Quality is good Plug n Play Works fine for Asus Rampage IV Black edition Motherboard as boot drive with WD 1 TB NVME Speed is 4700 Mbps Read N Write 3820 Mbps Fantastic Adapter Reviw it after 6 moth about durability
The UGREEN HDMI 2.1 Cable (80404) connects a PS5, Xbox Series X, gaming PC, Apple TV or 4K/8K TV with 8K60/4K120 video and 48Gbps bandwidth. It supports 4K at high refresh rates for smooth gaming, HDR and Dolby Vision, and eARC for lossless sound to your soundbar or AV receiver.
8K60video
4K120high refresh
eARClossless audio
3mbraided
UGREEN HDMI 2.1 Cable key features
8K60/4K120 video Sharp, smooth picture for TVs and monitors.
48Gbps bandwidth Full HDMI 2.1 speed.
HDR and Dolby Vision Brighter highlights, richer colour.
eARC Lossless audio to a soundbar or receiver.
Braided, zinc alloy plugs Tough and tangle-resistant.
Turn on high-refresh mode. For 4K120 or 8K, use an HDMI 2.1 port on the TV and turn on its enhanced HDMI / input signal plus setting.
PS5 and Xbox Series X need 120Hz turned on in their video settings.
UGREEN HDMI 2.1 Cable FAQs
Does it support 4K 120Hz for PS5?
Yes, with a TV that has an HDMI 2.1 port and 120Hz turned on.
Does it support eARC?
Yes, for lossless audio to a soundbar or receiver.
Will it work with my laptop?
Yes, if the laptop has an HDMI port. For USB-C laptops, use a USB-C to HDMI cable.
Is 3m too long?
No.
Does it need power?
No.
Genuine UGREEN, imported and sold by Sophus Technosol Pvt Ltd, the authorised national distributor. GST invoice with every order. 2-year India warranty.
The UGREEN HDMI 2.1 Cable (80404) connects a PS5, Xbox Series X, gaming PC, Apple TV or 4K/8K TV with 8K60/4K120 video and 48Gbps bandwidth. It supports 4K at high refresh rates for smooth gaming, HDR and Dolby Vision, and eARC for lossless sound to your soundbar or AV receiver.
8K60video
4K120high refresh
eARClossless audio
3mbraided
UGREEN HDMI 2.1 Cable key features
8K60/4K120 video Sharp, smooth picture for TVs and monitors.
48Gbps bandwidth Full HDMI 2.1 speed.
HDR and Dolby Vision Brighter highlights, richer colour.
eARC Lossless audio to a soundbar or receiver.
Braided, zinc alloy plugs Tough and tangle-resistant.
Turn on high-refresh mode. For 4K120 or 8K, use an HDMI 2.1 port on the TV and turn on its enhanced HDMI / input signal plus setting.
PS5 and Xbox Series X need 120Hz turned on in their video settings.
UGREEN HDMI 2.1 Cable FAQs
Does it support 4K 120Hz for PS5?
Yes, with a TV that has an HDMI 2.1 port and 120Hz turned on.
Does it support eARC?
Yes, for lossless audio to a soundbar or receiver.
Will it work with my laptop?
Yes, if the laptop has an HDMI port. For USB-C laptops, use a USB-C to HDMI cable.
Is 3m too long?
No.
Does it need power?
No.
Genuine UGREEN, imported and sold by Sophus Technosol Pvt Ltd, the authorised national distributor. GST invoice with every order. 2-year India warranty.
UGREEN 80404 is a 3 metres passive copper full-size HDMI Type-A male-to-male cable rated up to 48Gbps. Either plug may face the source.
3 metresCable length
Up to 48GbpsMaximum stated bandwidth
Dynamic HDRHDR / video features
Up to 8K at 60HzMaximum stated 8K mode
Features
What it does well.
Key features
Verified at a glance
48Gbps class bandwidth. Rated cable capacity, not internet speed or a guarantee that every connected port exposes every mode.
Up to 8K at 60Hz. Requires a compatible source, display, content path, firmware and selected signal format.
Up to 4K at 120Hz. The exact title, written specification and official HD140 family source verify 4K at 120Hz. Conflicting 4K240 gallery text is not used.
3m passive copper run. No active electronics, external power adapter or Source/Display orientation is required.
