UGREEN 30756 MFi Lightning to 3.5mm Headset Adapter
The UGREEN Lightning to 3.5mm Adapter (30756) brings the headphone jack back to your Lightning iPhone or iPad. Apple MFi certification means it works reliably with every iOS update, and it supports music, the headset microphone, calls and Apple inline controls. An aluminium shell and nylon braid make it far tougher than the standard white dongle.
Certified by Apple's MFi programme, so your iPhone or iPad recognises it every time and it keeps working after iOS updates.
An aluminium shell, nylon-braided cable and reinforced wire joints stand up to daily pocket and bag use far better than a plain plastic dongle.
The built-in DAC turns your iPhone's digital audio into clean stereo for your favourite wired headphones.
Use your favourite wired headphones with a Lightning iPhone.
| You get | Result |
|---|---|
| Wired headphones | Yes |
| Inline volume and play/pause | Yes, Apple-style headsets |
| Charging at the same time | No |
Use: Lightning end into the iPhone, headphones into the 3.5mm jack.
Take calls on a wired headset or play music through the car or a speaker.
| You get | Result |
|---|---|
| Headset mic for calls | Yes |
| Car AUX and speakers | Yes, with an AUX cable |
| Android-style volume buttons | No |
Use: For the car, connect a 3.5mm male-to-male AUX cable from the jack to the stereo.
| Device | Status | What to expect |
|---|---|---|
| Lightning iPhones, up to the iPhone 14 series | Compatible | Music, mic, calls and inline controls |
| Lightning iPad and iPod touch | Compatible | iOS 10.3.1 or later |
| Car AUX and speakers | Compatible | Needs a 3.5mm AUX cable |
| Android CTIA headset volume buttons | Partly | Audio and mic work; volume buttons don't |
| OMTP headsets | Not supported | Not supported |
| USB-C iPhone 15 and later | Not supported | Needs a USB-C to 3.5mm adapter |
| Model | UGREEN 30756 |
|---|---|
| Certification | Apple MFi |
| Connector | Lightning male |
| Output | 3.5mm TRRS female |
| Headset support | Audio, microphone, calls, Apple inline controls |
| Length | About 12cm end to end |
| Build | Aluminium shell, nylon braid, reinforced joints |
| Colour | Grey / black |
| iOS | 10.3.1 or later |
Headphones and AUX cable are not included.
This adapter does not charge your iPhone. Volume buttons on Android-style headsets won't work, but audio and the mic will.
Yes. It works with all Lightning iPhones on iOS 10.3.1 or later.
Yes, so it works reliably and keeps working after iOS updates.
Yes, with a standard CTIA headset.
No. It has no charging port.
No. Those iPhones have USB-C. Use a UGREEN USB-C to 3.5mm adapter.
Yes. Connect a 3.5mm AUX cable from the adapter to the car stereo.
Genuine UGREEN, imported and sold by Sophus Technosol Pvt Ltd, the authorised national distributor. GST invoice with every order. 2-year India warranty.
The UGREEN Lightning to 3.5mm Adapter (30756) brings the headphone jack back to your Lightning iPhone or iPad. Apple MFi certification means it works reliably with every iOS update, and it supports music, the headset microphone, calls and Apple inline controls. An aluminium shell and nylon braid make it far tougher than the standard white dongle.
Certified by Apple's MFi programme, so your iPhone or iPad recognises it every time and it keeps working after iOS updates.
An aluminium shell, nylon-braided cable and reinforced wire joints stand up to daily pocket and bag use far better than a plain plastic dongle.
The built-in DAC turns your iPhone's digital audio into clean stereo for your favourite wired headphones.
Use your favourite wired headphones with a Lightning iPhone.
| You get | Result |
|---|---|
| Wired headphones | Yes |
| Inline volume and play/pause | Yes, Apple-style headsets |
| Charging at the same time | No |
Use: Lightning end into the iPhone, headphones into the 3.5mm jack.
