UGREEN LP678 Adjustable Aluminium Phone Stand for Desk – Foldable, Up to 7.9″ (15608)

UGREEN LP678 • SKU 15608

Put Your Phone at the Right Height and Viewing Angle

The UGREEN LP678 Adjustable Aluminium Phone Stand provides a stable, hands-free position for video calls, entertainment, reading, studying and everyday desk use. Its two 180° hinges let you adjust the phone’s height and angle, while the foldable 160g aluminium design is compact enough for storage or travel.

Please Check Before Ordering

Key Features

A Clean, Practical Stand for Phones up to 7.9 Inches

The LP678 is designed primarily for smartphones, including larger Plus, Pro Max and Ultra models that remain within the stated size and 350g weight limits. Silicone contact pads help cushion the device and reduce sliding where the phone touches the metal structure.

Place the phone vertically for calls, reading and notifications or horizontally for films, gaming and presentations.

Compact Desktop Footprint

The stand uses an approximately 110 × 70mm base, an approximately 105mm supporting arm and a 15mm-deep cradle. Its compact footprint occupies relatively little desk or bedside-table space while providing a raised position for a compatible phone.

• Base: approximately 11 × 7cm
• Main support section: approximately 10.5cm
• Cradle depth: approximately 1.5cm
• Product weight: approximately 160g
• Maximum supported load: approximately 350g

Two Independently Adjustable 180° Hinges

Adjust the lower hinge to change the support arm’s position and effective height. Adjust the upper hinge to tilt the phone-support plate towards or away from you. Together, the two joints provide a wide range of working positions.

The stand does not have a telescopic arm, motorised adjustment or swivel base. Its height and angle are changed manually by repositioning the hinges.

Hands-Free Viewing Around the Home

Position a compatible phone on a kitchen counter for recipes and cooking videos, on a desk for notifications and calls, or on a bedside table for alarms and media. Keeping the phone raised also makes it easier to see the screen without repeatedly picking it up.

Keep the stand away from water, steam, cooking oil, direct heat and unstable counter edges.

Use Your Phone While It Charges

An open section between the supporting hooks leaves access to the phone’s bottom charging port in portrait orientation. Connect your existing compatible cable without removing the phone from the stand.

Charging-cable compatibility depends on the size and shape of the connector, the phone case and the location of the device’s charging port.

Triangular Structure for Improved Stability

When opened, the base, central support arm and phone plate create a triangular arrangement. This helps distribute the supported device’s weight towards the base.

Stability still depends on the phone’s weight, case, orientation, hinge position, desk surface and the amount of touchscreen pressure applied. No freestanding stand can guarantee zero movement in every configuration.

Useful for Calls, Work and Everyday Content

Set the phone beside a laptop or monitor for video calls, messages, authentication prompts, calendars and reference material. The stand can also help position the camera more consistently during online meetings and live streaming.

Folds Down for Storage and Travel

Fold both hinge sections inward when the stand is not needed. At approximately 160g, it can be carried between home, office, college and travel workspaces without taking up the space of a fixed desktop mount.

Place the folded stand in a suitable pouch or protected section of the bag to prevent the metal edges from contacting other devices.

Device Compatibility

The LP678 supports compatible phones and selected small devices up to approximately 7.9 inches and 350g. The device must sit fully inside the 15mm cradle.

Case warning: Rugged cases, expanded ring holders, wallets, rear grips and raised accessories can interfere with the cradle or change the device’s balance.

How to Use the Stand

1. Place the folded stand on a flat, clean and dry surface.
2. Hold the base and raise the central support arm.
3. Adjust the upper plate to the required viewing angle.
4. Place the phone centrally between the two supporting hooks.
5. Check that the phone rests fully on the silicone-covered contact points.
6. Release the phone slowly and confirm that the stand remains balanced.
7. Lower the stand if the phone is large, heavy or fitted with a case.
8. If charging, route the cable through the central opening without sharply bending the connector.

Usage and Stability Notes

• Maximum recommended load is approximately 350g, including the case.
• Use lower positions for heavier phones and compact tablets.
• Strong tapping, gaming or typing pressure may move the stand.
• The device must sit fully inside the 15mm cradle.
• This is not a magnetic, clamping, adhesive or wall-mounted holder.
• The base does not swivel through 360°.
• The central arm is not telescopic.
• Do not use it for full-size tablets, laptops or portable monitors.
• Do not lift or carry the stand while a device is resting on it.
• Do not force the hinges beyond their normal stopping positions.

Technical Specifications

Care Instructions

• Clean the aluminium with a soft, dry or slightly damp cloth.
• Avoid abrasive cleaners, harsh chemicals and rough scouring pads.
• Keep silicone pads free from dust, oil and moisture.
• Keep the stand away from water, steam and direct heat.
• Fold and store it without a device resting on the cradle.

What’s in the Box?

• 1 × UGREEN LP678 Adjustable Aluminium Phone Stand

Phone, tablet, charging cable and charger are shown for demonstration and are not included.

Frequently Asked Questions

UGREEN India Purchase Assurance

Genuine UGREEN product • Product warranty support • GST invoice available • India-based customer and warranty assistance

To request a GST invoice, reply to your order-confirmation email with the required billing details.