Namaste ! Vanakkam ! Namashkara ! Jai Jinendra ! India
Free Shipping for Normal Deliveries on orders above Rs. 999
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
its compact and worth it .. 10/10
Excellent product. The feel and finish is amazing. You forget to take it off the phone. It’s that good.
One of the best portable power banks
Things to consider - iphone does not support LDAC and if your Android does not have LDAC, then it will use AAC because this model does not support APTX codecs. But overall it is a durable and quality product without any extra fuss. Working great!
UGREEN 20500 is a passive 2m three-pin XLR male-to-female cable with a nylon-braided jacket and zinc-alloy connector shells for compatible balanced microphone and line-level audio paths. This guide uses the exact active Shopify record, every meaningful product-owned gallery image and exact UGREEN evidence to keep direction, connector, sample-rate, microphone, power and compatibility claims revision-specific.
a passive 2m three-pin XLR male-to-female cable with a nylon-braided jacket and zinc-alloy connector shells for compatible balanced microphone and line-level audio paths.
The cable is pin-to-pin and can carry a compatible balanced analogue path. In a normal microphone chain, the female connector attaches to the microphone/output and the male connector feeds the mixer, preamp, recorder, interface or powered input.
There is no DAC, codec, gain, preamp or active noise cancellation. Copper conductors and layered shielding help resist external interference, but correct grounding, balanced endpoints and sensible gain staging are still required.
No battery or supply. Lower gain and disable phantom power before patching. Do not use it as a mains lead or high-power passive-speaker cable.
The cable is pin-to-pin and can carry a compatible balanced analogue path. In a normal microphone chain, the female connector attaches to the microphone/output and the male connector feeds the mixer, preamp, recorder, interface or powered input.
Connector rule: an output must feed the matching input. Physical fit does not prove electrical role, microphone wiring, charging protocol or signal level.
Safe start: lower volume or gain, check labels and connect one complete path before adding any charger, second endpoint or application.
There is no DAC, codec, gain, preamp or active noise cancellation. Copper conductors and layered shielding help resist external interference, but correct grounding, balanced endpoints and sensible gain staging are still required.
Source recording, operating-system mode, app processing, cable path, gain staging and destination equipment all affect the heard or recorded result. A format ceiling is not a promise of better sound from every source.
Suitable for compatible three-pin XLR dynamic, condenser and shotgun microphones plus balanced XLR equipment. Phantom power can pass through a sound cable when supplied by compatible equipment; the cable does not create or regulate it.
No controls. Use the latch correctly, secure the cable against pulls and make level adjustments at the connected equipment.
Dynamic microphone to stage mixer.
Condenser microphone to phantom-capable interface.
Shotgun microphone to compatible recorder.
Mixer output to a balanced powered-speaker input.
Two-metre studio patch between compatible XLR equipment.
Usability tip: test playback and microphone or charging separately before relying on simultaneous operation.
Standard three-pin XLR microphones, mixers, preamps, audio interfaces, studio recorders, active speakers, PA systems and other compatible XLR devices. A camera with XLR is suitable only when its input format and power settings match.
Check 20500 on the product or package before relying on these specifications.
Lower headphone volume, speaker level, microphone gain or channel fader before connection.
Verify one source, adapter/cable and destination before adding more equipment.
Disconnect power, remove lint without metal tools and allow complete drying before reuse.
Select the intended playback and recording devices; physical connection alone may not change routing.
Coil cables loosely and protect exposed plugs, pins and adapter housings.
Stop if alignment, case clearance, pins or latch do not match.
Inputs and outputs can share the same connector shape.
Use only the exact sample-rate or signal claim listed for this SKU.
High playback levels can injure hearing and overload equipment.
For XLR, mute and disable phantom power before changing connections.
Keep leads away from pedals, controls, doors, wheels, children and walkways.
Power behaviour: No battery or supply. Lower gain and disable phantom power before patching. Do not use it as a mains lead or high-power passive-speaker cable.
Check source output selection, destination input, mute state, volume and full connector seating.
Confirm an exact mic-return path, correct TRRS/XLR wiring, recording-device selection and app permission.
Confirm that this SKU supports charging, then test a compatible charger/cable and inspect host limits.
Separate signal leads from power bricks, test another port/path and verify balanced grounding or AUX input role.
Reinsert the plug fully, inspect contacts and test each device with a known-good cable or headset.
