Exact SKU 10112 • researched buying guide
UGREEN 10112 20m HDMI Cable, 1080p60, ARC & HDMI Ethernet Channel
A long 20m passive copper HDMI cable for Full HD projection, television, conference and AV routes. It prioritises an honestly stated 1080p60 target and includes length-specific conductor details instead of borrowing the higher 4K claims shown only for shorter family cables.
Fast purchase decision
Overview
Best suited to
Conference computer to a distant Full HD projector; Equipment rack to a television across a room.
Choose it for
20m reach, full-size hdmi type-a male to full-size hdmi type-a male and 1080p60.
Check first
Both devices need compatible full-size HDMI ports. The official length table positions the 12–50m family at 1080p60 rather than 4K.
Verified exact-model highlights
Key features
Exact length
20m; buy by the real route rather than a family length.
Connector fit
Full-size HDMI Type-A male to full-size HDMI Type-A male
Verified video target
1080p Full HD at 60Hz is the exact length-band target
Published signal rate
No exact Gbps ceiling is published for the 20m SKU
Signal direction
No Source/Display orientation is published; use between an HDMI output and HDMI input
Construction
The exact page lists tin-plated copper conductors, multiple internal shielding, ground wire plus aluminium foil plus braid, gold-plated contacts, 24AWG construction and approximately 10.0mm outer diameter for the 20m length.
Exact-SKU guidance
How to read the video rating
Cable ceiling and actual device result are different
The exact official length table assigns 12–50m to 1080p60. This 20m model is therefore not positioned for 4K30, 4K60, 4K120 or 8K.
- Exact-SKU guidance: 1080p Full HD at 60Hz is the exact length-band target.
- Published rate: No exact Gbps ceiling is published for the 20m SKU.
- Both devices need compatible full-size HDMI ports. The official length table positions the 12–50m family at 1080p60 rather than 4K.
- A dock, KVM, receiver, switch, splitter, adapter, coupler, wall plate or extra cable can lower the final mode.
Verified functions, plainly explained
Audio and display features
1080p60 digital video and audio
Verified for this exact SKU or its official exact-SKU family; connected equipment must support it.
3D signalling on compatible equipment
Requires compatible source, display and settings.
Audio Return Channel (ARC)
Requires compatible source, display and settings.
HDMI Ethernet Channel on compatible endpoints
Requires compatible source, display and settings.
HDCP compatibility and up-to-48-bit colour wording
Requires compatible source, display and settings.
Long passive copper route with multiple shielding
Requires compatible source, display and settings.
A cable cannot upscale content, generate frames or add a feature absent from the source or display.
Exact-SKU guidance
Construction and routing
Build and handling guidance
The exact page lists tin-plated copper conductors, multiple internal shielding, ground wire plus aluminium foil plus braid, gold-plated contacts, 24AWG construction and approximately 10.0mm outer diameter for the 20m length.
- No Source/Display orientation is published; use between an HDMI output and HDMI input
- Plan a relaxed route and protect both connector housings from sideways pull.
- Test the exact intended mode before the route becomes hard to access.
- Do not infer an in-wall, plenum, LSZH or fire rating unless it is printed on the supplied cable.
Practical examples
Use scenarios
Home and media
Conference computer to a distant Full HD projector
Work and presentation
Equipment rack to a television across a room
Gaming or specialist display
Set-top box or Blu-ray player to a remote monitor
Longer-term setup
Compatible TV ARC port to a distant AV receiver or soundbar at Full HD system requirements
Connect • configure • verify
Setup and usability guidance
- Step 1: Measure the full route and account for a thick 10mm-class cable and connector clearance.
- Step 2: Connect the HDMI source output to the display input.
- Step 3: Test a direct 1080p60 picture and audio before fixing or hiding any route.
- Step 4: For ARC, use ports labelled ARC and enable the required HDMI-CEC/audio settings.
- Step 5: Support the heavy long cable near each socket so the port does not carry its weight.
After setup, use the display information screen or operating-system display panel to confirm the resolution, refresh rate, HDR state and active audio device actually negotiated.
Exact-SKU guidance
Compatible devices and systems
Match connector shape, signal direction and port capability
- Computers, set-top boxes, Blu-ray players and media devices with full-size HDMI output
- Full HD televisions, monitors and projectors with HDMI input
- HDMI game consoles at a mutually supported 1080p mode
- ARC-capable TVs and audio equipment; HDMI Ethernet Channel only when both endpoints support it
Examples do not guarantee every generation or port reaches the cable ceiling; check both device manuals.
Avoid the common mismatch
Check before buying
- The route suits 20m, including connector clearance and relaxed service slack.
- The ports match: Full-size HDMI Type-A male to full-size HDMI Type-A male.
- Connect an HDMI source output to the receiving display input. The exact page and gallery do not state directional Source/Display ends.
- Both devices need compatible full-size HDMI ports. The official length table positions the 12–50m family at 1080p60 rather than 4K.
- The desired mode stays within: 1080p Full HD at 60Hz is the exact length-band target.