Take calls on a wired headset or play music through the car or a speaker.
| You get | Result |
|---|---|
| Headset mic for calls | Yes |
| Car AUX and speakers | Yes, with an AUX cable |
| Android-style volume buttons | No |
Use: For the car, connect a 3.5mm male-to-male AUX cable from the jack to the stereo.
| Device | Status | What to expect |
|---|---|---|
| Lightning iPhones, up to the iPhone 14 series | Compatible | Music, mic, calls and inline controls |
| Lightning iPad and iPod touch | Compatible | iOS 10.3.1 or later |
| Car AUX and speakers | Compatible | Needs a 3.5mm AUX cable |
| Android CTIA headset volume buttons | Partly | Audio and mic work; volume buttons don't |
| OMTP headsets | Not supported | Not supported |
| USB-C iPhone 15 and later | Not supported | Needs a USB-C to 3.5mm adapter |
| Model | UGREEN 30756 |
|---|---|
| Certification | Apple MFi |
| Connector | Lightning male |
| Output | 3.5mm TRRS female |
| Headset support | Audio, microphone, calls, Apple inline controls |
| Length | About 12cm end to end |
| Build | Aluminium shell, nylon braid, reinforced joints |
| Colour | Grey / black |
| iOS | 10.3.1 or later |
Headphones and AUX cable are not included.
This adapter does not charge your iPhone. Volume buttons on Android-style headsets won't work, but audio and the mic will.
Yes. It works with all Lightning iPhones on iOS 10.3.1 or later.
Yes, so it works reliably and keeps working after iOS updates.
Yes, with a standard CTIA headset.
No. It has no charging port.
No. Those iPhones have USB-C. Use a UGREEN USB-C to 3.5mm adapter.
Yes. Connect a 3.5mm AUX cable from the adapter to the car stereo.
Genuine UGREEN, imported and sold by Sophus Technosol Pvt Ltd, the authorised national distributor. GST invoice with every order. 2-year India warranty.
Country of Origin: China
Manufactured by: UGREEN Group Limited
Imported & Marketed by: Sophus Technosol Private Limited, Durga Complex, 2nd Floor, #38/1, 3rd Cross, Sahakarnagar G Block, Bengaluru – 560092, Karnataka, India
Customer care: +91 94038 93363 (phone / WhatsApp) · info@ugreenindia.com · Mon–Sat, 10:30–18:00 IST
GST Invoice available, just mail back with details to order confirmation mail.
GST Invoice, Warranty, authenticity, faster support
UGREEN 30756 connects 3.5mm headphones, car AUX, speakers or a compatible CTIA headset to an Apple device with a Lightning port. Its signal path is Lightning male to 3.5mm TRRS female audio adapter. The physical build is MFi-certified gray-and-black adapter with approximately 10cm braided cable, aluminium shell, reinforced joints and 3.5mm female socket. This guide separates the product’s real function from similar-looking splitters, extensions and digital adapters.
connector role. Lightning male to 3.5mm TRRS female audio adapter.
Use. Connects 3.5mm headphones, car AUX, speakers or a compatible CTIA headset to an Apple device with a Lightning port.
Compatibility boundary. Lightning-equipped iPhone, iPad and iPod models supported by iOS; 3.5mm headphones, speakers, car AUX and compatible CTIA headsets.
Build and handling. MFi-certified gray-and-black adapter with approximately 10cm braided cable, aluminium shell, reinforced joints and 3.5mm female socket.
The MFi-certified electronics accept digital audio through Lightning and provide a 3.5mm analogue headset connection. Supported microphone and controls are returned through the Lightning audio interface.
Why this matters: 3.5mm plugs can look alike while carrying different numbers of contacts. TRS normally provides stereo left/right/ground; TRRS adds a microphone/control contact. Digital USB-C or Lightning audio needs conversion electronics rather than passive rewiring.
Direction check: Lightning male to 3.5mm TRRS female audio adapter. Do not buy by connector diameter alone.
Wired headphones. Continue using 3.5mm headphones with a compatible digital-audio host.
Calls and meetings. Use a compatible CTIA headset microphone and supported controls for calls.
Car and speaker AUX. Feed analogue audio to a 3.5mm input with a separate male-to-male AUX cable if required.
Home and office. Use Lightning male to 3.5mm TRRS female audio adapter where the connector direction matches the equipment.
Travel kit. The compact form is easy to keep with the device whose port standard it matches; label it SKU 30756 to avoid mixing similar adapters.
Comfort rule: start playback at a low volume. A new adapter can expose a different device volume setting than the one used previously.
Compatibility class: Lightning-equipped iPhone, iPad and iPod models supported by iOS; 3.5mm headphones, speakers, car AUX and compatible CTIA headsets.
Connector first. Confirm the male/female connector, TRS/TRRS contact count and input/output direction. Brand name alone does not prove fit.
Host capability. For USB-C, Lightning or Bluetooth products, the host must support the relevant audio function. For passive cables, both endpoints must already provide analogue audio.
Headset standard. CTIA and OMTP four-pole wiring are not interchangeable in every product. Inline button behaviour can also differ by phone, headset and operating system.