Try a direct data-capable USB port, reboot audio services and check exact operating-system support.
| Product | Braided XLR male-to-female microphone cable |
|---|---|
| SKU | 20500 |
| Length | 2m |
| Connectors | Three-pin XLR male and female |
| Signal | Passive balanced analogue with compatible balanced endpoints |
| Conductor | Copper |
| Shielding | PE insulation, cotton layer, copper shield and TPE jacket shown |
| Outer jacket | Nylon braided |
| Connector shells | Zinc alloy |
| Phantom power | Pass-through with compatible equipment; not generated |
| Conversion / gain | None |
| Battery | None |
Format figures are device ceilings or stated maxima under suitable conditions; compatible equipment may negotiate or operate at lower values.
Included: one UGREEN 20500 2m braided XLR male-to-female cable; microphone, mixer, interface and phantom-power supply are not included.
It is a passive 2m three-pin XLR male-to-female cable with a nylon-braided jacket and zinc-alloy connector shells for compatible balanced microphone and line-level audio paths.
The cable is pin-to-pin and can carry a compatible balanced analogue path. In a normal microphone chain, the female connector attaches to the microphone/output and the male connector feeds the mixer, preamp, recorder, interface or powered input.
There is no DAC, codec, gain, preamp or active noise cancellation. Copper conductors and layered shielding help resist external interference, but correct grounding, balanced endpoints and sensible gain staging are still required.
Suitable for compatible three-pin XLR dynamic, condenser and shotgun microphones plus balanced XLR equipment. Phantom power can pass through a sound cable when supplied by compatible equipment; the cable does not create or regulate it.
No. Balanced-noise rejection requires compatible balanced wiring and equipment at both ends.
No. not USB, not a microphone preamp, not a 6.35mm instrument cable, not a passive-speaker power lead and not proof that any two XLR-shaped ports have matching signal level or direction.
Standard three-pin XLR microphones, mixers, preamps, audio interfaces, studio recorders, active speakers, PA systems and other compatible XLR devices. A camera with XLR is suitable only when its input format and power settings match.
Mute outputs, lower gain and switch phantom power off. Inspect the three pins, sockets, latch and braided jacket. Connect female XLR to the source and male XLR to the receiving input.
Confirm connector role and seating, system input/output selection, volume/gain, app permissions and one known-good source/destination before changing multiple variables.
one UGREEN 20500 2m braided XLR male-to-female cable; microphone, mixer, interface and phantom-power supply are not included.
not USB, not a microphone preamp, not a 6.35mm instrument cable, not a passive-speaker power lead and not proof that any two XLR-shaped ports have matching signal level or direction.
GST Invoice available, just mail back with details to order confirmation mail.
GST Invoice, Warranty, authenticity, faster support
UGREEN 20500 is a passive 2m three-pin XLR male-to-female cable with a nylon-braided jacket and zinc-alloy connector shells for compatible balanced microphone and line-level audio paths. This guide uses the exact active Shopify record, every meaningful product-owned gallery image and exact UGREEN evidence to keep direction, connector, sample-rate, microphone, power and compatibility claims revision-specific.
a passive 2m three-pin XLR male-to-female cable with a nylon-braided jacket and zinc-alloy connector shells for compatible balanced microphone and line-level audio paths.
The cable is pin-to-pin and can carry a compatible balanced analogue path. In a normal microphone chain, the female connector attaches to the microphone/output and the male connector feeds the mixer, preamp, recorder, interface or powered input.
There is no DAC, codec, gain, preamp or active noise cancellation. Copper conductors and layered shielding help resist external interference, but correct grounding, balanced endpoints and sensible gain staging are still required.
No battery or supply. Lower gain and disable phantom power before patching. Do not use it as a mains lead or high-power passive-speaker cable.
The cable is pin-to-pin and can carry a compatible balanced analogue path. In a normal microphone chain, the female connector attaches to the microphone/output and the male connector feeds the mixer, preamp, recorder, interface or powered input.
Connector rule: an output must feed the matching input. Physical fit does not prove electrical role, microphone wiring, charging protocol or signal level.
Safe start: lower volume or gain, check labels and connect one complete path before adding any charger, second endpoint or application.
There is no DAC, codec, gain, preamp or active noise cancellation. Copper conductors and layered shielding help resist external interference, but correct grounding, balanced endpoints and sensible gain staging are still required.
Source recording, operating-system mode, app processing, cable path, gain staging and destination equipment all affect the heard or recorded result. A format ceiling is not a promise of better sound from every source.
Suitable for compatible three-pin XLR dynamic, condenser and shotgun microphones plus balanced XLR equipment. Phantom power can pass through a sound cable when supplied by compatible equipment; the cable does not create or regulate it.
No controls. Use the latch correctly, secure the cable against pulls and make level adjustments at the connected equipment.