HDR and audio carriage. Carries Dynamic HDR, Dolby Vision, HDR10+, eARC on compatible systems.
Video performance and bandwidth
Resolution without guesswork
Model 80404 is rated up to 48Gbps and up to 8K at 60Hz or 4K at 120Hz. Those labels describe the cable’s supported ceiling under compatible conditions; they do not force a source to output that mode.
A television or monitor may reserve its highest-bandwidth mode for selected HDMI ports or require an “Enhanced”, “Input Signal Plus”, “Deep Colour”, “8K”, “4K high frame rate” or similarly named input option. Consult the display manual because menu names vary.
Any AV receiver, switch, splitter, wall plate, adapter, dock or capture device in the path must also support the selected mode.
Gaming and refresh-rate guidance
Smooth modes need a complete compatible chain
The exact listing identifies gaming-related signalling such as VRR, ALLM, QFT, QMS. Each function must also exist on the console or GPU, game, display, firmware and selected HDMI port.
PlayStation 5 and Xbox Series X commonly target supported modes up to 4K at 120Hz. Even when this cable is rated for 4K at 120Hz, it cannot make a console or game output a refresh rate the console does not provide.
Select the correct HDMI input and enable the display’s enhanced/high-frame-rate input mode.
HDR and eARC audio
The cable carries formats; it does not create them
Verified picture/audio features for this exact listing include Dynamic HDR, Dolby Vision, HDR10+, eARC. The source, content, application, display and any AV equipment must support the chosen format.
Dynamic HDR or Dolby Vision requires compatible encoded content and an enabled display. An HDMI cable does not convert SDR to HDR and cannot add brightness, contrast or colour capability that the screen does not have.
ARC fallback operates within the older ARC format limits when eARC is not available throughout the connection.
Passive copper construction
Non-directional everyday installation
Braided passive-copper HD140 cable with oxygen-free copper conductors, internal shielding, reinforced strain relief and nickel-plated contacts.
The product is described as a 48Gbps HDMI cable. Official certification is not claimed unless the received package carries a valid matching label and QR code.
Outer construction: Braided outer layer over a flexible cable body.
Use scenarios
Practical connection planning
Console to TV or monitor. Use the 3m run when both devices have full-size HDMI ports and the route reaches without tension.
PC or laptop to display. Connect a computer with a compatible full-size HDMI output; USB-C-only systems need an adapter or dock rated for the desired mode.
Media player to home cinema. Connect a streaming box or Blu-ray player to a television or AV receiver, within the capabilities of every port in the path.
Compatible devices and systems
Full-size HDMI Type-A fit
Sources. Consoles, GPUs, HDMI laptops, media players and AV receivers with full-size HDMI output.
Displays. TVs, monitors and projectors with full-size HDMI input at a mutually supported mode.
Audio equipment. Compatible receivers and soundbars; use labelled eARC/ARC ports for audio return.
Both ends are full-size HDMI Type-A male; this cable does not convert USB-C, DisplayPort, Mini/Micro HDMI, DVI or VGA.
Setup and usability guidance
Connect, configure, verify
Measure the route and confirm 3m reaches both ports without stretching or leaving either connector under sideways load.
Connect either plug to the HDMI output on the source because this passive copper model is non-directional.
Connect the other plug to the selected HDMI input on the display, receiver or soundbar and choose that input.
Enable the display’s enhanced/high-bandwidth HDMI input mode where required, then select resolution, refresh rate and HDR on the source.
Check before buying
Important limitations
Confirm every point that affects your intended mode:
The required route is suitable for 3m without tension, sharp bends or unnecessary excess.
The source HDMI output and display HDMI input both support the intended mode, up to this model’s verified ceiling of 8K60 or 4K120.
Any receiver, switch, splitter, capture device, dock, adapter, wall plate or extension between the endpoints supports the same bandwidth, HDR, HDCP and audio features.
The source content, game, GPU/console firmware and display input settings support the requested resolution and refresh rate.
What this product does
Scope and boundaries
Carries compatible digital HDMI video and audio between two full-size HDMI ports.
Provides a cable path rated up to 48Gbps and up to 8K60 or 4K120 for compatible systems.
Passes supported features from this exact listing, including Dynamic HDR, Dolby Vision, HDR10+, VRR, ALLM, QFT, QMS, eARC, 3D.
