Namaste ! Vanakkam ! Namashkara ! Jai Jinendra ! India

Free Shipping for Normal Deliveries on orders above Rs. 999
Official Store • 2 Year Direct Warranty • GST invoice
Ugreen  |  SKU: 15158
51% off
New arrival

UGREEN HiTune T6 Hybrid ANC Earbuds, LDAC, 30H – 15158

Rs. 7,042.00 Rs. 14,441.00
Tax included Shipping calculated at checkout.

Silence Disrupted
Crystal Clear Calls
Seamless Connect
All-Day Power
Weatherproof Durability
HITUNE T6 • HYBRID ANC • LDAC • 30H

UGREEN HiTune T6 Hybrid ANC Earbuds, LDAC, 30H – 15158

Overview

UGREEN 15158 is in-ear Bluetooth 5.3 true-wireless earbuds with hybrid ANC, 10mm drivers, six microphones, LDAC/SBC/AAC support and a USB-C charging case. This guide explains direction, pairing, codec limits, microphone behaviour, battery expectations and safe use without borrowing claims from similar UGREEN products.

SKU 15158HiTune T6WhiteTrue wireless audio
UGREEN 15158 HiTune T6 earbuds and charging case — the only exact live image for SKU 15158
HiTune T6 earbuds and charging case — the only exact live image for SKU 15158

Key features

Exact product role

in-ear Bluetooth 5.3 true-wireless earbuds with hybrid ANC, 10mm drivers, six microphones, LDAC/SBC/AAC support and a USB-C charging case.

Audio direction

A compatible host transmits Bluetooth audio to the earbuds. Six microphones support call processing back to the host. The charging case supplies stored battery power and is not an audio transmitter.

Codec boundary

SBC, AAC and LDAC are listed. LDAC works only with a compatible source and settings; codec availability can change when call mode or other features are active. aptX and LC3 are not claimed.

Compatibility boundary

Compatible Bluetooth-audio phones, tablets and computers. LDAC requires a source that implements it; Apple devices normally negotiate another supported codec. TV/console mic support varies.

Audio direction: source → product → listener

A compatible host transmits Bluetooth audio to the earbuds. Six microphones support call processing back to the host. The charging case supplies stored battery power and is not an audio transmitter.

Why direction matters: transmitter, receiver and headset roles are not interchangeable. A Bluetooth version number also does not establish microphone return, codec, multipoint or low latency.

Before pairing: identify the wired input/output, set the correct operating mode and lower volume at every powered endpoint.

Sound, codecs and latency

Codec support

SBC, AAC and LDAC are listed. LDAC works only with a compatible source and settings; codec availability can change when call mode or other features are active. aptX and LC3 are not claimed.

Delay and sync

Approximately 130ms is the listed low-latency-mode laboratory figure. Actual end-to-end delay can be higher and LDAC does not by itself mean lower latency.

Real-world sound

Final fidelity depends on the source file, negotiated codec, RF conditions, transducers, fit, amplifier and volume. “Bluetooth 5.x” alone is not a sound-quality tier.

For games and video

Treat every millisecond figure as a controlled test result. Wireless display processing, game engines and headset buffering can add delay.

Use scenarios

Scenario 1

LDAC music from a compatible source where connection quality permits.

Scenario 2

ANC listening during commutes or steady indoor noise.

Scenario 3

Calls using the six-microphone array.

Scenario 4

Video and casual gaming with low-latency mode.

Scenario 5

Exercise with protection from sweat followed by complete drying.

Setup and usability guidance

  1. Step 1: Charge the case and both earbuds.
  2. Step 2: Open the case and select the exact HiTune T6 entry on the host.
  3. Step 3: On a compatible Android source, enable LDAC only if desired and confirm the active codec in system settings.
  4. Step 4: Check normal/ANC and low-latency modes separately.
  5. Step 5: If moving to another host, disconnect the first host to prevent automatic reconnection.

Best practice: pair one endpoint first, verify stable audio, then add any supported second endpoint. This makes faults easier to isolate.

Controls

Touch controls handle supported playback, calls and listening-mode changes. Follow the T6 manual because gestures from T3, T3 Pro or T6s are not interchangeable.

Microphone and calls

Six microphones with noise-analysis processing improve supported call pickup. This does not make calls immune to wind, poor cellular service or distant speech.

Two-device behaviour

Multipoint is not verified. One-step pairing/reconnection does not establish simultaneous audio from two hosts.

Reset path

Remove the saved HiTune T6 record, place both earbuds in the charged case and follow the exact T6 reset sequence in the supplied manual before pairing again.

