Exact connector
USB-A male host/charger end → Mini-USB Type-B 5-pin male device end
यूग्रीन इंडिया में आपका स्वागत है
हम लायन ग्लोबल और इंडियन पैंथर के अलावा अन्य अमेज़न विक्रेताओं के लिए वारंटी का समर्थन नहीं करते हैं
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Official Store • 2 Year Direct Warranty • GST invoice
Works well but super pricey.
Working as expected at 2k 180hz, received legitimate quality product.
It has good quality material
Top notch quality. Matches the colour of my MacBook Pro too
Good quality and beautiful
This exact 1.5 m US132 cable links a standard USB-A host or USB charger to an older device with a 5-pin Mini-USB Type-B socket. It is a passive USB 2.0 data-and-power cable rated up to 480Mbps and up to 5V/2A when the source and device allow it. It does not convert protocols, boost a signal or modernize a Mini-B device.

USB-A male host/charger end → Mini-USB Type-B 5-pin male device end
1.5 m; measure the routed path and allow a gentle service loop.
Up to 480Mbps USB 2.0; backward operation at USB 1.1/1.0 rates where supported; not USB 3.x or USB4.
Up to 5V/2A where the USB source and Mini-B device both permit it; no USB PD or guaranteed QC protocol
Selection rule: match the device socket, host plug, length, data need and charging requirement. Mini-B and Micro-B are not interchangeable.
Passive male-to-male cable; no repeater and no auxiliary-power input
Up to 480Mbps USB 2.0; backward operation at USB 1.1/1.0 rates where supported
Up to 5V/2A where the USB source and Mini-B device both permit it; no USB PD or guaranteed QC protocol
Black PVC jacket, approximately 4mm outer diameter; 24/28 AWG tin-plated copper conductors; foil/braid shielding; gold-plated contacts (official US132 sources)
Sync photos or files from a Mini-B camera or storage device after confirming its USB mode
Power or communicate with a GPS, dash camera, audio recorder or MP3 player that explicitly uses 5-pin Mini-B
Connect a compatible older controller or accessory to a computer or charger without using an adapter
Replace a lost Mini-B lead with the exact 1.5 m length after checking the device manual and port outline
A matching plug is necessary but not sufficient; the peripheral must implement the requested function.

Use it with a computer, powered hub or charger that has USB-A and a peripheral whose manual or port shape confirms 5-pin Mini-B. Windows, macOS, Linux and ChromeOS can use standard USB device classes; the cable needs no driver, but the camera, controller, GPS, audio recorder, storage device or other peripheral may require its own software. A USB 3.x Type-A host is normally backward-compatible, but this link remains USB 2.0.
USB-A male host/charger end
Mini-USB Type-B 5-pin male device end
The cable has none. A camera, controller, GPS or other device can still need its own driver, firmware or app.
Check whether the device port supports data, charging or both; some legacy ports are service- or power-only.
Use the exact SKU, length, connector images and device manual—not only a marketplace device list.
Measure around obstacles and leave slack without excess cable.
Grip the molded housing, support cable weight and replace a lead that no longer fits firmly.
The cable has no external-power socket. Power comes from the USB-A host, hub or charger and is governed by that source plus the Mini-B device. A device may support data only, charging only, both functions, or a proprietary operating mode. For a power-sensitive 3m run, test under sustained use and prefer the device maker’s own supply when available.
Mini-B, Micro-B, USB-C and HDMI plugs differ. Stop if alignment or insertion resistance is wrong.
This is not a host-to-host bridge; two powered host ports can risk damage.
No supported daisy-chain count is published; extra junctions reduce signal and power margin.
Older listing examples such as GoPro generations, game controllers, GPS units and cameras are historical categories—not blanket certification. Port revisions can change within one model name. Confirm the actual 5-pin Mini-B socket, the device manual and any vendor limits before purchase.
Speed: 480Mbps is the USB 2.0 signalling ceiling, not guaranteed file-copy throughput.
Charging: Up to 5V/2A where the USB source and Mini-B device both permit it; no USB PD or guaranteed QC protocol
Roles: use the documented host/charger-to-peripheral arrangement; this is not OTG or a peer bridge.