It does not add 8K, a higher refresh rate, HDR, VRR, eARC or an audio codec to equipment that lacks that capability.
It does not upscale content, decode surround sound, generate extra frames or make an older HDMI port operate as a newer one.
It does not convert USB-C, DisplayPort, Mini HDMI, Micro HDMI, DVI or VGA to full-size HDMI.
What to do
Care and installation practice
Hold the connector housing when inserting or removing the plug; align it carefully with the HDMI port.
Leave a relaxed service curve behind the display and support the cable so the port carries no weight.
Update source and display firmware, use the correct high-bandwidth ports and verify the selected input mode.
Do not pull by the cable body, force a misaligned connector or leave the plug under lateral tension.
Do not sharply bend, knot, crush, staple, pinch under furniture or route beside heat or moisture.
Do not advertise or select a mode beyond this exact model’s verified 4K120/8K60 ceiling.
Warnings and limitations
Read before installation
Maximums are negotiated. 48Gbps, 8K60 and 4K120 are ceiling capabilities. The lowest-capability source, port, intermediate device, display, format or setting controls the result.
Protect the HDMI ports. The cable is flexible, but HDMI sockets are not load-bearing. Avoid tension, tight turns and pulling on the cable body.
Feature support is end to end. HDR, VRR, ALLM, eARC, HDCP and audio formats operate only when supported and enabled across every relevant device.
Adapters can lower the ceiling. USB-C docks, DisplayPort adapters, AV receivers, splitters, switches and wall plates may cap bandwidth or omit features even if this cable is capable.
Specifications
At a glance.
Brand
UGREEN
Model / SKU
HD140 / 80404
Product type
Passive copper HDMI cable
Cable length
3 metres
Connectors
Full-size HDMI Type-A male to HDMI Type-A male
Direction
Non-directional: either plug may face source or display
Maximum stated bandwidth
Up to 48Gbps
Maximum stated 8K mode
Up to 8K at 60Hz with a fully compatible chain
Maximum verified 4K mode
Up to 4K at 120Hz with a fully compatible chain
HDR / video features
Dynamic HDR, Dolby Vision, HDR10+, VRR, ALLM, QFT, QMS, 3D
Audio return / audio formats
eARC
Outer construction
Braided outer layer over a flexible cable body
Power
No external power; passive copper construction
Certification wording
The product is described as a 48Gbps HDMI cable. Official certification is not claimed unless the received package carries a valid matching label and QR code.
In the box
1 × UGREEN 80404 3m passive copper HDMI cable
Verified exact-model details
Verified in the box
Televisions, monitors, consoles, computers, adapters, receivers, soundbars and other devices shown in lifestyle images are not included. Package artwork may vary; verify SKU 80404 and 3m on the received product.
FAQs
Questions buyers ask.
Does model 80404 support 8K at 60Hz?
It is listed for up to 8K60 when the source, display, HDMI ports, content path, firmware and selected signal format all support it.
What is the verified maximum 4K mode?
The verified ceiling is 4K at 120Hz. Actual availability depends on the source/GPU, display, port, colour format, settings and content.
Does 48Gbps guarantee the highest mode?
No. It is the cable’s maximum stated capacity. The full chain negotiates the actual link, and any lower-capability device or adapter can reduce it.
Is this cable directional?
No. It is a passive copper cable, so either full-size HDMI plug can be connected to the source or display.
Can it give a console 4K at 240Hz?
No 4K240 capability is claimed for this exact cable. A cable also cannot make a console or game output a refresh rate it does not support.
Does it support HDR or Dolby Vision?
It can carry the verified formats listed for this model, including Dynamic HDR, Dolby Vision, HDR10+.
Can I use eARC with a soundbar?
Yes, when the television and soundbar or receiver both have compatible eARC ports.
Will it work with older HDMI equipment?
Yes, at the highest mode mutually supported by all connected devices. An older port does not gain newer HDMI capabilities by changing only the cable.
Can it connect directly to USB-C or DisplayPort?
No. Both ends are full-size HDMI Type-A male. A separate compatible adapter or dock is required, and that device may limit resolution or refresh rate.
What should I check if the high-refresh mode is missing?
Use the correct source and display ports, enable enhanced HDMI input mode, update firmware, set the desired mode in the source and remove intermediate adapters or switches for testing.