3m USB-A to Mini-USB data and power cable
UGREEN 10386 USB-A to Mini-USB Cable, 3m
Connect a standard USB-A host or charger to older equipment with a Mini-USB Type-B 5-pin port. This exact 3m model supports USB 2.0 data up to 480Mbps and device-controlled USB charging; it is not Micro-USB or USB-C.
Product introduction
Overview
UGREEN model 10386 is a 3m cable with a standard USB Type-A male plug at one end and a Mini-USB Type-B 5-pin male plug at the other. It is intended for compatible cameras, GPS receivers, dash cameras, game controllers, media players and other legacy devices whose manual or socket diagram specifically identifies Mini-USB.
It carries USB 2.0 data at a stated signalling rate of up to 480Mbps and is backward compatible with USB 1.1 and USB 1.0 speeds. Real file-transfer speed depends on the host port, device controller, storage and software; the published figure is not a guaranteed file-copy result.
The 3m length is designed for equipment positioned farther from the computer or USB-A power source. The exact Spain page lists charging support up to 2A, but actual current and charging time remain limited by the host, device and voltage drop across the route. Charging is supported only to the level negotiated or accepted by the connected device and power source. The cable does not add a modern fast-charge protocol, and no charger is included.
Quick reference
Key features
Connections and roles
Confirm the small connector before ordering
USB-A end
Connect to a computer, powered USB hub, USB-A charger, car USB outlet or power bank that provides a standard USB-A receptacle.
Mini-USB device end
Connect only to a device with the older Mini-USB Type-B 5-pin socket shown in the product image.
Data path
Use with a computer or another USB host when the connected Mini-USB device exposes a supported data function.
Power path
Use a suitable USB-A power source when the connected Mini-USB device permits USB charging or power input.
Connector identification
Mini-USB is a distinct, older USB connector
Mini-USB Type-B has a larger, trapezoid-like shell compared with Micro-USB. It is also different from the reversible oval USB-C connector and from the square USB Type-B connector used by many printers. A product category or device brand is not enough to confirm fit—compare the physical port and manual.
The USB-A plug is the familiar rectangular host-side connector. It is not reversible, so align both plugs with their sockets and insert them gently without twisting.
- Look for “Mini-USB”, “Mini-B” or “5-pin Mini USB” in the device manual.
- Compare the port opening with the close-up listing image before purchase.
- Do not assume that every older camera, controller or GPS uses the same connector.
Length-specific usability
Three metres of reach requires careful cable routing
The long variant is useful when a Mini-USB device is mounted away from the computer or charger. Plan the complete path, secure it without crushing and keep spare cable in a broad loop so it does not become a trip or snag hazard.
Cable length affects placement and handling, not the USB protocol. Keep the lead relaxed, protect both strain-relief points and avoid leaving unused cable where it can be pulled, trapped or tightly coiled.
- Useful for distant dash cameras, GPS units, mounted cameras or controllers.
- Longer routing makes strain relief, trip safety and cable support more important.
- For charging, use a suitable source and recognise that the device may accept less than the published maximum.
Real-world applications
Use scenarios
Useful situations for the 3m version
Mounted or distant device
Reach a Mini-USB dash camera, GPS unit or camera located several metres from the USB-A source.
Room or equipment-rack route
Connect a legacy Mini-USB device to a computer or powered hub when short leads cannot reach.
Camera or media transfer
Move photos, recordings or device data when the equipment supports USB data over its Mini-USB port and the correct driver or storage mode is selected.
Legacy accessory power
Provide ordinary USB power to a compatible Mini-USB accessory from a suitable USB-A source, within the device manufacturer’s requirements.
Device and system fit
Compatible devices and systems
Compatibility is determined by port shape and device function
Common Mini-USB equipment
Selected older digital cameras, GPS receivers, dash cameras, MP3/MP4 players, external-drive enclosures and controllers with a Mini-B 5-pin port.
Computer hosts
Windows, macOS, Linux or other systems with USB-A can use the cable; the connected device may still need its own driver or transfer mode.
Charging sources
USB-A wall chargers, vehicle outlets, hubs and power banks can supply power when the Mini-USB device supports charging from that source.
Not connector-compatible
Micro-USB, USB-C, Mini HDMI, Micro HDMI, Lightning and square printer USB-B ports require different cables.
Important limitations
Check before buying
Check these points before ordering or connecting:
- Confirm the device socket is Mini-USB Type-B 5-pin, not the smaller Micro-USB connector.
- Measure the route and confirm that 3m is the right length without stretching or leaving an unsafe loop.
- Check whether the device uses the Mini-USB port for data, charging, power only or a manufacturer-specific function.
- If data transfer is required, confirm the device supports a normal USB data mode and obtain its official driver or application if needed.
- If charging is required, confirm the permitted input in the device manual; the power source and device determine current and charging speed.
- A USB-C-only computer needs a suitable data-capable USB-C-to-USB-A adapter or a different direct cable.
- A physically similar proprietary port is not automatically compatible even if a Mini-USB plug appears to fit.
Function scope
What this product does
Use this model for the functions listed below.
- Creates a wired connection from one USB-A receptacle to one Mini-USB Type-B 5-pin device port.
- Carries USB 2.0 data up to the mutually supported rate, with a 480Mbps signalling ceiling.