Compatible devices and systems

Verified compatibility class: Compatible Bluetooth-audio phones, tablets and computers. LDAC requires a source that implements it; Apple devices normally negotiate another supported codec. TV/console mic support varies.

  • Match Bluetooth audio capability, not just the word Bluetooth. Some TVs, consoles and computers support controllers or data but not Bluetooth audio.
  • Confirm whether the desired direction is sending audio, receiving audio or returning a microphone. These are separate capabilities.
  • Confirm physical connector role and audio type: analogue AUX, optical PCM or USB audio are not interchangeable.
  • Update the host operating system and test with other saved Bluetooth devices temporarily disconnected.
  • When using branded earbuds/headphones, check their pairing limits and supported codec list too.

What this product does

  • Receives Bluetooth programme audio from a compatible host.
  • Uses built-in microphones for supported call audio.
  • Stores and recharges in its matched case.
  • Provides only the listening modes and codecs stated for this exact SKU.
  • Reconnects after a successful pairing when the saved host is available.

What this product does not do

  • not guaranteed multipoint; not aptX; 48dB and 130ms are qualified test figures; IPX5 does not permit immersion; no claim that ANC removes voices or sudden warning sounds.
  • Does not guarantee uninterrupted wireless service through walls, crowds, RF congestion or defective device ports.
  • Does not improve a poor recording, repair a damaged socket or guarantee a particular listening volume.
  • Does not mix two independent programmes or create independent listener volume unless expressly documented.
  • Does not prove compatibility merely because a connector fits or a device advertises Bluetooth.

What to do

Start with one device

Pair and test one endpoint before adding a supported second device or extra cable path.

Keep volume low

Begin at low source and destination volume, especially after switching RX/TX, ANC modes or audio outputs.

Keep firmware and OS current

Updates can improve Bluetooth stability, but use only official vendor updates and do not assume they add unlisted hardware features.

Protect ports and batteries

Grip connectors by housings, keep charging contacts dry and store the product away from loose metal objects.

Confirm active codec or mode

Use the host menu or product display when available. Marketing names do not prove what was negotiated.

Dry before charging

After sweat or a splash, wipe and air-dry completely before returning earbuds to a case or connecting USB power.

What not to do

Do not assume version = feature

Bluetooth 5.x does not automatically mean aptX, LDAC, ANC, multipoint or microphone return.

Do not force connectors

Stop if a plug does not align or fully seat; check direction, port type, case clearance and debris.

Do not charge wet hardware

Moisture plus charging contacts can cause corrosion, heat or failure.

Do not use ANC as protection

Noise cancellation does not certify safe exposure in factories, workshops, shooting, aviation or other hazardous noise.

Do not pair while driving

Configure calls, volume and source switching only while safely parked.

Do not invent reset gestures

Use the exact model manual; similar HiTune and Bluetooth adapters use different button timing.

Battery, charging and realistic runtime

Runtime: Up to 7 hours from the earbuds with ANC off and up to 30 hours total with the case. ANC, LDAC, calls, high volume and temperature reduce runtime.

Power method: USB-C charging case. IPX5 applies to the earbuds for sweat and light splashes, not immersion or the charging case.

  • Published runtime is normally measured under controlled conditions; high volume, ANC, premium codecs, calls, displays, cold weather and weak signal can shorten it.
  • Lithium batteries age. Lower runtime after repeated cycles is normal; swelling, leakage, excessive heat or odour is not.
  • Use compliant cables and power sources, keep ventilation clear and disconnect if the product becomes unusually hot.
  • For long storage, avoid leaving the battery empty for months; recharge periodically according to the supplied manual.

Warnings and limitations

  • Hearing: start at low volume, take listening breaks and reduce level if you notice discomfort or ringing. ANC is not hearing protection.
  • Situational awareness: do not use isolating audio or ANC where hearing traffic, alarms, announcements or instructions is important.
  • Battery: do not crush, puncture, burn, short, disassemble or charge a wet/swollen/hot product. Stop use if odour, leakage or deformation appears.
  • Children and pets: keep earbuds, tips, adapters and cables away from small children; small components can be a choking hazard.
  • Aircraft: follow crew instructions, use only permitted seat audio sockets and keep wireless functions off whenever required.
  • Driving: pair and adjust while parked. Hands-free capability does not remove attention or legal obligations.
  • Water: a stated IP rating is limited laboratory splash resistance, not permission to swim, shower or charge while wet. The case is not covered unless explicitly stated.