- Any intermediate device supports the same video, audio and content-protection requirements.
Scope and limitations
What this product does
- Provides a 20m full-size HDMI connection.
- Carries compatible 1080p60 digital video and audio.
- Passes ARC, HDMI Ethernet Channel, 3D and HDCP functions when supported end to end.
- Uses a shielded tin-plated copper long-run construction.
What this product does not do
- It does not provide a verified 4K or 8K mode at this length.
- HDMI Ethernet Channel is not an ordinary LAN/Ethernet cable connection.
- It does not add ARC, HDCP or 3D to ports that lack those functions.
- It is not an active repeater, fibre AOC, signal booster or format converter.
Care and installation practice
What to do
- Buy by exact 20m route length and verify connector clearance.
- Test 1080p60 directly before permanent routing.
- Support the cable near both HDMI sockets.
- Use labelled ARC ports if audio return is required.
What not to do
- Do not purchase it for 4K or 8K use.
- Do not treat HDMI Ethernet Channel as a router-to-device LAN cable.
- Do not pull the 20m run by its connector housings.
- Do not sharply bend, crush, staple or conceal it without a verified rating.
Read before use
Warnings and limitations
Capability limit
A long passive copper route has less signal margin than a short cable; direct pre-installation testing is important.
Compatibility caution
Exact live gallery contains two duplicated six-image sets, including assets shared with SKU 10113; only unlabeled connector views from the 10112-associated set are used.
Gallery or claim conflict
The cable’s weight must not hang from the device ports.
Installation warning
No in-wall, plenum, LSZH or fire rating is claimed.
Exact-model reference
Technical specifications
| Brand | UGREEN |
|---|---|
| SKU | 10112 |
| Product type | Long-run passive copper HDMI male-to-male cable |
| Cable length | 20 metres |
| Connectors | Full-size HDMI Type-A male to full-size HDMI Type-A male |
| Direction | No Source/Display orientation is published; use between an HDMI output and HDMI input |
| Verified video guidance | 1080p Full HD at 60Hz is the exact length-band target |
| Published bandwidth / rate | No exact Gbps ceiling is published for the 20m SKU |
| Construction | The exact page lists tin-plated copper conductors, multiple internal shielding, ground wire plus aluminium foil plus braid, gold-plated contacts, 24AWG construction and approximately 10.0mm outer diameter for the 20m length. |
| Feature support | 1080p60 digital video and audio, 3D signalling on compatible equipment, Audio Return Channel (ARC), HDMI Ethernet Channel on compatible endpoints, HDCP compatibility and up-to-48-bit colour wording, Long passive copper route with multiple shielding |
| Published length band | 12–50m family: 1080p60 with HDMI 1.2 wording on exact page |
| Conductor gauge for 20m | 24AWG |
| Approximate outer diameter for 20m | 10.0mm |
| Conductors | Tin-plated copper |
| Shielding | Ground wire, aluminium foil and braid / multiple internal shielding |
| Listed functions | ARC, HDMI Ethernet Channel, 3D, HDCP and up-to-48-bit colour wording |
In the box
Package contents
- 1 × UGREEN 10112 20m HDMI male-to-male cable
Shown devices and accessories are not included. Confirm SKU 10112 and 20m before routing.
Tap a question to expand
Product-specific FAQ
What is the verified video guidance for UGREEN 10112?
1080p Full HD at 60Hz is the exact length-band target. The exact official length table assigns 12–50m to 1080p60. This 20m model is therefore not positioned for 4K30, 4K60, 4K120 or 8K.
Is the cable directional?
Connect an HDMI source output to the receiving display input. The exact page and gallery do not state directional Source/Display ends.
What ports and source capability are required?
Full-size HDMI Type-A male to full-size HDMI Type-A male. Both devices need compatible full-size HDMI ports. The official length table positions the 12–50m family at 1080p60 rather than 4K.
Will every compatible-looking device reach the maximum mode?
No. The source hardware, port version, graphics driver, operating system, display input, selected colour format and every intermediate device determine the negotiated result.
Does it need a driver or separate power adapter?
No separate cable driver or external power adapter is listed. The host graphics system may still need the correct driver and display settings.
Does HDMI Ethernet Channel replace a network cable?
No. It is an HDMI feature that only works between compatible HDMI Ethernet Channel endpoints; it is not a general RJ45 LAN connection.
Does SKU 10112 support 4K?
No 4K claim is used. The exact official length table positions 12–50m cables, including this 20m model, at 1080p60.
What should I check if there is no picture?
Verify connector direction and port type, select the correct display input, reseat both ends, test a direct connection, lower the resolution/refresh rate, and restart or update the graphics system if needed.
Can it be routed inside a wall or ceiling?
No concealed-installation rating is claimed here. Check the physical cable markings and local installation requirements before any in-wall, ceiling or conduit route.
What is included in the package?
1 × UGREEN 10112 20m HDMI male-to-male cable. Devices, adapters and cable-management accessories shown in use images are not included.
