UGREEN LP945 MagSafe-Compatible Magnetic Phone Ring Holder & St...
Grip It, Stand It or Attach It to a Compatible Magnetic Surface
The UGREEN LP945 MagSafe-Compatible Magnetic Phone Ring Holder combines a finger grip, fold-out phone stand and double-sided magnetic attachment in a slim aluminium-alloy design.
- Double-sided N52 magnets
- 360° rotating ring
- Grip and kickstand
- Only 26 g
What it does well.
Three Everyday Functions in One Compact Accessory
Finger Ring Grip. Slide a finger through the ring for additional control while browsing, taking photos or holding the phone one-handed.
Fold-Out Kickstand. Open and position the ring to support compatible phones during videos, calls, reading or desk use.
Magnetic Attachment. Outward-facing magnets connect with suitable magnetic mounts and compatible steel surfaces.
Removable Design. Detach the ring holder whenever you want to use a wireless charger or carry the phone without it.
Approximately 5 mm Thin and 26 g
The ring holder measures approximately 57.8 mm across, has a listed folded thickness of approximately 5 mm and weighs approximately 26 g.
Its slim aluminium-alloy structure adds grip and stand functionality while remaining compact enough for everyday carrying. Any attached accessory will still add some thickness to the phone and may affect very tight pockets or fitted holders.
More Controlled One-Handed Phone Use
Rotate the ring around your preferred hand position and place a finger through it for additional control while browsing, scrolling, taking photos, recording videos or making video calls.
The ring holder can improve grip, but it is not a safety tether and cannot guarantee protection against drops. Always hold the phone securely.
What Does Double-Sided Magnetic Mean?
The phone-facing side attaches to a MagSafe-enabled phone, compatible magnetic case or supplied adapter ring. The outward-facing side can attach to a compatible magnetic car mount or suitable ferromagnetic steel surface.
This can provide temporary hands-free placement on suitable steel refrigerators, cabinets, racks or similar surfaces.
Not every metal is magnetic. Aluminium, copper and some grades of stainless steel may provide little or no attraction. Always test the surface and connection before releasing the phone.
Direct MagSafe Compatibility and an Adapter for Other Phones
Direct magnetic compatibility.
Compatibility using the included adhesive adapter ring.
For best adhesion, attach the adapter ring to a clean, dry and flat case. It may not bond reliably to fabric, silicone, leather, oily, textured or heavily curved surfaces.
- iPhone 17 series
- iPhone 16 series
- iPhone 15 series
- iPhone 14 series
- iPhone 13 series
- iPhone 12 series
- Compatible MagSafe cases with an integrated magnetic ring
- Compatible Samsung Galaxy phones
- Compatible Google Pixel phones
- OnePlus, Xiaomi, Redmi, Motorola, OPPO, vivo, realme and other smartphones
- Non-MagSafe iPhones and suitable non-magnetic cases
Remove the Ring Holder Before Wireless Charging
The UGREEN LP945 is a passive grip and stand. It does not contain a wireless-charging coil and does not pass charging power through the accessory.
Detach it from the phone before placing the device on a MagSafe, Qi2 or other wireless charger. Leaving the metal ring holder between the phone and charger can prevent correct alignment, interrupt charging or generate unnecessary heat.
360° Rotation and Fold-Out Stand Adjustment
Rotate the ring through 360° to place the finger opening or stand support around the required position. The folding hinge can then be opened and adjusted to support different viewing angles.
Stand stability depends on phone size, case weight, ring position, viewing angle and the flatness of the supporting surface.
- Portrait stand: Useful for video calls, reading and vertical content.
- Landscape stand: Suitable for videos, online classes, recipes and wider content.
- Low-angle stand: Useful for desk notifications and casual viewing.
- Finger grip: Rotate the opening around the hand position that feels most comfortable.
How to Attach and Use It
For a MagSafe-enabled phone or case.
For another compatible phone or case.
- Make sure the back of the phone or case and the ring holder are clean.
- Align the ring holder centrally with the phone’s MagSafe ring.
- Allow it to snap into position and check the connection before lifting the phone.
- Rotate and unfold the ring to the required grip or stand position.
- Select a clean, dry and flat case surface.
- Centre the supplied adhesive metal ring around the wireless-charging coil position where applicable.
