Needs a straight blade
Works with
Phones 4.7–7.2in up to 300g
Horizontal vents
Won't work with
Round vents
Heavy phones over 300g
UGREEN 80712B (LP290) LP290 Magnetic Air Vent Car Phone Holder specifications
Model
UGREEN 80712B (LP290)
Magnets
5 × N52
Phone size
About 4.7–7.2in
Max weight
About 300g with case and plate
Plates
1 rectangular, 1 round
Orientation
Portrait or landscape
What's in the box
UGREEN LP290 magnetic vent holder (80712B)
Rectangular metal plate
Round metal plate
Good to know
Plates and wireless charging. A metal plate can block wireless charging; fit it where it will not cover the charging coil, or remove it before charging.
Set the phone and route before you drive, and never adjust the mount while driving.
UGREEN LP290 Magnetic Vent Phone Holder FAQs
Will it work with my Android phone?
Yes, with the included metal plates.
How heavy a phone can it hold?
Up to about 300g including the case.
Does it fit round vents?
No.
Will the plate affect wireless charging?
It can; place it away from the charging area.
Genuine UGREEN, imported and sold by Sophus Technosol Pvt Ltd, the authorised national distributor. GST invoice with every order. 2-year India warranty.
The UGREEN LP290 (80712B) is a compact magnetic vent holder that works with almost any phone. Stick one of the two included metal plates inside or on your case, and five N52 magnets hold the phone on the vent. It suits 4.7–7.2in phones up to about 300g including the case, in portrait or landscape.
5 × N52magnets
300gmax phone + case
2metal plates
4.7–7.2inphones
UGREEN LP290 Magnetic Vent Phone Holder key features
Works with any phone Two metal plates included, round and rectangular.
Five N52 magnets A firm hold on the go.
Portrait or landscape Rotate the phone on the magnetic face.
Compact Small and unobtrusive on the vent.
UGREEN LP290 Magnetic Vent Phone Holder highlights
Metal plates included
Fit a plate to the phone or case and it is ready to mount.
Steady while driving
Five N52 magnets hold up to about 300g.
Discreet design
Small enough not to clutter the dashboard.
Usage scenarios for the UGREEN LP290 Magnetic Vent Phone Holder
Navigation
Maps on the vent, within easy view.
Feature
Detail
Phone size
4.7–7.2in
Max weight
About 300g with case
Use: Fit the plate, then snap the phone on.
UGREEN LP290 Magnetic Vent Phone Holder compatibility
Device
Status
What to expect
Android phones and iPhones
Compatible
With the included metal plate
Thin or regular firm cases
Compatible
Flat mounting area
Thick wallet cases
Partly
Weaker hold
Phones over 300g with case
Not supported
Outside the rating
Horizontal air-vent blades
Compatible
Firm, undamaged blades
Round or turbine vents
Not supported
Needs a straight blade
Works with
Phones 4.7–7.2in up to 300g
Horizontal vents
Won't work with
Round vents
Heavy phones over 300g
UGREEN 80712B (LP290) LP290 Magnetic Air Vent Car Phone Holder specifications
Model
UGREEN 80712B (LP290)
Magnets
5 × N52
Phone size
About 4.7–7.2in
Max weight
About 300g with case and plate
Plates
1 rectangular, 1 round
Orientation
Portrait or landscape
What's in the box
UGREEN LP290 magnetic vent holder (80712B)
Rectangular metal plate
Round metal plate
Good to know
Plates and wireless charging. A metal plate can block wireless charging; fit it where it will not cover the charging coil, or remove it before charging.
Set the phone and route before you drive, and never adjust the mount while driving.
UGREEN LP290 Magnetic Vent Phone Holder FAQs
Will it work with my Android phone?
Yes, with the included metal plates.
How heavy a phone can it hold?
Up to about 300g including the case.
Does it fit round vents?
No.
Will the plate affect wireless charging?
It can; place it away from the charging area.
