Quality is good Plug n Play Works fine for Asus Rampage IV Black edition Motherboard as boot drive with WD 1 TB NVME Speed is 4700 Mbps Read N Write 3820 Mbps Fantastic Adapter Reviw it after 6 moth about durability
The UGREEN Headset to PC Splitter (20898) lets you plug a one-plug headset, like the earphones from your phone or a modern gaming headset, into a desktop or laptop that has separate headphone and microphone jacks. The headset goes into the 4-pole socket, and the two plugs go into your PC's green and pink jacks for sound and voice at the same time.
2 → 1PC jacks to headset socket
20cmshort, tidy cable
Gold-plated3.5mm plugs
No driverpassive, plug and play
UGREEN Headset to PC Splitter key features
One-plug headset on a PC Use phone earphones and gaming headsets on desktop sound cards.
Sound and mic together Headphone plug and mic plug go into the PC's two jacks.
Gold-plated plugs Steady contact and clean sound.
Oxygen-free copper Low-loss conductors for clear audio.
Short 20cm cable Neat at the back of a PC or beside a laptop.
Nylon braided Tougher cable with aluminium alloy shells.
Marked plugs Headphone and mic icons, so you plug in the right way.
Travel-friendly Small enough to keep in a laptop bag.
UGREEN Headset to PC Splitter highlights
Braided and metal-shelled
A nylon-braided cable, aluminium alloy shells and gold-plated plugs make this the toughest version of the splitter, built for daily plugging in and out.
Hi-fidelity sound
A clean, passive path carries stereo sound to your headset and your voice back to the PC without adding noise.
Works with the gear you own
Use phone earphones and single-plug gaming headsets on any desktop or laptop with separate headphone and microphone jacks.
Which port for what
Usage scenarios for the UGREEN Headset to PC Splitter
PC gaming
Use a one-plug gaming headset on a desktop with separate green and pink jacks.
You get
Result
Game sound
Yes
Voice chat mic
Yes
Driver needed
No
Use: Headphone plug into the green jack, mic plug into the pink jack.
Calls and online classes
Use your phone earphones for meetings on a PC.
You get
Result
Headset sound
Yes
Headset mic
Yes
Cable length
20cm
Use: Plug the earphones into the socket, then the two plugs into the PC.
UGREEN Headset to PC Splitter compatibility
Device
Status
What to expect
Desktop PCs with separate green and pink jacks
Compatible
Sound and mic
Laptops and sound cards with two 3.5mm jacks
Compatible
Sound and mic
CTIA headsets and phone earphones
Compatible
Most headsets from the last decade
OMTP headsets
Not supported
Mic won't work
Devices with one 4-pole combo jack
Not supported
Not needed; plug the headset in directly
Works with
PCs and laptops with separate headphone and mic jacks
CTIA one-plug headsets and earphones
Won't work with
OMTP headsets
Devices with a single combo jack
UGREEN 10790 3.5mm Headset to PC Splitter, Braided specifications
Model
UGREEN 10790
Socket
3.5mm 4-pole (CTIA) female
Plugs
3.5mm headphone male, 3.5mm microphone male
Length
About 20cm
Cable
Nylon braided
Shells
Aluminium alloy
Contacts
Gold-plated
Power / driver
None, passive
What's in the box
UGREEN 20cm braided headset to PC splitter (10790)
Headset not included.
Good to know
CTIA headsets only. The socket follows the CTIA standard used by most headsets today. Older OMTP headsets will have no mic or muffled sound.
Make sure the headphone plug goes into the green (headphone) jack and the mic plug into the pink (microphone) jack on your PC.
UGREEN Headset to PC Splitter FAQs
Will my phone earphones work on my PC with this?
Yes, if they have a single 4-pole CTIA plug, as most do. Sound and mic both work.
Which plug goes where?
The headphone plug goes into the PC's green jack and the mic plug into the pink jack.
Do I need a driver?
No. It's a passive cable.
Does it work with OMTP headsets?
No. It supports CTIA headsets only.
My laptop has just one combo jack. Do I need this?
No. Plug the headset straight into the combo jack.
Genuine UGREEN, imported and sold by Sophus Technosol Pvt Ltd, the authorised national distributor. GST invoice with every order. 2-year India warranty.
The UGREEN Headset to PC Splitter (20898) lets you plug a one-plug headset, like the earphones from your phone or a modern gaming headset, into a desktop or laptop that has separate headphone and microphone jacks. The headset goes into the 4-pole socket, and the two plugs go into your PC's green and pink jacks for sound and voice at the same time.