No native display video: no HDMI, DisplayPort or USB-C Alt Mode.
Condition: replace bent, loose, corroded, wet, frayed or unusually hot connections.
Confirm the exact Mini-B or Micro-B port; the plug must align without force.
Test direct with its known-good cable and enable the correct USB/data mode.
Remove hubs and adapters; try another suitable host port or approved charger.
Test detection, transfer and charging individually; inspect for wear, debris or movement.
| Brand / SKU | UGREEN 10385 |
|---|---|
| Model / family | US132 |
| Exact cable length | 1.5 m |
| Connector direction | USB-A male host/charger end → Mini-USB Type-B 5-pin male device end |
| Cable topology | Passive male-to-male cable; no repeater and no auxiliary-power input |
| USB generation | USB 2.0 |
| Maximum listed data rate | 480Mbps |
| Charging support | Up to 5V/2A where the USB source and Mini-B device both permit it; no USB PD or guaranteed QC protocol |
| External / auxiliary power | None; power is carried from the connected USB source |
| Native video / Alt Mode | Not supported |
| Audio / Ethernet conversion | Not supported |
| Construction | Black PVC jacket, approximately 4mm outer diameter; 24/28 AWG tin-plated copper conductors; foil/braid shielding; gold-plated contacts (official US132 sources) |
| Driver requirement | No cable driver; connected-device requirements still apply |
| Chaining | No supported chain count published; use one suitable cable |
| Listed dimensions | 19.5 × 13.5 × 1 cm |
| Listed weight | 100 g |
| Verified Shopify status | ACTIVE at research time |
Dimensions and weight reproduce exact listing values where reliable and may describe the packed commerce record rather than installation geometry. Malformed or contradictory values are labelled instead of inferred.

Exact identity: SKU 10385, US132, 1.5 m. Similar cables can use another connector, jacket or charging profile.
Only exact-record media was selected; misleading family artwork was excluded.
1 × UGREEN 10385 1.5 m USB-A male to 5-pin Mini-B male cable. Charger, hub, power adapter, Mini-B device and connector adapters are not included.
Passive. There is no repeater chipset and no external or auxiliary power input. It simply carries the USB 2.0 signal and bus power between the USB-A host/charger end and the Mini-B peripheral end.
No. This uses the thicker trapezoidal 5-pin Mini-B plug. Micro-USB is flatter, USB-C is reversible, and full-size USB-B is the larger square printer-style connector. Compare the device port before ordering.
Up to 480Mbps under USB 2.0. Actual file-transfer speed is lower and depends on the device controller, storage, host, software and protocol overhead. A USB 3.x host port does not make this cable faster.
Official US132 sources list up to 5V/2A. That is a conditional ceiling: the source and Mini-B device decide the real current. Some devices do not charge from a computer port or require a device-specific charging state.
No USB Power Delivery or defined QC profile is guaranteed. “Fast charging” in legacy listing language means the cable can carry the documented current when the source and device allow it; it does not add a negotiation protocol.
Only if the exact camera revision has a 5-pin Mini-B USB port and its manual permits the intended data or charging use. Cameras with Micro-USB, USB-C, proprietary multi-connectors or Mini/Micro HDMI need a different cable.
No. Those are older merchandising examples, not current certification for every generation or regional revision. Check the physical socket and the manufacturer’s present support guidance for your exact device.
Usually for backward-compatible USB 2.0 operation. The connection remains limited to 480Mbps, and the host must still provide a working USB data/power function. Port colour by itself is not a complete specification.
Do not connect two USB hosts. This is wired for a USB-A host/charger on one end and a Mini-B peripheral on the other; it is not a bridge cable or a peer-to-peer transfer controller.
No supported chain count is published. Every extra junction adds voltage drop and signal loss. Use one shortest suitable cable and test the exact device instead of planning a chain.
Verify the port is Mini-B, test the device with its known-good original cable, try another host port, select the camera/device USB mode, remove hubs and adapters, inspect for debris or looseness, and test charging separately from data.
Match SKU 10385, 1.5 m, both connectors, USB 2.0 data and the device’s charging rules. If one differs, choose another exact cable.