Troubleshooting and reset

No pairing

Move endpoints close together, charge/power both, disconnect competing saved devices, verify TX/RX direction and restart pairing.

Audio but no microphone

Confirm the app selected the earbuds as input and that microphone permission is enabled; reconnect after another call app releases the headset.

Drop-outs

Reduce distance, remove body/metal obstruction, move away from crowded 2.4GHz sources and test one paired device at a time.

Delay

Use a verified low-latency mode only where listed, confirm both endpoints support the needed codec and compare with a wired path.

Only one side/listener

Charge both earbuds, clean dry charging contacts, forget the saved record and perform the exact model reset.

Model-specific reset

Remove the saved HiTune T6 record, place both earbuds in the charged case and follow the exact T6 reset sequence in the supplied manual before pairing again.

Technical specifications

Product UGREEN HiTune T6 hybrid-ANC true-wireless earbuds
SKU / colour 15158 / white
Bluetooth version 5.3
Codecs SBC, AAC and LDAC
ANC Hybrid ANC, up to 48dB under UGREEN test conditions
Driver 10mm dynamic driver
Microphones Six for supported call processing
Listed low-latency mode Approximately 130ms
Earbud runtime Up to 7h with ANC off
Total runtime Up to 30h with case
Charging interface USB-C case
Water resistance IPX5 earbuds; do not submerge
Multipoint Not verified

Numbers are exact-SKU listing or exact-media figures unless marked unverified. They are qualified laboratory maxima, not universal guarantees.

Package contents

Package: HiTune T6 left/right earbuds and charging case are visually verified. Confirm the sealed retail-box list for charging cable, spare tips and documentation because the live exact-SKU gallery contains only one product image..

Pre-purchase checklist

  • Confirm SKU on the product/box rather than buying by family name alone.
  • Confirm transmitter versus receiver direction and every wired connector.
  • Confirm microphone/call need, desired codec and simultaneous-device need separately.
  • Check whether the exact source device supports Bluetooth audio, not only Bluetooth peripherals.
  • Inspect the sealed package on arrival and retain the manual for the correct reset and control map.

Product-specific FAQ

What exactly is UGREEN 15158?

It is in-ear Bluetooth 5.3 true-wireless earbuds with hybrid ANC, 10mm drivers, six microphones, LDAC/SBC/AAC support and a USB-C charging case.

Can these earbuds receive music and return microphone audio for calls?

A compatible host transmits Bluetooth audio to the earbuds. Six microphones support call processing back to the host. The charging case supplies stored battery power and is not an audio transmitter.

Which codecs are supported?

SBC, AAC and LDAC are listed. LDAC works only with a compatible source and settings; codec availability can change when call mode or other features are active. aptX and LC3 are not claimed.

Is there a guaranteed low-latency mode?

Approximately 130ms is the listed low-latency-mode laboratory figure. Actual end-to-end delay can be higher and LDAC does not by itself mean lower latency.

Do calls and the microphone work?

Six microphones with noise-analysis processing improve supported call pickup. This does not make calls immune to wind, poor cellular service or distant speech.

Do these exact earbuds support Bluetooth multipoint?

Multipoint is not verified. One-step pairing/reconnection does not establish simultaneous audio from two hosts.

What battery life should I expect?

Up to 7 hours from the earbuds with ANC off and up to 30 hours total with the case. ANC, LDAC, calls, high volume and temperature reduce runtime.

How is it charged or powered?

USB-C charging case. IPX5 applies to the earbuds for sweat and light splashes, not immersion or the charging case.

Which devices are compatible?

Compatible Bluetooth-audio phones, tablets and computers. LDAC requires a source that implements it; Apple devices normally negotiate another supported codec. TV/console mic support varies.

What should I do if pairing fails?

Remove the saved HiTune T6 record, place both earbuds in the charged case and follow the exact T6 reset sequence in the supplied manual before pairing again.

What is included?

HiTune T6 left/right earbuds and charging case are visually verified. Confirm the sealed retail-box list for charging cable, spare tips and documentation because the live exact-SKU gallery contains only one product image.

Exact-SKU research and media reconciliation

Research method: exact live Shopify record and images were checked against available UGREEN-owned regional product pages. Similar-family features were excluded whenever model, SKU, revision or artwork conflicted.

Media decision: The exact gallery contains one neutral product image. It is rendered once only—never repeated through modulo indexing—and no T6s, EchoBuds or sibling artwork is imported.

Source records: UGREEN source 1

GST Invoice available, just mail back with details to order confirmation mail.

Buy direct from official UGREEN India

GST Invoice, Warranty, authenticity, faster support
Back to top