- Remove the liner, place the ring carefully and press it evenly.
- Allow the adhesive to settle according to the supplied instructions.
- Attach the LP945 to the installed adapter ring and test the connection before normal use.
Important Usage Information
- The ring holder does not charge the phone.
- Remove it before using a wireless charger.
- The finger ring improves control but is not a drop-proof safety tether.
- Do not place bank cards, access cards or magnetic-stripe cards between the phone and holder.
- Not all metallic surfaces are magnetic; test the surface before releasing the phone.
- Do not suspend the phone above people, fragile objects, liquids or moving machinery.
- Do not rely on the outer magnet during high-impact or high-vibration activity.
- Thick cases and incorrectly positioned adapter rings can weaken attachment.
- The adhesive adapter ring may leave residue or marks when removed.
- Do not force the rotating ring or hinge beyond its normal movement range.
At a glance.
- Brand
- UGREEN
- Model
- LP945
- SKU / MPN
- 65819
- Product type
- MagSafe-compatible magnetic phone ring grip and kickstand
- Functions
- Finger grip, phone stand and double-sided magnetic holder
- Magnetic design
- Double-sided N52 magnetic structure
- Ring rotation
- 360°
- Listed hinge adjustment
- Up to approximately 180°
- Material
- Aluminium alloy
- Colour
- Grey/Black
- Diameter
- Approximately 57.8 mm
- Folded thickness
- Approximately 5 mm
- Product weight
- Approximately 26 g
- Phone attachment
- Magnetic; adhesive adapter ring supplied for compatible non-MagSafe cases
- Charging function
- None – remove before wireless charging
- Power or pairing required
- No
- Warranty
- 2 years, subject to the applicable UGREEN India warranty policy
- In the box
- 1 × UGREEN LP945 Magnetic Phone Ring Holder and Stand
1 × Adhesive magnetic adapter ring
1 × User documentation
Phone, case, charger, magnetic car mount and metal surfaces shown in the images are for demonstration only.
Questions buyers ask.
Does this ring holder charge my phone?
No. It is a passive magnetic grip and stand. Remove it before placing the phone on a wireless charger.
Which iPhones attach directly?
MagSafe-enabled iPhone 12 and later models attach directly when used without a case or with a properly designed MagSafe-compatible case.
Can an Android phone use it?
Yes, when the supplied adhesive adapter ring is correctly installed on a suitable phone case or compatible flat surface.
Can it be used with a normal phone case?
A normal case without an integrated magnetic ring requires the supplied adhesive adapter ring. Very thick, textured, silicone, leather or fabric cases may be unsuitable.
Does the ring rotate?
Yes. The ring rotates through 360° and folds outward to provide different grip and stand positions.
Can it hold the phone vertically and horizontally?
Yes. Rotate and position the ring to create portrait or landscape stand configurations. Stability depends on the phone, case and selected angle.
Will it attach to every metal surface?
No. It requires a suitably magnetic, ferromagnetic surface such as compatible steel. Aluminium, copper and some stainless steels may not attract the holder.
Can I connect it to a magnetic car mount?
The outward-facing magnetic side is designed to connect with compatible magnetic mounts. Check the connection and mount installation before beginning a journey.
Does it use adhesive on a MagSafe iPhone?
No adhesive is required for a directly compatible MagSafe phone or case. Adhesive is used only when installing the supplied adapter ring on a non-MagSafe case or device.
Can the adapter ring leave residue?
Yes. Because the adapter ring uses adhesive, residue or surface marks are possible. Installing it on a replaceable case is preferable when protecting the phone finish is important.
Genuine UGREEN product • GST invoice available • India-based customer support • Warranty support under the applicable UGREEN India policy
-
Warranty
Country of Origin: China
Manufactured by: UGREEN Group Limited
Imported & Marketed by: Sophus Technosol Private Limited, Durga Complex, 2nd Floor, #38/1, 3rd Cross, Sahakarnagar G Block, Bengaluru – 560092, Karnataka, India
Customer care: +91 94038 93363 (phone / WhatsApp) · info@ugreenindia.com · Mon–Sat, 10:30–18:00 IST
GST Invoice available, just mail back with details to order confirmation mail.
Buy direct from official UGREEN India
GST Invoice, Warranty, authenticity, faster support