2 → 1PC jacks to headset socket
20cmshort, tidy cable
Gold-plated3.5mm plugs
No driverpassive, plug and play
UGREEN Headset to PC Splitter key features
One-plug headset on a PC Use phone earphones and gaming headsets on desktop sound cards.
Sound and mic together Headphone plug and mic plug go into the PC's two jacks.
Gold-plated plugs Steady contact and clean sound.
Oxygen-free copper Low-loss conductors for clear audio.
Short 20cm cable Neat at the back of a PC or beside a laptop.
Nylon braided Tougher cable with aluminium alloy shells.
Marked plugs Headphone and mic icons, so you plug in the right way.
Travel-friendly Small enough to keep in a laptop bag.
UGREEN Headset to PC Splitter highlights
Braided and metal-shelled
A nylon-braided cable, aluminium alloy shells and gold-plated plugs make this the toughest version of the splitter, built for daily plugging in and out.
Hi-fidelity sound
A clean, passive path carries stereo sound to your headset and your voice back to the PC without adding noise.
Works with the gear you own
Use phone earphones and single-plug gaming headsets on any desktop or laptop with separate headphone and microphone jacks.
Which port for what
Usage scenarios for the UGREEN Headset to PC Splitter
PC gaming
Use a one-plug gaming headset on a desktop with separate green and pink jacks.
You get
Result
Game sound
Yes
Voice chat mic
Yes
Driver needed
No
Use: Headphone plug into the green jack, mic plug into the pink jack.
Calls and online classes
Use your phone earphones for meetings on a PC.
You get
Result
Headset sound
Yes
Headset mic
Yes
Cable length
20cm
Use: Plug the earphones into the socket, then the two plugs into the PC.
UGREEN Headset to PC Splitter compatibility
Device
Status
What to expect
Desktop PCs with separate green and pink jacks
Compatible
Sound and mic
Laptops and sound cards with two 3.5mm jacks
Compatible
Sound and mic
CTIA headsets and phone earphones
Compatible
Most headsets from the last decade
OMTP headsets
Not supported
Mic won't work
Devices with one 4-pole combo jack
Not supported
Not needed; plug the headset in directly
Works with
PCs and laptops with separate headphone and mic jacks
CTIA one-plug headsets and earphones
Won't work with
OMTP headsets
Devices with a single combo jack
UGREEN 10790 3.5mm Headset to PC Splitter, Braided specifications
Model
UGREEN 10790
Socket
3.5mm 4-pole (CTIA) female
Plugs
3.5mm headphone male, 3.5mm microphone male
Length
About 20cm
Cable
Nylon braided
Shells
Aluminium alloy
Contacts
Gold-plated
Power / driver
None, passive
What's in the box
UGREEN 20cm braided headset to PC splitter (10790)
Headset not included.
Good to know
CTIA headsets only. The socket follows the CTIA standard used by most headsets today. Older OMTP headsets will have no mic or muffled sound.
Make sure the headphone plug goes into the green (headphone) jack and the mic plug into the pink (microphone) jack on your PC.
UGREEN Headset to PC Splitter FAQs
Will my phone earphones work on my PC with this?
Yes, if they have a single 4-pole CTIA plug, as most do. Sound and mic both work.
Which plug goes where?
The headphone plug goes into the PC's green jack and the mic plug into the pink jack.
Do I need a driver?
No. It's a passive cable.
Does it work with OMTP headsets?
No. It supports CTIA headsets only.
My laptop has just one combo jack. Do I need this?
No. Plug the headset straight into the combo jack.
Genuine UGREEN, imported and sold by Sophus Technosol Pvt Ltd, the authorised national distributor. GST invoice with every order. 2-year India warranty.
What it does. a passive 20cm headset-to-PC adapter that separates one CTIA TRRS headset connection into dedicated 3.5mm headphone and microphone plugs for a computer with two audio sockets.
Signal path. Connect the headset’s four-pole CTIA plug to the single TRRS female socket. Connect the headphone-marked male plug to the computer’s audio output and the microphone-marked male plug to its microphone input. The adapter is not designed for reverse use.
Conversion boundary. There is no DAC, amplifier or format conversion. The cable passively routes analogue stereo playback and mono headset-microphone contacts. Sound quality and microphone level remain dependent on the headset and computer sound hardware.
Power design. No battery, charger or USB power. It carries low-level analogue headset signals only.