Cases and recessed sockets. A protective case, recessed jack or closely spaced panel can prevent full seating even when the nominal connector matches.
Match this SKU. Use 30756 only when Lightning male to 3.5mm TRRS female audio adapter matches the required direction.
Seat connectors fully. Push straight into clean sockets while equipment volume is low. A half-seated plug is a common cause of missing channels or microphone failure.
Test each function. Check stereo left/right, microphone, calls and controls separately; not every contact or button applies to every product.
Protect device ports. Leave slack, avoid side load and disconnect by the housing so the small audio socket is not used as a lever.
Do not force a plug. Stop if the connector does not align or seat. Check case clearance, debris, plug diameter and male/female direction.
Do not assume TRS equals TRRS. Count the contacts and confirm stereo-only versus headset microphone/control requirements before connecting.
Do not pull the cable. Grip the connector housing. Pulling, twisting or sharply folding the cable can damage conductors and device sockets.
Do not connect live at high volume. Lower or mute amplification before changing analogue connections to avoid pops, feedback or unexpectedly loud sound.
Hearing safety: begin at low volume and limit exposure. An adapter does not provide hearing protection.
Compatibility: not for USB-C iPhone or iPad models; not a charger splitter; OMTP headsets are unsupported; Android CTIA headset volume buttons are not supported.
Environment: keep connectors dry, clean and away from extreme heat. Do not use a damaged or corroded plug.
Vehicles: pair, route and adjust controls while parked. Hands-free hardware does not remove the need to follow local driving and phone-use laws.
1. Identify the job. Connects 3.5mm headphones, car AUX, speakers or a compatible CTIA headset to an Apple device with a Lightning port.
2. Check direction. Lightning male to 3.5mm TRRS female audio adapter.
3. Check contact standard. Decide whether the requirement is stereo TRS, CTIA headset TRRS, Bluetooth reception, USB Audio or Lightning audio.
4. Check limitations. not for USB-C iPhone or iPad models; not a charger splitter; OMTP headsets are unsupported; Android CTIA headset volume buttons are not supported.
No audio. Confirm the source output, destination input and operating-system output selection. Reseat both ends with any obstructing case removed.
One channel only. Lower volume, cleanly reseat the plug and test with another known-good headphone/source. A partially inserted TRS/TRRS plug often drops a channel.
Microphone missing. Verify this SKU carries a microphone path, then check CTIA/OMTP wiring, input selection, app permissions and mute controls.
Buzz or crackle. Keep connections away from power noise, stop cable movement, clean dry plugs and test components one at a time to identify a worn socket or cable.
Controls behave oddly. Device and headset manufacturers can map inline buttons differently. Remove parallel splitters, confirm the standard and test basic audio before controls.
Level is too low. Check source and destination volume independently. Passive cables do not amplify; digital adapters still depend on host volume, DAC output and headphone load.
Match SKU 30756, Lightning male to 3.5mm TRRS female audio adapter, 10cm cable / about 12cm total and the stated compatibility boundary. Similar UGREEN audio cables can differ in TRS/TRRS contacts, direction, digital conversion, microphone support and colour.
1 × UGREEN 30756 MFi Lightning-to-3.5mm audio adapter
No phone, computer, headphones, car stereo, speaker, charger or additional adapter is included unless explicitly named above.
Connects 3.5mm headphones, car AUX, speakers or a compatible CTIA headset to an Apple device with a Lightning port.
Lightning male to 3.5mm TRRS female audio adapter. Match both ends before purchase.
The host supplies power. Normally no separate app is required, but the host must support the relevant digital audio interface.
Compatible CTIA microphone/calls work. Apple-headset controls are supported; Android CTIA volume buttons and OMTP are not.
Only if the plug housing can seat fully. A deep or narrow case opening can block complete insertion; never force the connector.
It provides the documented connection. Real noise, level and fidelity depend on the source, destination, file, amplification, socket condition and environment; it is not a universal amplifier or sound enhancer.
Only in the compatible headset arrangement described above. It is not a universal professional microphone interface.
Lower volume, push each plug fully into a clean socket, remove an obstructing case and test each source/headphone separately. A half-seated TRS/TRRS plug commonly loses a channel.
It is a consumer audio accessory, not presented as a balanced professional interface, isolated splitter or stage-rated installation cable.
Possibly, but each extra joint can add fit, wiring and signal-level uncertainty. Check TRS/TRRS standard and direction at every step, then test at low volume.
1 × UGREEN 30756 MFi Lightning-to-3.5mm audio adapter.