Genuine UGREEN, imported and sold by Sophus Technosol Pvt Ltd, the authorised national distributor. GST invoice with every order. 2-year India warranty.
GST Invoice available, just mail back with details to order confirmation mail.
Buy direct from official UGREEN India
GST Invoice, Warranty, authenticity, faster support
Your cart
UGREEN
UGREEN LP290 Magnetic Air Vent Car Phone Holder with 5× N52 Magnets & Metal Plates (80712B)
Sale priceRs. 1,539.00
Regular priceRs. 2,059.00
Unit price
UGREEN LP290 • SKU 80712B
Compact magnetic phone mounting without bulky clamp arms
The UGREEN LP290 Magnetic Air Vent Car Phone Holder uses five N52 neodymium magnets and an included metal plate to hold a compatible smartphone against its padded magnetic surface. Its compact aluminium body clips onto a suitable car air-vent blade without a dashboard adhesive or windscreen suction cup.
5 × N52 magnets
Two metal plates included
Aluminium body
Portrait or landscape
Up to 300 g
Features
What it does well.
Important: this holder requires a metal plate
This is a universal magnetic mount that works through one of the included metal plates. Attach the selected plate to a compatible phone case or position it inside a sufficiently thin case according to the supplied instructions.
It is not a native MagSafe mount and should not be advertised as MagSafe-certified. Direct attachment without a metal plate may be weak or unreliable, even when the phone contains built-in magnets.
Compact magnetic convenience for compatible air vents
Five N52 magnets. Five neodymium magnets are arranged behind the padded mounting face to attract the included metal plate.
Compact L-shaped body. The slim holder occupies less dashboard space than a large mechanical phone cradle.
Serrated vent prongs. Approximately 19.8 mm serrated prongs and padded contact surfaces help grip a compatible vent blade.
No power required. The magnetic holding system requires no battery, cable, motor, app or electrical connection.
How the magnetic mounting system works
The holder’s magnets attract the metal plate attached to your phone case. The phone can then be placed directly against the padded face without opening or closing mechanical side arms. The strength of the hold depends on correct plate placement, phone weight, case thickness, vent condition and road conditions.
Installing the metal plate
Recommended: Attach an adhesive metal plate to a replaceable compatible case instead of directly to the phone’s finished rear surface.
Choose a case: use a clean, firm case with a flat back. Avoid fabric, heavily textured, oily or soft surfaces that cannot retain an adhesive plate reliably.
Clean the surface: remove dust, oil and moisture and allow the case to dry completely.
Choose the plate: select the rectangular or round plate according to the phone size, case design and required contact area.
Position centrally: place the plate near the central mounting area, away from the camera module and buttons.
Attach carefully: follow the supplied plate instructions and press evenly to establish adhesive contact.
Allow the adhesive to settle: avoid repeatedly removing or repositioning the plate immediately after attachment.
Test the hold: connect the phone to the mount and gently check stability while the vehicle is parked.
Check your car’s air vent before ordering
The fixed L-shaped holder is shown installed on a straight horizontal vent blade. Vent designs vary considerably, so inspect the blade direction, spacing, depth and strength before purchase.
Generally suitable.
May not be suitable.
Straight horizontal vent blades
Firm, undamaged vent slats
Sufficient blade depth for the 19.8 mm prongs
Adequate clearance around the holder and phone
Round or turbine-style vents
Vertical-only vent blades
Recessed, closely spaced or strongly curved vents
Loose, fragile, motorised or damaged vent assemblies
Portrait and landscape placement
The phone can be rotated against the flat magnetic surface for portrait or landscape viewing. However, this model does not have an articulated ball joint, extendable arm or independent angle-adjustment mechanism. The final screen angle follows the position of the vehicle’s vent blade.
Wireless charging and MagSafe notice
This holder does not provide wireless or wired charging.
The included metal plate can obstruct Qi or MagSafe wireless charging.