Signal direction and connector roles
Connect the headset’s four-pole CTIA plug to the single TRRS female socket. Connect the headphone-marked male plug to the computer’s audio output and the microphone-marked male plug to its microphone input. The adapter is not designed for reverse use.
Connector rule: an output must feed the matching input. Physical fit does not prove electrical role, microphone wiring, charging protocol or signal level.
Safe start: lower volume or gain, check labels and connect one complete path before adding any charger, second endpoint or application.
Conversion, sample rates and sound behaviour
Microphone, calls and controls
Microphone / call path. The microphone path requires a CTIA-standard TRRS headset and a working computer microphone input. OMTP wiring, proprietary inline controls and non-headset microphone power requirements may not work.
Controls. No controls. Headset buttons may not be interpreted by a two-socket PC because the adapter separates audio and microphone contacts but does not emulate phone remote electronics.
Use scenarios
Scenario 1. Using a mobile-style CTIA headset on a desktop PC.
Scenario 2. Voice calls on a computer with separate sound sockets.
Scenario 3. Gaming voice chat where the PC exposes separate audio and mic ports.
Scenario 4. Online classes with one four-pole wired headset.
Scenario 5. Replacing colour-coded breakout capability on an older laptop.
Setup and usability guidance
Usability tip: test playback and microphone or charging separately before relying on simultaneous operation.
Step 1: Turn computer and app volume down.
Step 2: Insert the headset TRRS plug fully into the adapter’s single female socket first.
Step 3: Connect the headphone-marked male plug to audio out.
Step 4: Connect the microphone-marked male plug to microphone in.
Step 5: Select the computer playback and recording devices, then test sound and microphone separately.
Compatible devices and systems
CTIA four-pole headsets/earphones at the female end and PCs or laptops with separate 3.5mm headphone-out and microphone-in sockets at the two male ends.
Match the connector role and wiring standard.
Check host operating-system audio settings and app permissions.
For USB audio, confirm the port supports data/audio rather than charging only.
For analogue audio, confirm input versus output and headset TRRS versus stereo TRS.
For XLR, confirm signal level, balanced wiring and phantom-power requirements.
What this product does
a passive 20cm headset-to-PC adapter that separates one CTIA TRRS headset connection into dedicated 3.5mm headphone and microphone plugs for a computer with two audio sockets.
Connect the headset’s four-pole CTIA plug to the single TRRS female socket. Connect the headphone-marked male plug to the computer’s audio output and the microphone-marked male plug to its microphone input. The adapter is not designed for reverse use.
There is no DAC, amplifier or format conversion. The cable passively routes analogue stereo playback and mono headset-microphone contacts. Sound quality and microphone level remain dependent on the headset and computer sound hardware.
The microphone path requires a CTIA-standard TRRS headset and a working computer microphone input. OMTP wiring, proprietary inline controls and non-headset microphone power requirements may not work.
No battery, charger or USB power. It carries low-level analogue headset signals only.
What this product does not do
not a two-headphone sharing splitter, not reversible, not for a single combo-jack computer, not USB, not a DAC, not an amplifier and not guaranteed for OMTP or proprietary headset remotes.
Do not force a connector, bend it under side load or continue using damaged pins, plugs, insulation or housings.
Do not infer microphone, charging, data, phantom-power or console-chat support merely from a connector fitting.
Do not connect wet equipment or leave cables where they create a trip, snag or vehicle-control hazard.
Do not use consumer/headset audio connectors with mains, speaker-level or unknown industrial signals.
What to do
Confirm SKU. Check 10790 on the product or package before relying on these specifications.
Start at low level. Lower headphone volume, speaker level, microphone gain or channel fader before connection.
Test one path. Verify one source, adapter/cable and destination before adding more equipment.
Keep ports clean and dry. Disconnect power, remove lint without metal tools and allow complete drying before reuse.
Use system settings. Select the intended playback and recording devices; physical connection alone may not change routing.
Store without stress. Coil cables loosely and protect exposed plugs, pins and adapter housings.
What not to do
Do not force a fit. Stop if alignment, case clearance, pins or latch do not match.
Do not guess direction. Inputs and outputs can share the same connector shape.
Do not overstate formats. Use only the sample-rate or signal claim listed for this SKU.
Do not use at unsafe volume. High playback levels can injure hearing and overload equipment.
Do not patch live phantom power. For XLR, mute and disable phantom power before changing connections.
Do not create hazards. Keep leads away from pedals, controls, doors, wheels, children and walkways.
Power, charging and operating conditions
Power behaviour: No battery, charger or USB power. It carries low-level analogue headset signals only.
