UGREEN LP130 Gravity Auto-Lock Air Vent Car Phone Holder – 360° Adj...
UGREEN LP130 • SKU 50564
Place your phone in—the gravity cradle closes automatically
The UGREEN LP130 Gravity Air Vent Car Phone Holder uses your phone’s downward weight to draw the side arms inward automatically. Its triangular cradle, padded contact points and adjustable ball joint provide a compact mounting solution for compatible horizontal car air vents.
Simple mechanical operation—no buttons, magnets or power
Gravity auto-lock
Placing the phone onto the lower support activates the linked side arms automatically.
Triangular support
The two side arms and lower support form a balanced triangular holding structure around the phone.
Adjustable viewing angle
The 360° ball joint helps fine-tune the upright screen angle for the installed vent position.
Charging-port access
The open lower cradle leaves space around many centrally positioned charging ports.
How the gravity mechanism works
When the phone presses down on the lower cradle, the connected side arms move inward. Lifting the phone removes the downward pressure and allows the cradle to reopen. The system is entirely mechanical and requires no motor, battery, magnet, app or electrical connection.
Check your car’s air vent before ordering
The product gallery specifies compatibility with most horizontal air vents. Because vehicle vent designs vary, blade direction alone does not guarantee fit.
Generally suitable
- Straight horizontal vent blades
- Firm and undamaged vent slats
- Adequate spacing around the clip
- Sufficient clearance for the phone and cradle
Not recommended
- Round or turbine-style vents
- Vertical-only vent blades
- Retractable or motorised vents
- Widely spaced, deeply recessed or strongly curved vents
- Loose, fragile, cracked or damaged vent blades
360° ball-joint adjustment
The ball joint lets you angle the upright phone towards the driver or passenger and compensate for the position of a compatible vent. The padded vent clip and cradle contact areas help improve grip while reducing direct contact with the vent and phone case.
Phone and case compatibility
The cradle is designed for approximately 4.7–7.2-inch smartphones measuring between approximately 50 and 87 mm wide. The phone and case together must not exceed approximately 11 mm in thickness.
| Suggested screen size | Approximately 4.7–7.2 inches |
|---|---|
| Supported phone width | Approximately 50–87 mm, including the case |
| Maximum combined thickness | Approximately 11 mm, including the case |
| Required orientation | Portrait/upright only |
| Recommended case | Slim or regular case within the supported width and thickness |
Convenient insertion and removal
Place the phone upright onto the lower support and allow its weight to close the side arms. To remove it, lift the phone upwards and the arms will release. For safety, insert, remove or adjust the phone only while the vehicle is securely parked.
Gravity-linked triangular support
The two side arms and lower support create a triangular arrangement around the phone. Aluminium-alloy structural elements, ABS components and silicone contact pads combine mechanical support with cushioned contact around the phone and vent clip.
Connect a charging cable while mounted
The separated lower supports leave an opening around many centrally positioned charging and wired-audio ports. This allows a compatible cable to remain connected while the phone is in the cradle.
Charging equipment is not built in: this is a passive phone holder. A compatible cable and car charger must be purchased or supplied separately.
How to install and use
- Inspect the vent: choose a firm, undamaged horizontal vent blade with adequate surrounding clearance.
- Attach the clip: push the padded air-vent clip fully onto the selected blade.
- Set the angle: adjust the ball joint to a comfortable upright viewing position while parked.
- Insert the phone: place the phone vertically onto the lower support and allow gravity to close the side arms.
- Check the fit: confirm that all contact points sit securely around the phone case.
- Test stability: gently check both the vent clip and phone cradle before driving.
- Remove while parked: lift the phone upwards to release the gravity linkage.
Technical specifications
| Brand | UGREEN |
|---|---|
| Model | LP130 |
| SKU | 50564 |
| Product type | Gravity air-vent car phone holder |
| Holding mechanism | Mechanical gravity auto-lock cradle |
| Mounting location | Compatible horizontal car air vent |
| Phone width | Approximately 50–87 mm |
| Maximum combined thickness | Approximately 11 mm |
| Suggested screen size | Approximately 4.7–7.2 inches |
| Required phone orientation | Portrait/upright only |
| Angle adjustment | 360° ball joint |
| Main materials | Aluminium alloy, ABS and silicone |
| Colour | Space Grey and Black |
| Magnetic mounting | No |
| Charging function | No—passive holder only |
| EAN / GTIN | 6957303855643 |
Important safety and usage guidance
- Install, adjust, insert or remove the phone only while the vehicle is securely parked.
- Use the phone only in upright portrait orientation.
- Do not position the phone where it obstructs the driver’s view, controls, instruments or airbag deployment area.
- Do not use the holder on loose, damaged, motorised or fragile vent blades.
- Check that the phone, case and vent design meet the stated compatibility requirements.
- Inspect the vent clip, ball joint and gravity linkage before every journey.
- Road conditions, phone weight, case design and vent strength can affect holding performance.
- Hot air from the vent may increase phone temperature; redirect or close airflow when necessary.
- Remove the phone immediately if the holder or vent clip becomes loose.
What’s in the box?
1 × UGREEN LP130 Gravity Air Vent Car Phone Holder
Phone, charging cable, car charger and other demonstration accessories are not included.
Frequently asked questions
How does the gravity auto-lock work?
The phone presses down on the lower support, mechanically drawing the side arms inward. Lifting the phone releases the downward pressure and allows the arms to open.
Will it fit my phone?
It supports phones approximately 50–87 mm wide and up to 11 mm thick, including the case. The listed screen-size guide is approximately 4.7–7.2 inches.
Can it be used with a phone case?
Yes, if the complete phone-and-case dimensions remain within the supported limits. Thick rugged cases, card wallets, finger rings and battery cases may not fit correctly.
Can I use the phone in landscape orientation?
No. The phone must remain upright because the gravity mechanism depends on downward pressure against the lower support.
What does 360° rotation mean?
It refers to the adjustable ball joint used to fine-tune the upright screen angle. It does not mean that the gravity cradle supports horizontal phone use.
Does it fit vertical or round vents?
The product gallery specifies most horizontal air vents. Vertical-only, round, turbine-style, retractable and irregular vents are not recommended.
Can I connect a charging cable while the phone is mounted?
Yes. The lower opening provides access to many centrally positioned charging ports, subject to the phone and connector design.
Does the holder charge the phone?
No. It is a passive mechanical phone holder with no charging coil, electrical connector, battery or motor.
Is it magnetic or MagSafe-compatible?
No. The phone is held by mechanical gravity-linked arms, not magnets.
Can I insert or remove the phone with one hand?
The gravity mechanism is designed for convenient insertion and removal. For safety, handle the phone only while the vehicle is securely parked.
UGREEN India product assurance
Genuine UGREEN product supplied with GST invoice availability, India-based customer assistance and a 2-year direct warranty, subject to the applicable warranty terms.
Keep the invoice, retail packaging and product identification details for warranty assistance.
-
Warranty
GST Invoice available, just mail back with details to order confirmation mail.
Buy direct from official UGREEN India
GST Invoice, Warranty, authenticity, faster support
