UGREEN LP945 MagSafe-Compatible Magnetic Phone Ring Holder & Stand – Double-Sided, 360° (65819)

UGREEN LP945 • SKU 65819

Grip It, Stand It or Attach It to a Compatible Magnetic Surface

The UGREEN LP945 MagSafe-Compatible Magnetic Phone Ring Holder combines a finger grip, fold-out phone stand and double-sided magnetic attachment in a slim aluminium-alloy design.

Attach it directly to a MagSafe-enabled iPhone or compatible magnetic case. The rotating ring provides a more controlled hand position, converts into a kickstand for hands-free viewing and includes outward-facing magnets for compatible magnetic mounts and ferromagnetic steel surfaces.

Three Everyday Functions in One Compact Accessory

Approximately 5 mm Thin and 26 g

The ring holder measures approximately 57.8 mm across, has a listed folded thickness of approximately 5 mm and weighs approximately 26 g.

Its slim aluminium-alloy structure adds grip and stand functionality while remaining compact enough for everyday carrying. Any attached accessory will still add some thickness to the phone and may affect very tight pockets or fitted holders.

More Controlled One-Handed Phone Use

Rotate the ring around your preferred hand position and place a finger through it for additional control while browsing, scrolling, taking photos, recording videos or making video calls.

The ring holder can improve grip, but it is not a safety tether and cannot guarantee protection against drops. Always hold the phone securely.

What Does Double-Sided Magnetic Mean?

The phone-facing side attaches to a MagSafe-enabled phone, compatible magnetic case or supplied adapter ring. The outward-facing side can attach to a compatible magnetic car mount or suitable ferromagnetic steel surface.

This can provide temporary hands-free placement on suitable steel refrigerators, cabinets, racks or similar surfaces.

Not every metal is magnetic. Aluminium, copper and some grades of stainless steel may provide little or no attraction. Always test the surface and connection before releasing the phone.

Direct MagSafe Compatibility and an Adapter for Other Phones

Direct magnetic compatibility

• iPhone 17 series
• iPhone 16 series
• iPhone 15 series
• iPhone 14 series
• iPhone 13 series
• iPhone 12 series
• Compatible MagSafe cases with an integrated magnetic ring

Compatibility using the included adhesive adapter ring

• Compatible Samsung Galaxy phones
• Compatible Google Pixel phones
• OnePlus, Xiaomi, Redmi, Motorola, OPPO, vivo, realme and other smartphones
• Non-MagSafe iPhones and suitable non-magnetic cases

For best adhesion, attach the adapter ring to a clean, dry and flat case. It may not bond reliably to fabric, silicone, leather, oily, textured or heavily curved surfaces.

Remove the Ring Holder Before Wireless Charging

The UGREEN LP945 is a passive grip and stand. It does not contain a wireless-charging coil and does not pass charging power through the accessory.

Detach it from the phone before placing the device on a MagSafe, Qi2 or other wireless charger. Leaving the metal ring holder between the phone and charger can prevent correct alignment, interrupt charging or generate unnecessary heat.

360° Rotation and Fold-Out Stand Adjustment

Rotate the ring through 360° to place the finger opening or stand support around the required position. The folding hinge can then be opened and adjusted to support different viewing angles.

• Portrait stand: Useful for video calls, reading and vertical content.
• Landscape stand: Suitable for videos, online classes, recipes and wider content.
• Low-angle stand: Useful for desk notifications and casual viewing.
• Finger grip: Rotate the opening around the hand position that feels most comfortable.

Stand stability depends on phone size, case weight, ring position, viewing angle and the flatness of the supporting surface.

Product Specifications

How to Attach and Use It

For a MagSafe-enabled phone or case

1. Make sure the back of the phone or case and the ring holder are clean.
2. Align the ring holder centrally with the phone’s MagSafe ring.
3. Allow it to snap into position and check the connection before lifting the phone.
4. Rotate and unfold the ring to the required grip or stand position.

For another compatible phone or case

1. Select a clean, dry and flat case surface.
2. Centre the supplied adhesive metal ring around the wireless-charging coil position where applicable.
3. Remove the liner, place the ring carefully and press it evenly.
4. Allow the adhesive to settle according to the supplied instructions.
5. Attach the LP945 to the installed adapter ring and test the connection before normal use.

Important Usage Information

• The ring holder does not charge the phone.
• Remove it before using a wireless charger.
• The finger ring improves control but is not a drop-proof safety tether.
• Do not place bank cards, access cards or magnetic-stripe cards between the phone and holder.
• Not all metallic surfaces are magnetic; test the surface before releasing the phone.
• Do not suspend the phone above people, fragile objects, liquids or moving machinery.
• Do not rely on the outer magnet during high-impact or high-vibration activity.
• Thick cases and incorrectly positioned adapter rings can weaken attachment.
• The adhesive adapter ring may leave residue or marks when removed.
• Do not force the rotating ring or hinge beyond its normal movement range.

What’s in the Box?

• 1 × UGREEN LP945 Magnetic Phone Ring Holder and Stand
• 1 × Adhesive magnetic adapter ring
• 1 × User documentation

Phone, case, charger, magnetic car mount and metal surfaces shown in the images are for demonstration only.

Frequently Asked Questions

Genuine UGREEN Product for India

Genuine UGREEN product • GST invoice available • India-based customer support • Warranty support under the applicable UGREEN India policy