Exact SKU 10113 • researched buying guide
UGREEN 10113 25m HDMI Cable, 1080p60, ARC & HDMI Ethernet Channel
A very long 25m passive copper HDMI cable for Full HD AV routes across a large room. The corrected page uses the exact official 1080p60 length-band target, explains ARC and HDMI Ethernet Channel without overselling them, and avoids guessing conductor gauge beyond the published table.
Fast purchase decision
Overview
Best suited to
Conference-room computer to a distant Full HD projector; AV rack to a television across a large room.
Choose it for
25m reach, full-size hdmi type-a male to full-size hdmi type-a male and 1080p60.
Check first
Both endpoints need full-size HDMI. The official family table places the 12–50m length band at 1080p60.
Verified exact-model highlights
Key features
Exact length
25m; buy by the real route rather than a family length.
Connector fit
Full-size HDMI Type-A male to full-size HDMI Type-A male
Verified video target
1080p Full HD at 60Hz is the exact length-band target
Published signal rate
No exact Gbps ceiling is published for the 25m SKU
Signal direction
No Source/Display orientation is published; use between an HDMI output and HDMI input
Construction
The exact page lists tin-plated copper conductors, ground-wire/aluminium-foil/braid shielding, multiple internal shielding and gold-plated contacts. It does not publish a separate AWG or outer-diameter value for 25m, so none is inferred.
Exact-SKU guidance
How to read the video rating
Cable ceiling and actual device result are different
The official length table assigns 12–50m to 1080p60. This exact 25m cable is not positioned for 4K30, 4K60, 4K120 or 8K.
- Exact-SKU guidance: 1080p Full HD at 60Hz is the exact length-band target.
- Published rate: No exact Gbps ceiling is published for the 25m SKU.
- Both endpoints need full-size HDMI. The official family table places the 12–50m length band at 1080p60.
- A dock, KVM, receiver, switch, splitter, adapter, coupler, wall plate or extra cable can lower the final mode.
Verified functions, plainly explained
Audio and display features
1080p60 digital video and audio
Verified for this exact SKU or its official exact-SKU family; connected equipment must support it.
3D signalling on compatible equipment
Requires compatible source, display and settings.
Audio Return Channel (ARC)
Requires compatible source, display and settings.
HDMI Ethernet Channel on compatible endpoints
Requires compatible source, display and settings.
HDCP compatibility and up-to-48-bit colour wording
Requires compatible source, display and settings.
Tin-plated copper and multiple shielding
Requires compatible source, display and settings.
A cable cannot upscale content, generate frames or add a feature absent from the source or display.
Exact-SKU guidance
Construction and routing
Build and handling guidance
The exact page lists tin-plated copper conductors, ground-wire/aluminium-foil/braid shielding, multiple internal shielding and gold-plated contacts. It does not publish a separate AWG or outer-diameter value for 25m, so none is inferred.
- No Source/Display orientation is published; use between an HDMI output and HDMI input
- Plan a relaxed route and protect both connector housings from sideways pull.
- Test the exact intended mode before the route becomes hard to access.
- Do not infer an in-wall, plenum, LSZH or fire rating unless it is printed on the supplied cable.
Practical examples
Use scenarios
Home and media
Conference-room computer to a distant Full HD projector
Work and presentation
AV rack to a television across a large room
Gaming or specialist display
Set-top box or Blu-ray player to a remote display
Longer-term setup
Compatible ARC television to an AV receiver or soundbar over a long route
Connect • configure • verify
Setup and usability guidance
- Step 1: Confirm that a 25m passive route is genuinely required and that the connectors can pass through the planned path.
- Step 2: Connect the source HDMI output to the receiving display input.
- Step 3: Test 1080p60 picture and audio directly before any permanent routing.
- Step 4: For ARC, use ports labelled ARC and enable HDMI-CEC/audio return settings.
- Step 5: Support the heavy cable near both ports and avoid tight turns.
After setup, use the display information screen or operating-system display panel to confirm the resolution, refresh rate, HDR state and active audio device actually negotiated.
Exact-SKU guidance
Compatible devices and systems
Match connector shape, signal direction and port capability
- Computers, media players, set-top boxes and Blu-ray players with full-size HDMI output
- Full HD TVs, monitors and projectors with full-size HDMI input
- HDMI consoles at a mutually supported 1080p mode
- ARC-capable audio chains and HDMI Ethernet Channel endpoints when the complete system supports them
Examples do not guarantee every generation or port reaches the cable ceiling; check both device manuals.
Avoid the common mismatch
Check before buying
- The route suits 25m, including connector clearance and relaxed service slack.
- The ports match: Full-size HDMI Type-A male to full-size HDMI Type-A male.
- Connect an HDMI source output to the display input. The exact page and gallery do not state directional Source/Display markings.
- Both endpoints need full-size HDMI. The official family table places the 12–50m length band at 1080p60.
- The desired mode stays within: 1080p Full HD at 60Hz is the exact length-band target.
- Any intermediate device supports the same video, audio and content-protection requirements.