Dynamic microphone to stage mixer.
Condenser microphone to phantom-capable interface.
Shotgun microphone to compatible recorder.
Mixer output to a balanced powered-speaker input.
Two-metre studio patch between compatible XLR equipment.
Usability tip: test playback and microphone or charging separately before relying on simultaneous operation.
Standard three-pin XLR microphones, mixers, preamps, audio interfaces, studio recorders, active speakers, PA systems and other compatible XLR devices. A camera with XLR is suitable only when its input format and power settings match.
Check 20500 on the product or package before relying on these specifications.
Lower headphone volume, speaker level, microphone gain or channel fader before connection.
Verify one source, adapter/cable and destination before adding more equipment.
Disconnect power, remove lint without metal tools and allow complete drying before reuse.
Select the intended playback and recording devices; physical connection alone may not change routing.
Coil cables loosely and protect exposed plugs, pins and adapter housings.
Stop if alignment, case clearance, pins or latch do not match.
Inputs and outputs can share the same connector shape.
Use only the exact sample-rate or signal claim listed for this SKU.
High playback levels can injure hearing and overload equipment.
For XLR, mute and disable phantom power before changing connections.
Keep leads away from pedals, controls, doors, wheels, children and walkways.
Power behaviour: No battery or supply. Lower gain and disable phantom power before patching. Do not use it as a mains lead or high-power passive-speaker cable.
Check source output selection, destination input, mute state, volume and full connector seating.
Confirm an exact mic-return path, correct TRRS/XLR wiring, recording-device selection and app permission.
Confirm that this SKU supports charging, then test a compatible charger/cable and inspect host limits.
Separate signal leads from power bricks, test another port/path and verify balanced grounding or AUX input role.
Reinsert the plug fully, inspect contacts and test each device with a known-good cable or headset.
Try a direct data-capable USB port, reboot audio services and check exact operating-system support.
| Product | Braided XLR male-to-female microphone cable |
|---|---|
| SKU | 20500 |
| Length | 2m |
| Connectors | Three-pin XLR male and female |
| Signal | Passive balanced analogue with compatible balanced endpoints |
| Conductor | Copper |
| Shielding | PE insulation, cotton layer, copper shield and TPE jacket shown |
| Outer jacket | Nylon braided |
| Connector shells | Zinc alloy |
| Phantom power | Pass-through with compatible equipment; not generated |
| Conversion / gain | None |
| Battery | None |
Format figures are device ceilings or stated maxima under suitable conditions; compatible equipment may negotiate or operate at lower values.
Included: one UGREEN 20500 2m braided XLR male-to-female cable; microphone, mixer, interface and phantom-power supply are not included.
It is a passive 2m three-pin XLR male-to-female cable with a nylon-braided jacket and zinc-alloy connector shells for compatible balanced microphone and line-level audio paths.
The cable is pin-to-pin and can carry a compatible balanced analogue path. In a normal microphone chain, the female connector attaches to the microphone/output and the male connector feeds the mixer, preamp, recorder, interface or powered input.
There is no DAC, codec, gain, preamp or active noise cancellation. Copper conductors and layered shielding help resist external interference, but correct grounding, balanced endpoints and sensible gain staging are still required.
Suitable for compatible three-pin XLR dynamic, condenser and shotgun microphones plus balanced XLR equipment. Phantom power can pass through a sound cable when supplied by compatible equipment; the cable does not create or regulate it.
No. Balanced-noise rejection requires compatible balanced wiring and equipment at both ends.
No. not USB, not a microphone preamp, not a 6.35mm instrument cable, not a passive-speaker power lead and not proof that any two XLR-shaped ports have matching signal level or direction.
Standard three-pin XLR microphones, mixers, preamps, audio interfaces, studio recorders, active speakers, PA systems and other compatible XLR devices. A camera with XLR is suitable only when its input format and power settings match.
Mute outputs, lower gain and switch phantom power off. Inspect the three pins, sockets, latch and braided jacket. Connect female XLR to the source and male XLR to the receiving input.
Confirm connector role and seating, system input/output selection, volume/gain, app permissions and one known-good source/destination before changing multiple variables.
one UGREEN 20500 2m braided XLR male-to-female cable; microphone, mixer, interface and phantom-power supply are not included.
not USB, not a microphone preamp, not a 6.35mm instrument cable, not a passive-speaker power lead and not proof that any two XLR-shaped ports have matching signal level or direction.
Visit our support center
Expert help & advice
Check your order status
Updates & tracking
Returns & exchanges
All you need to know
Price-match guarantee
Our promise to you
