Reach from a low wall outlet to a laptop on a desk or table without moving the charger.
UGREEN Uno 3m 100W USB-C Cable with LED
Overview
UGREEN Uno 35513 is a long 3-metre / 9.8-foot USB-C to USB-C cable for charging compatible laptops, tablets, phones and accessories from a USB-C power source. It carries up to 100W at 20V/5A with compatible PD equipment, includes an E-marker and provides USB 2.0 data up to 480Mbps. The Uno connector has an expressive LED status face, while the braided cable gives extra reach from a wall charger to a desk, sofa or bedside position.

The LED is a status feature, not a power meter
The connector face provides a visible charging-status indication. It is a status cue rather than a calibrated numeric wattage meter, so use the connected device's own screen when exact charging information matters.
Key features
- Supports up to 100W USB-C PD charging with a compatible charger, device and negotiated 20V/5A profile.
- An integrated E-marker communicates the cable's 5A capability to compliant USB-C power equipment.
- Uno LED face gives an at-a-glance charging-status cue near the connector.
- USB 2.0 data transfer supports up to 480Mbps for routine sync and files.
- Three-metre braided construction provides reach while helping resist tangles and everyday abrasion.

Use scenarios
Charge a phone or tablet while using it from a sofa, bed or presentation area.
Route power cleanly around a standing desk while keeping the charger off the work surface.
Connect a USB-C device to a nearby computer for USB 2.0 syncing when the longer path is genuinely needed.

Technical specifications
| Brand / SKU | UGREEN Uno / 35513 |
|---|---|
| Product type | USB-C to USB-C charging and data cable |
| Length | 3 metres / 9.8 feet |
| Connectors | USB-C male to USB-C male |
| Maximum charging | Up to 100W |
| Maximum profile | 20V / 5A |
| Cable identification | Integrated E-marker |
| Indicator | Uno LED charging-status face |
| Data standard | USB 2.0 |
| Maximum data rate | Up to 480Mbps |
| Construction | Braided, tangle-resistant jacket |
| Video output | Not supported |
Setup and usability guidance
Plan the three-metre route so the cable is not pinched by furniture or stretched across a walking path.
Connect the charger and USB-C device; the equipment negotiates the supported power automatically.
Use a 100W-capable USB-C PD source and compatible receiving device for the maximum cable rating.
Confirm the LED status indication after connection, then verify actual charging on the device itself.
For data, use ports that support data. Coil unused length loosely and keep it ventilated during high-power charging.

Compatible devices and systems
- Suitable for compatible USB-C PD laptops, tablets, phones, handheld consoles, power banks and other USB-C equipment.
- Can carry lower charging levels safely when a device accepts less than 100W.
- Data sync requires a data-capable USB-C host; many dedicated charger ports supply power only.
- Does not fit Lightning or USB-A ports directly and does not support USB-C display video.

How real-world performance is decided
Advertised maximums describe what the product can support under a compatible setup; they are not a promise of constant power or speed. The connected source, cable or adapter, receiving device, active ports, software, battery state and temperature can each set a lower operating limit.
For this exact model, the practical starting point is: 3m / 9.8ft reach • 100W / 20V 5A • LED status face • 480Mbps data. Confirm the required connector and use the verified specifications below when planning the complete signal or charging path.

What this product does
- Provides a long three-metre USB-C charging connection.
- Carries negotiated USB-C PD power up to 100W.
- Shows a connector-face charging-status indication.
- Transfers USB 2.0 data at up to 480Mbps.

What this product does not do
- It does not provide a verified numeric wattage readout.
- It does not carry monitor video, USB4 or Thunderbolt signals.
- It does not make a lower-powered charger deliver 100W.
- It does not include a wall charger or device.
What to do
- Route the long cable away from doorways, wheels and chair legs.
- Use a 5A-compatible PD setup for charging above 60W.
- Check the device screen when exact charging state matters.
- Grip the plug housing when disconnecting and coil loosely after use.
What not to do
- Do not cover a tightly coiled cable during high-power charging.
- Do not pull the three-metre lead taut between two ports.
- Do not interpret the LED face as laboratory measurement equipment.
- Do not use damaged braid, loose connectors or a cable that becomes abnormally hot.
Check before buying
Suitable for compatible USB-C PD laptops, tablets, phones, handheld consoles, power banks and other USB-C equipment.
It does not provide a verified numeric wattage readout.
Actual charging power is limited by the charger, device, battery state and negotiated protocol.
No USB-C wall charger or connected device is listed as included
Warnings and limitations
- Actual charging power is limited by the charger, device, battery state and negotiated protocol.
- A long cable should be routed carefully to avoid trips, crushing and repeated tight bends.
- Connecting another device to a shared charger can cause power renegotiation and a brief charging pause.
- USB 2.0 data is limited to 480Mbps and does not imply video support.
- Keep the connector and LED area dry; disconnect before cleaning.
Package contents
- 1 × UGREEN Uno 35513 3m / 9.8ft 100W USB-C cable with LED status face
- No USB-C wall charger or connected device is listed as included
Product-specific FAQ
UGREEN 35513 at a glance
Choose this product when its exact connectors, verified power or data capability, physical format and stated limitations match the intended setup.
-
Dimentions
-
Warranty
-
Length
-
Version
-
Connector Type
-
Cable Type
-
Weight
GST Invoice available, just mail back with details to order confirmation mail.
Buy direct from official UGREEN India
GST Invoice, Warranty, authenticity, faster support






