Quality is good Plug n Play Works fine for Asus Rampage IV Black edition Motherboard as boot drive with WD 1 TB NVME Speed is 4700 Mbps Read N Write 3820 Mbps Fantastic Adapter Reviw it after 6 moth about durability
The UGREEN HDMI 2.1 Cable (45436) connects a PS5, Xbox Series X, gaming PC, Apple TV or 4K/8K TV with 8K60/4K120 video and 48Gbps bandwidth. It supports 4K at high refresh rates for smooth gaming, HDR, and eARC for lossless sound to your soundbar or AV receiver.
8K60video
4K120high refresh
eARClossless audio
10mcable length
UGREEN HDMI 2.1 Cable key features
8K60/4K120 video Sharp, smooth picture for TVs and monitors.
Turn on high-refresh mode. For 4K120 or 8K, use an HDMI 2.1 port on the TV and turn on its enhanced HDMI / input signal plus setting.
PS5 and Xbox Series X need 120Hz turned on in their video settings.
UGREEN HDMI 2.1 Cable FAQs
Does it support 4K 120Hz for PS5?
Yes, with a TV that has an HDMI 2.1 port and 120Hz turned on.
Does it support eARC?
Yes, for lossless audio to a soundbar or receiver.
Will it work with my laptop?
Yes, if the laptop has an HDMI port. For USB-C laptops, use a USB-C to HDMI cable.
Is 10m too long?
No; it's built for long runs, but keep the source's output at the supported resolution.
Does it need power?
No.
Genuine UGREEN, imported and sold by Sophus Technosol Pvt Ltd, the authorised national distributor. GST invoice with every order. 2-year India warranty.
The UGREEN HDMI 2.1 Cable (45436) connects a PS5, Xbox Series X, gaming PC, Apple TV or 4K/8K TV with 8K60/4K120 video and 48Gbps bandwidth. It supports 4K at high refresh rates for smooth gaming, HDR, and eARC for lossless sound to your soundbar or AV receiver.
8K60video
4K120high refresh
eARClossless audio
10mcable length
UGREEN HDMI 2.1 Cable key features
8K60/4K120 video Sharp, smooth picture for TVs and monitors.
Turn on high-refresh mode. For 4K120 or 8K, use an HDMI 2.1 port on the TV and turn on its enhanced HDMI / input signal plus setting.
PS5 and Xbox Series X need 120Hz turned on in their video settings.
UGREEN HDMI 2.1 Cable FAQs
Does it support 4K 120Hz for PS5?
Yes, with a TV that has an HDMI 2.1 port and 120Hz turned on.
Does it support eARC?
Yes, for lossless audio to a soundbar or receiver.
Will it work with my laptop?
Yes, if the laptop has an HDMI port. For USB-C laptops, use a USB-C to HDMI cable.
Is 10m too long?
No; it's built for long runs, but keep the source's output at the supported resolution.
Does it need power?
No.
Genuine UGREEN, imported and sold by Sophus Technosol Pvt Ltd, the authorised national distributor. GST invoice with every order. 2-year India warranty.
Maximum capability is not a guarantee for every setup. This is a 10m passive run, so confirm the ports, signal format and intermediate equipment rather than assuming every 48Gbps mode will work in every setup.
Rated: Up to 8K at 60Hz or 4K at 120Hz.
Published capacity: Up to 48Gbps.
The source, display and selected ports must all support the requested mode.
Receivers, switches, splitters, capture devices, docks, adapters, wall plates and extra cables may lower the result.
Audio and feature support
What the cable can carry
HDR signalling. The cable can transport the listed signal only when the source, content and receiving equipment support it.
eARC. This is a pass-through capability; it must be available and enabled across the complete HDMI chain.
Dolby-compatible audio pass-through. This is a pass-through capability; it must be available and enabled across the complete HDMI chain.
3D. This is a pass-through capability; it must be available and enabled across the complete HDMI chain.
backward operation with earlier HDMI equipment. This is a pass-through capability; it must be available and enabled across the complete HDMI chain.
A cable does not decode Dolby or DTS audio, create HDR, generate extra frames or add ARC/eARC to an ordinary HDMI port. Those functions come from compatible devices, content and settings.
Construction and routing
Model guidance
Passive cable build. HD175 long-run passive copper cable with a flexible black PVC body, pure-copper core information on the official page and reinforced full-size HDMI connectors.
Non-directional; either plug may face the source
Plan gentle bends and protect the connector housings from pulling force.
Do not infer an in-wall, plenum, LSZH or fire rating unless it is printed on the supplied cable.
Test the intended mode before any route becomes difficult to access.
Use scenarios
Practical examples
Home entertainment. AV rack to a television or projector across a room
Work and presentation. Console or PC to a distant compatible display
Gaming and media. Presentation computer to a meeting-room screen
Audio or convenient routing. TV eARC connection to a remotely placed receiver or soundbar
Setup and usability guidance
Connect • configure • verify
After setup, open the television or monitor signal-information page. It is the quickest way to confirm the actual resolution, refresh rate and HDR state received by the display.
Step 1: Measure the routed path and avoid unnecessary excess cable.
Step 2: Connect either end to source or display because the cable is non-directional.
Step 3: Start with a direct source-to-display test at the intended mode.