GST Invoice available, just mail back with details to order confirmation mail.
GST Invoice, Warranty, authenticity, faster support
This exact 1.5 m US132 cable links a standard USB-A host or USB charger to an older device with a 5-pin Mini-USB Type-B socket. It is a passive USB 2.0 data-and-power cable rated up to 480Mbps and up to 5V/2A when the source and device allow it. It does not convert protocols, boost a signal or modernize a Mini-B device.

USB-A male host/charger end → Mini-USB Type-B 5-pin male device end
1.5 m; measure the routed path and allow a gentle service loop.
Up to 480Mbps USB 2.0; backward operation at USB 1.1/1.0 rates where supported; not USB 3.x or USB4.
Up to 5V/2A where the USB source and Mini-B device both permit it; no USB PD or guaranteed QC protocol
Selection rule: match the device socket, host plug, length, data need and charging requirement. Mini-B and Micro-B are not interchangeable.
Passive male-to-male cable; no repeater and no auxiliary-power input
Up to 480Mbps USB 2.0; backward operation at USB 1.1/1.0 rates where supported
Up to 5V/2A where the USB source and Mini-B device both permit it; no USB PD or guaranteed QC protocol
Black PVC jacket, approximately 4mm outer diameter; 24/28 AWG tin-plated copper conductors; foil/braid shielding; gold-plated contacts (official US132 sources)
Sync photos or files from a Mini-B camera or storage device after confirming its USB mode
Power or communicate with a GPS, dash camera, audio recorder or MP3 player that explicitly uses 5-pin Mini-B
Connect a compatible older controller or accessory to a computer or charger without using an adapter
Replace a lost Mini-B lead with the exact 1.5 m length after checking the device manual and port outline
A matching plug is necessary but not sufficient; the peripheral must implement the requested function.

Use it with a computer, powered hub or charger that has USB-A and a peripheral whose manual or port shape confirms 5-pin Mini-B. Windows, macOS, Linux and ChromeOS can use standard USB device classes; the cable needs no driver, but the camera, controller, GPS, audio recorder, storage device or other peripheral may require its own software. A USB 3.x Type-A host is normally backward-compatible, but this link remains USB 2.0.
USB-A male host/charger end
Mini-USB Type-B 5-pin male device end
The cable has none. A camera, controller, GPS or other device can still need its own driver, firmware or app.
Check whether the device port supports data, charging or both; some legacy ports are service- or power-only.
Use the exact SKU, length, connector images and device manual—not only a marketplace device list.
Measure around obstacles and leave slack without excess cable.
Grip the molded housing, support cable weight and replace a lead that no longer fits firmly.
The cable has no external-power socket. Power comes from the USB-A host, hub or charger and is governed by that source plus the Mini-B device. A device may support data only, charging only, both functions, or a proprietary operating mode. For a power-sensitive 3m run, test under sustained use and prefer the device maker’s own supply when available.
Mini-B, Micro-B, USB-C and HDMI plugs differ. Stop if alignment or insertion resistance is wrong.
This is not a host-to-host bridge; two powered host ports can risk damage.
No supported daisy-chain count is published; extra junctions reduce signal and power margin.
Older listing examples such as GoPro generations, game controllers, GPS units and cameras are historical categories—not blanket certification. Port revisions can change within one model name. Confirm the actual 5-pin Mini-B socket, the device manual and any vendor limits before purchase.
Speed: 480Mbps is the USB 2.0 signalling ceiling, not guaranteed file-copy throughput.
Charging: Up to 5V/2A where the USB source and Mini-B device both permit it; no USB PD or guaranteed QC protocol
Roles: use the documented host/charger-to-peripheral arrangement; this is not OTG or a peer bridge.
No native display video: no HDMI, DisplayPort or USB-C Alt Mode.
Condition: replace bent, loose, corroded, wet, frayed or unusually hot connections.
Confirm the exact Mini-B or Micro-B port; the plug must align without force.
Test direct with its known-good cable and enable the correct USB/data mode.
Remove hubs and adapters; try another suitable host port or approved charger.