Use only compliant, undamaged hosts, chargers and cables.
Disconnect for unusual heat, smell, intermittent power, corrosion or visible damage.
Do not cover adapters during charging or operation.
Keep all contacts dry and free of conductive debris.
No product in this batch should be treated as weather-resistant unless an IP rating is published.
Warnings and limitations
Hearing: begin at low volume, limit exposure and stop if you notice discomfort or ringing.
Electrical: never connect audio pins to mains, unknown industrial wiring or incompatible high-power outputs.
Microphones: mute channels before plugging; for XLR, switch phantom power only when the connected microphone requires it.
Driving: connect and configure vehicle audio while parked; do not route cables across pedals, steering or airbags.
Water and heat: keep connectors dry and away from hot dashboards, heaters and direct sun.
Mechanical: do not pull by the cable, close doors on leads or leave adapters protruding where they can be struck.
Troubleshooting
No playback. Check source output selection, destination input, mute state, volume and full connector seating.
No microphone. Confirm an mic-return path, correct TRRS/XLR wiring, recording-device selection and app permission.
Charging absent or slow. Confirm that this SKU supports charging, then test a compatible charger/cable and inspect host limits.
Noise or hum. Separate signal leads from power bricks, test another port/path and verify balanced grounding or AUX input role.
One channel missing. Reinsert the plug fully, inspect contacts and test each device with a known-good cable or headset.
USB device not recognised. Try a direct data-capable USB port, reboot audio services and check operating-system support.
Specifications
At a glance.
Product
CTIA headset-to-PC audio/microphone splitter
SKU
10790
Length
Approximately 20cm
Headset side
3.5mm CTIA TRRS female
Computer side
Separate 3.5mm male headphone and microphone plugs
Signal type
Passive analogue stereo output plus headset microphone input
Conversion / amplification
None
Housing
Aluminium-alloy shells
Contacts
Gold-plated
Cable
Nylon braided
Power
None
In the box
Confirm this SKU and connector gender. Confirm input/output direction and TRS/TRRS/XLR wiring. Confirm microphone, inline-control, charging or phantom-power needs separately. Check operating-system and console limitations. Confirm that every extra cable, charger, headset or adapter you need is actually included.
Format figures are device ceilings or stated maxima under suitable conditions; compatible equipment may negotiate or operate at lower values.
Included: one UGREEN 10790 20cm headset-to-PC splitter; headset, sound card and USB adapter are not included.
FAQs
Questions buyers ask.
What exactly is UGREEN 10790?
It is a passive 20cm headset-to-PC adapter that separates one CTIA TRRS headset connection into dedicated 3.5mm headphone and microphone plugs for a computer with two audio sockets.
How should the three 3.5mm connectors be used?
Connect the headset’s four-pole CTIA plug to the single TRRS female socket. Connect the headphone-marked male plug to the computer’s audio output and the microphone-marked male plug to its microphone input. The adapter is not designed for reverse use.
Does it work in reverse?
No. not a two-headphone sharing splitter, not reversible, not for a single combo-jack computer, not USB, not a DAC, not an amplifier and not guaranteed for OMTP or proprietary headset remotes.
Which headset wiring is required?
The microphone path requires a CTIA-standard TRRS headset and a working computer microphone input. OMTP wiring, proprietary inline controls and non-headset microphone power requirements may not work.
Can it share audio with two headphones?
No. It separates one headset into dedicated computer headphone and microphone plugs.
Does it contain a DAC or amplifier?
There is no DAC, amplifier or format conversion. The cable passively routes analogue stereo playback and mono headset-microphone contacts. Sound quality and microphone level remain dependent on the headset and computer sound hardware.
Which devices are the right match?
CTIA four-pole headsets/earphones at the female end and PCs or laptops with separate 3.5mm headphone-out and microphone-in sockets at the two male ends.
What is the safest first setup?
Turn computer and app volume down. Insert the headset TRRS plug fully into the adapter’s single female socket first. Connect the headphone-marked male plug to audio out.
What should I check if there is no sound or signal?
Confirm connector role and seating, system input/output selection, volume/gain, app permissions and one known-good source/destination before changing multiple variables.
What is included in the package?
one UGREEN 10790 20cm headset-to-PC splitter; headset, sound card and USB adapter are not included.
What should this product not be used for?
not a two-headphone sharing splitter, not reversible, not for a single combo-jack computer, not USB, not a DAC, not an amplifier and not guaranteed for OMTP or proprietary headset remotes.