A metal plate placed between the phone and charger may cause charging failure, reduced efficiency or additional heat.
Remove the case containing the metal plate before wireless charging when necessary.
This holder is not MagSafe-certified and does not provide wireless charging.
Compact dimensions
The compact holder measures approximately 37 × 64.5 × 39 mm. Its aluminium exterior and small mounting face are designed to occupy minimal space around a compatible air vent.
Important safety and usage guidance
Install, reposition, attach or remove the phone only while the vehicle is securely parked.
Do not position the phone where it obstructs the driver’s view, controls, instruments or airbag deployment area.
Check the vent blade, mount and phone attachment before every journey.
Do not use the holder on loose, damaged, motorised or fragile vent blades.
Phone weight, case thickness, plate position, vent condition and road conditions affect holding performance.
Keep the holder and metal plates away from magnetic-stripe cards and magnetically sensitive objects.
Keep magnets at least 15 cm away from pacemakers, implanted defibrillators and other potentially affected medical devices; follow the medical-device manufacturer’s guidance.
A strong magnet may temporarily affect the phone’s compass or compass-dependent direction display.
Stop using the holder immediately if the vent clip, magnetic face, metal plate or adhesive becomes loose.
Specifications
At a glance.
Suggested screen size
Approximately 4.7–7.2 inches
Maximum combined weight
Up to approximately 300 g, including phone, case and plate
Required accessory
Included rectangular or round metal plate
Recommended case
Thin or regular firm case with a flat mounting area
Orientation
Portrait or landscape by rotating the phone on the magnetic face
In the box
1 × UGREEN LP290 Magnetic Air Vent Car Phone Holder 1 × Rectangular metal plate 1 × Round metal plate
UGREEN lists compatibility with approximately 4.7–7.2-inch smartphones weighing up to approximately 300 g, including the case and metal plate. The metal plate and total weight are more important than the phone’s brand or model name.
Phone, phone case, charging cable and other demonstration accessories are not included.
FAQs
Questions buyers ask.
Is this a MagSafe car mount?
No. It is a universal magnetic holder that requires one of the included metal plates. It is not MagSafe-certified and does not use a MagSafe alignment ring.
Does the holder charge my phone?
No. It is a passive magnetic holder with no wireless charging coil, USB port, cable, electronics or battery.
Do I have to use the metal plate?
Yes. Use the included rectangular or round plate for a reliable magnetic connection. Direct attachment without the plate may be weak or inconsistent.
Where should the metal plate be installed?
Position it centrally on a compatible phone case or inside a sufficiently thin case according to the supplied instructions. Avoid the camera area and ensure the phone remains balanced.
Will the plate affect wireless charging?
It may. A metal plate over the charging coil can block Qi or MagSafe charging and may cause additional heat. Remove the case containing the plate before wireless charging when necessary.
Can I place the phone horizontally?
Yes. Rotate the phone against the magnetic surface for portrait or landscape placement. The mount itself does not contain an adjustable ball joint.
Will it fit my car’s air vent?
It is primarily designed for straight, firm horizontal vent blades with sufficient depth. Round, turbine-style, vertical-only, recessed or unusual vent designs may not be compatible.
What is the maximum supported phone weight?
The listed maximum is approximately 300 g, including the phone, case and plate. Actual performance also depends on vent strength, plate position and road conditions.
Will magnets affect GPS navigation?
The mount does not connect electronically to the phone. However, any strong magnet may temporarily affect a phone’s compass or compass-dependent direction display. GPS and compass behaviour can vary by device.
Is it safe around pacemakers or implanted medical devices?
Magnets can affect some implanted medical devices. Keep the holder and plates at least 15 cm away and follow the instructions provided by your physician and medical-device manufacturer.
Genuine UGREEN product supplied with GST invoice availability, India-based customer assistance and a 2-year direct warranty, subject to the applicable warranty terms.
Keep the invoice, retail packaging, metal plates and product identification details for warranty assistance.