Test detection, transfer and charging individually; inspect for wear, debris or movement.
| Brand / SKU | UGREEN 10385 |
|---|---|
| Model / family | US132 |
| Exact cable length | 1.5 m |
| Connector direction | USB-A male host/charger end → Mini-USB Type-B 5-pin male device end |
| Cable topology | Passive male-to-male cable; no repeater and no auxiliary-power input |
| USB generation | USB 2.0 |
| Maximum listed data rate | 480Mbps |
| Charging support | Up to 5V/2A where the USB source and Mini-B device both permit it; no USB PD or guaranteed QC protocol |
| External / auxiliary power | None; power is carried from the connected USB source |
| Native video / Alt Mode | Not supported |
| Audio / Ethernet conversion | Not supported |
| Construction | Black PVC jacket, approximately 4mm outer diameter; 24/28 AWG tin-plated copper conductors; foil/braid shielding; gold-plated contacts (official US132 sources) |
| Driver requirement | No cable driver; connected-device requirements still apply |
| Chaining | No supported chain count published; use one suitable cable |
| Listed dimensions | 19.5 × 13.5 × 1 cm |
| Listed weight | 100 g |
| Verified Shopify status | ACTIVE at research time |
Dimensions and weight reproduce exact listing values where reliable and may describe the packed commerce record rather than installation geometry. Malformed or contradictory values are labelled instead of inferred.

Exact identity: SKU 10385, US132, 1.5 m. Similar cables can use another connector, jacket or charging profile.
Only exact-record media was selected; misleading family artwork was excluded.
1 × UGREEN 10385 1.5 m USB-A male to 5-pin Mini-B male cable. Charger, hub, power adapter, Mini-B device and connector adapters are not included.
Passive. There is no repeater chipset and no external or auxiliary power input. It simply carries the USB 2.0 signal and bus power between the USB-A host/charger end and the Mini-B peripheral end.
No. This uses the thicker trapezoidal 5-pin Mini-B plug. Micro-USB is flatter, USB-C is reversible, and full-size USB-B is the larger square printer-style connector. Compare the device port before ordering.
Up to 480Mbps under USB 2.0. Actual file-transfer speed is lower and depends on the device controller, storage, host, software and protocol overhead. A USB 3.x host port does not make this cable faster.
Official US132 sources list up to 5V/2A. That is a conditional ceiling: the source and Mini-B device decide the real current. Some devices do not charge from a computer port or require a device-specific charging state.
No USB Power Delivery or defined QC profile is guaranteed. “Fast charging” in legacy listing language means the cable can carry the documented current when the source and device allow it; it does not add a negotiation protocol.
Only if the exact camera revision has a 5-pin Mini-B USB port and its manual permits the intended data or charging use. Cameras with Micro-USB, USB-C, proprietary multi-connectors or Mini/Micro HDMI need a different cable.
No. Those are older merchandising examples, not current certification for every generation or regional revision. Check the physical socket and the manufacturer’s present support guidance for your exact device.
Usually for backward-compatible USB 2.0 operation. The connection remains limited to 480Mbps, and the host must still provide a working USB data/power function. Port colour by itself is not a complete specification.
Do not connect two USB hosts. This is wired for a USB-A host/charger on one end and a Mini-B peripheral on the other; it is not a bridge cable or a peer-to-peer transfer controller.
No supported chain count is published. Every extra junction adds voltage drop and signal loss. Use one shortest suitable cable and test the exact device instead of planning a chain.
Verify the port is Mini-B, test the device with its known-good original cable, try another host port, select the camera/device USB mode, remove hubs and adapters, inspect for debris or looseness, and test charging separately from data.
Match SKU 10385, 1.5 m, both connectors, USB 2.0 data and the device’s charging rules. If one differs, choose another exact cable.
हमारे सहायता केंद्र पर जाएँ
विशेषज्ञ सहायता एवं सलाह
अपने ऑर्डर की स्थिति जांचें
अपडेट और ट्रैकिंग
रिटर्न और एक्सचेंज
तुम्हें सिर्फ ज्ञान की आवश्यकता है
मूल्य-मिलान की गारंटी
आपसे हमारा वादा