Warnings and limitations
Data first: an enclosure can expose a drive; it cannot guarantee the integrity of the data already on it. Keep independent backups before migration, repartitioning or firmware work.
Power: use the supplied 12V/2A adapter, place it where it can ventilate and do not substitute a different voltage/polarity unit.
Heat: warmth can be normal, especially with NVMe. Stop use for smoke, burning smell, deformation, liquid ingress, repeated drop-outs or abnormal mechanical HDD sounds.
Handling: protect bare drives from electrostatic discharge; hold an SSD by its edges, avoid touching gold contacts and never move a spinning 3.5-inch HDD roughly.
Removal: wait for all writes, eject in the OS, allow the activity indicator to settle, then disconnect. Auto-sleep is not a substitute for safe removal.
Package contents
1 × UGREEN 50422 enclosure, 1 × 1m USB 3.0 A-to-B cable, 1 × 12V/2A power adapter, 1 × user guide; drive is not included
No host computer, phone, tablet, console, TV, router, SSD/HDD, cloning software or data-recovery service is included unless explicitly named above.
Research reconciliation: Official source and exact live media confirm 3.5/2.5-inch SATA, 5Gbps, 16TB, 12V/2A power, 1m A-to-B cable, ASM1153E and 3-minute sleep. No “portable bus-powered” wording is used because a 3.5-inch drive requires the supplied external power path.
Exact live Shopify media reviewed for SKU 50422
Product-specific FAQ
What is UGREEN 50422 made to do?
Turns one 3.5-inch or 2.5-inch SATA HDD/SSD into powered USB-A external storage for desktop, archive and media-library use. It is an enclosure/bridge, not a drive; storage media is not included.
Which drives fit?
One 3.5-inch or 2.5-inch SATA I/II/III HDD/SSD, up to 26mm drive thickness. Not for IDE/PATA, M.2 SATA, M.2 NVMe or mSATA; not a multi-bay RAID, dock or offline cloning station.
Does it support both SATA and NVMe?
No NVMe or M.2 drive fits this enclosure. It is for the stated 2.5/3.5-inch SATA drive format only.
What is the real maximum speed?
USB 3.0 is the 5Gbps theoretical link ceiling, below SATA III’s 6Gbps bus ceiling. Mechanical HDDs are normally much slower than either ceiling; actual throughput depends on drive, workload, host and UASP. Link-rate labels are theoretical and should not be read as a guaranteed benchmark.
What capacity is supported?
Up to 16TB, stated by the exact source and exact live gallery. Capacity support does not guarantee that every TV, router, console or old operating system can address or format the same size.
Will a new drive appear immediately?
The enclosure can be detected while a blank drive still has no volume. Use the correct disk utility to initialise, partition and format a new drive. Double-check the disk identity because formatting destroys existing data.
Can it clone or migrate my system?
It provides external access to the installed drive but does not perform standalone cloning. Use reliable cloning/backup software, confirm the target has sufficient usable capacity, keep the original untouched until verification and handle encrypted/boot volumes according to the OS vendor’s guidance.
Can I use it with a console, TV or router?
Possibly: Windows, macOS, Linux and ChromeOS; exact media also illustrates TV, router, PlayStation and Xbox uses subject to their own storage rules. The host may require a specific file system, partition scheme, capacity, power budget or dedicated “extended storage” format. Those rules can erase the drive and are controlled by the host, not by the enclosure.
Why is the drive not detected?
Power down and reseat the drive, confirm its protocol/form factor, try the supplied cable directly on another suitable host port, and inspect Disk Management/Disk Utility rather than only the file browser. Do not format an unknown drive with valuable data.
Is warmth normal, and how should I disconnect?
A drive and enclosure can become warm in long transfers. Keep ventilation clear, do not cover the housing, and stop for abnormal smell/noise or repeated disconnects. Always eject the volume and wait for activity to stop before unplugging.
What is included?
1 × UGREEN 50422 enclosure, 1 × 1m USB 3.0 A-to-B cable, 1 × 12V/2A power adapter, 1 × user guide; drive is not included.
Exact-model check before ordering
Match SKU 50422, the supported drive protocol/form factor, capacity guidance, supplied cable and the host’s data capability. Similar-looking UGREEN enclosures can differ in SATA versus NVMe, USB-A versus USB-C, power requirements and speed ceilings.
SKU 50422One 3.5-inch or 2.5-inch SATA I/II/III HDD/SSD, up to 26mm drive thicknessUSB 3.0 up to 5Gbps