Scope and limitations
What this product does
- Provides a 25m full-size HDMI connection.
- Carries compatible 1080p60 video and digital audio.
- Passes ARC, HDMI Ethernet Channel, 3D and HDCP functions where supported.
- Uses shielded tin-plated copper construction for the long physical route.
What this product does not do
- It does not provide a verified 4K or 8K mode at 25m.
- HDMI Ethernet Channel is not an ordinary LAN cable.
- It does not create ARC, HDCP, 3D or a higher mode on unsupported ports.
- It is not an active booster, fibre AOC, splitter or signal-format converter.
Care and installation practice
What to do
- Measure the route and check connector clearance.
- Test 1080p60 directly before fixing the cable.
- Support the 25m cable near source and display ports.
- Use correctly labelled ARC ports when audio return is needed.
What not to do
- Do not buy it for 4K or 8K use.
- Do not treat HDMI Ethernet Channel as RJ45 networking.
- Do not pull the long run by its plugs.
- Do not crush, knot, staple or conceal it without a verified safety rating.
Read before use
Warnings and limitations
Capability limit
25m passive copper is a demanding route; verify the exact equipment combination before permanent installation.
Compatibility caution
The gallery is generic connector imagery and does not visually prove length; confirm 10113 and 25m on the received product.
Gallery or claim conflict
No AWG or OD is inferred for 25m because the exact page only publishes a separate value for 20m.
Installation warning
No in-wall, plenum, LSZH or fire rating is claimed.
Exact-model reference
Technical specifications
| Brand | UGREEN |
|---|---|
| SKU | 10113 |
| Product type | Long-run passive copper HDMI male-to-male cable |
| Cable length | 25 metres |
| Connectors | Full-size HDMI Type-A male to full-size HDMI Type-A male |
| Direction | No Source/Display orientation is published; use between an HDMI output and HDMI input |
| Verified video guidance | 1080p Full HD at 60Hz is the exact length-band target |
| Published bandwidth / rate | No exact Gbps ceiling is published for the 25m SKU |
| Construction | The exact page lists tin-plated copper conductors, ground-wire/aluminium-foil/braid shielding, multiple internal shielding and gold-plated contacts. It does not publish a separate AWG or outer-diameter value for 25m, so none is inferred. |
| Feature support | 1080p60 digital video and audio, 3D signalling on compatible equipment, Audio Return Channel (ARC), HDMI Ethernet Channel on compatible endpoints, HDCP compatibility and up-to-48-bit colour wording, Tin-plated copper and multiple shielding |
| Published length band | 12–50m family: 1080p60 with HDMI 1.2 wording on exact page |
| Conductor gauge / OD for 25m | Not separately published; no value inferred |
| Conductors | Tin-plated copper |
| Shielding | Ground wire, aluminium foil and braid / multiple internal shielding |
| Connector contacts | Gold-plated wording on exact page |
| Listed functions | ARC, HDMI Ethernet Channel, 3D, HDCP and up-to-48-bit colour wording |
In the box
Package contents
- 1 × UGREEN 10113 25m HDMI male-to-male cable
Shown devices and accessories are not included. Confirm SKU 10113 and 25m before routing.
Selected and visually checked
Exact-product media
Selected after exact-listing review; duplicates, wrong-model media and conflicting artwork were excluded.
Tap a question to expand
Product-specific FAQ
What is the verified video guidance for UGREEN 10113?
1080p Full HD at 60Hz is the exact length-band target. The official length table assigns 12–50m to 1080p60. This exact 25m cable is not positioned for 4K30, 4K60, 4K120 or 8K.
Is the cable directional?
Connect an HDMI source output to the display input. The exact page and gallery do not state directional Source/Display markings.
What ports and source capability are required?
Full-size HDMI Type-A male to full-size HDMI Type-A male. Both endpoints need full-size HDMI. The official family table places the 12–50m length band at 1080p60.
Will every compatible-looking device reach the maximum mode?
No. The source hardware, port version, graphics driver, operating system, display input, selected colour format and every intermediate device determine the negotiated result.
Does it need a driver or separate power adapter?
No separate cable driver or external power adapter is listed. The host graphics system may still need the correct driver and display settings.
Does SKU 10113 support 4K?
No 4K claim is used. The exact official table positions the 12–50m family, including this 25m cable, at 1080p60.
What cable gauge is used at 25m?
The exact page lists a 24AWG/10mm value for 20m but not a separate value for 25m. This page therefore does not guess the 25m gauge or diameter.
What should I check if there is no picture?
Verify connector direction and port type, select the correct display input, reseat both ends, test a direct connection, lower the resolution/refresh rate, and restart or update the graphics system if needed.
Can it be routed inside a wall or ceiling?
No concealed-installation rating is claimed here. Check the physical cable markings and local installation requirements before any in-wall, ceiling or conduit route.
What is included in the package?
1 × UGREEN 10113 25m HDMI male-to-male cable. Devices, adapters and cable-management accessories shown in use images are not included.