Step 4: Enable the correct enhanced HDMI input and verify the display reports the expected resolution, refresh rate and HDR.
Step 5: Add receivers, switches or wall plates only after the direct link is stable.
Compatible devices and systems
Model guidance
Match the connector and the port capability.
Operating systems normally need no cable driver. A computer may still require the correct graphics driver and display settings, while a USB-C-only device needs a separate video-capable adapter or dock.
Consoles, PCs, media players and AV receivers with full-size HDMI output
TVs, projectors and monitors with full-size HDMI input
Compatible eARC television and audio equipment
Earlier HDMI equipment at its highest mutually supported mode
Check before buying
Avoid the common mismatch
The required physical route really suits 10m, with enough slack but no tight coil or tension.
Both connector ends match the intended ports: Full-size HDMI Type-A male to full-size HDMI Type-A male.
The requested mode stays within the rated specification: Up to 8K at 60Hz or 4K at 120Hz.
This is a 10m passive run, so confirm the ports, signal format and intermediate equipment rather than assuming every 48Gbps mode will work in every setup.
Every adapter, receiver, switch, splitter, wall plate or extra cable in the path supports the same video, HDCP and audio requirements.
A concealed route does not require a safety rating that has not been for this cable.
What this product does
Scope and limitations
Provides a 10m physical HDMI connection using full-size hdmi type-a male to full-size hdmi type-a male.
Carries compatible digital video and audio within the 8K60 / 4K120 guidance.
Passes supported functions such as HDR signalling, eARC, Dolby-compatible audio pass-through, 3D when the complete system supports them.
Works as a passive cable without a separate power supply.
It does not upscale content, create HDR, decode audio, generate frames or improve the native quality of a display.
It does not add a resolution, refresh rate, ARC/eARC feature or HDCP version to a port that lacks it.
It does not convert USB-C, DisplayPort, Mini/Micro HDMI, DVI or VGA.
It is not an active repeater, fibre extender or ordinary Ethernet/LAN cable.
What to do
Care and installation practice
Check this SKU and length on the order and received package before installation.
Hold the connector housing—not the cable body—when plugging or unplugging.
Test the intended video and audio mode with a direct connection before adding other devices.
Leave a relaxed curve and support the cable so the HDMI socket carries no weight.
Do not force a misaligned HDMI plug or pull a connector out by the cable.
Do not sharply kink, knot, crush, staple, pinch under furniture or expose the cable to heat or moisture.
Do not assume the cable upgrades the HDMI capability of a source, display, adapter or receiver.
Do not conceal the cable in a wall or ceiling without verifying its printed rating and local installation rules.
Warnings and limitations
Read before use
Ceiling. The official page describes this 10m model as passive and non-directional; it is not a fibre AOC.
Installation caution. Long passive routes are sensitive to the complete signal format and every connection in the chain.
Not a converter. No certification, in-wall, plenum or fire rating is claimed.
Route and rating. Do not coil tightly, crush, staple or leave either HDMI port carrying the cable weight.
Specifications
At a glance.
Brand
UGREEN
SKU
45436
Product type
Passive HDMI cable
Cable length
10 metres
Connectors
Full-size HDMI Type-A male to full-size HDMI Type-A male
Direction
Non-directional; either plug may face the source
Video guidance
Up to 8K at 60Hz or 4K at 120Hz
Published bandwidth / rate
Up to 48Gbps
Construction
HD175 long-run passive copper cable with a flexible black PVC body, pure-copper core information on the official page and reinforced full-size HDMI connectors.
Devices, adapters, cable-management accessories and any other cables shown in use images are not included. Confirm SKU 45436 and 10m on the received item.
FAQs
Questions buyers ask.
What is the video target for SKU 45436?
Up to 8K at 60Hz or 4K at 120Hz. This is a 10m passive run, so confirm the ports, signal format and intermediate equipment rather than assuming every 48Gbps mode will work in every setup.
What connectors does it use?
Full-size HDMI Type-A male to full-size HDMI Type-A male. It does not fit Mini HDMI, Micro HDMI, USB-C, DisplayPort, DVI or VGA without a separate compatible adapter.
Does the cable create a higher resolution or refresh rate?
No. It carries a compatible HDMI signal; it cannot add a mode, upscale content or improve a display panel.
Which devices can I connect?
Use it with compatible full-size HDMI equipment such as Consoles, PCs, media players and AV receivers with full-size HDMI output; TVs, projectors and monitors with full-size HDMI input; Compatible eARC television and audio equipment.
What determines the actual picture mode?
The lowest-capability source, port, display, content format, setting and intermediate device controls the final mode.
Can I use it with a console?
Yes, when the console, game and display support the selected mode. The cable cannot make a console output an unsupported refresh rate.
Can I route it inside a wall or ceiling?
No concealed-installation rating is claimed here. Check the physical cable marking and local requirements before any in-wall or ceiling route.
What should I check if there is no picture?
Reseat both ends, select the correct input, try a direct connection, lower the mode and verify every device and setting in the chain.
How should I care for the cable?
Use gentle curves, avoid crushing or pulling, grip connector housings, and keep the cable dry and away from heat.
What is included?
One UGREEN 45436 10m HDMI male-to-male cable. Connected equipment and adapters are not included.