- Carries ordinary USB power for devices designed to charge or operate through Mini-USB.
- Supports older USB 1.1 and USB 1.0 devices at their lower negotiated speeds.
Function boundaries
What this product does not do
These boundaries prevent a connector or headline specification from being mistaken for a different function.
- It does not fit Micro-USB, USB-C, Lightning, Mini HDMI or square USB-B ports.
- It does not convert a charge-only device port into a data connection.
- It does not install the camera, GPS or controller driver required by the operating system.
- It does not guarantee “fast charging”; charging is limited by the source, cable path and device input.
- It is not an OTG host adapter and does not by itself let two peripheral devices communicate.
Setup guidance
Setup and usability guidance
- Identify the USB-A host or charger and the Mini-USB Type-B 5-pin socket on the device.
- Power the device down or place it in standby if its manual recommends that before cable changes.
- Align the Mini-USB plug with the socket and insert it straight; do not rock, twist or force it.
- Connect USB-A to the computer or suitable power source.
- For data, unlock or power on the device and select its required transfer, mass-storage or camera mode.
- Install only the device maker’s official driver or application if the operating system requests one.
- Before unplugging storage or a camera during data transfer, eject it safely or wait until all write activity has stopped.
Good practice
Do and avoid
What to do
- Match the exact Mini-USB port before purchase.
- Keep both connectors supported and the cable free from tension.
- Use the device maker’s approved transfer mode and drivers.
- Eject storage safely before disconnecting a data session.
- Store the cable in a loose loop and keep the contacts dry and clean.
What not to do
- Do not force the Mini-USB plug into Micro-USB or another similar-looking socket.
- Do not pull by the cable or lever the plug sideways in an older device port.
- Do not promise or expect a modern USB-PD or Quick Charge mode.
- Do not disconnect while files are being written or firmware is being updated.
- Do not use a damaged cable, loose connector or contaminated USB port.
Safe operation and troubleshooting
Warnings and limitations
Use it safely and troubleshoot methodically
Safety / limitation 1
Mini-USB and Micro-USB are not interchangeable. Forcing the wrong connector can damage an older, difficult-to-repair device socket.
Safety / limitation 2
The stated 3m length should reach without tension; secure the three-metre route so it cannot be tripped over, snagged or crushed, and expect power delivery to remain device-dependent.
Safety / limitation 3
The 480Mbps figure is a USB 2.0 signalling maximum. Device electronics and storage usually produce a lower observed transfer rate.
Safety / limitation 4
Charging behaviour is set by the USB-A source and Mini-USB device. Stop use if a plug, cable or device becomes unusually hot or intermittent.
Safety / limitation 5
A cable can be electrically compatible while the device still needs a driver, operating mode or manufacturer application for data access.
Verified specifications
Technical specifications
| Brand / SKU | UGREEN 10386 |
|---|---|
| Cable type | USB 2.0 data and charging/power cable |
| Connector A | USB Type-A male |
| Connector B | Mini-USB Type-B male, 5-pin |
| Cable length | 3m |
| Maximum stated data rate | Up to 480Mbps |
| Backward compatibility | USB 1.1 and USB 1.0 at supported lower speeds |
| Charging / power | Supported where the Mini-USB device accepts USB power; actual current is device- and source-dependent |
| Outer material | Black PVC |
| Connector contacts | Gold-plated surfaces |
| Direction for data | USB host at Type-A side to compatible Mini-USB peripheral |
| EAN / barcode | 6957303813865 |
In the box
Package contents
- 1 × UGREEN 10386 USB-A to Mini-USB Type-B 5-pin cable, 3m.
No USB charger, OTG adapter, USB-C adapter, driver disc or connected device is specified as included.
Helpful answers
Product-specific FAQ
Is this the same as Micro-USB?
No. Mini-USB Type-B is larger and has a different shape. Compare the device port with the product image; a Micro-USB device needs a different cable.
How long is SKU 10386?
This exact listing is 3m. Use it when the endpoints are separated; route and secure unused length in a broad loop.
What is the maximum data rate?
The cable supports USB 2.0 signalling up to 480Mbps. Actual transfer speed depends on the host, device, storage and software.
Can it charge my device?
It can carry USB power when the Mini-USB device supports charging or power input. The source and device determine the accepted current and time.
Does it support USB Power Delivery or Quick Charge?
No such modern fast-charge mode is specified. Treat it as an ordinary USB 2.0 Mini-USB data and power cable.
Will it work with every camera or GPS?
No. Only models with a standard Mini-USB Type-B 5-pin port and the required USB function are compatible. Verify the device manual.
Does the cable need a driver?
The cable itself does not. A camera, GPS receiver, controller or other peripheral may need its manufacturer’s driver or application.
Can I use it from a USB-C laptop?
Not directly. Use a suitable data-capable USB-C-to-USB-A adapter, or choose a direct USB-C-to-Mini-USB cable approved for the device.
Can it be used for firmware updates?
Only if the device manufacturer specifies standard USB Mini-B for that update. Maintain stable power and do not disconnect during the process.
Why does the device charge but not appear on my computer?
The device may use a charge-only mode, require unlocking, a transfer setting, an official driver or a different USB port. Check its manual.
What comes in the package?
One UGREEN 10386 USB-A to Mini-USB Type-B 5-pin cable in the listed 3m length. No charger or adapter is specified.
