Quality is good Plug n Play Works fine for Asus Rampage IV Black edition Motherboard as boot drive with WD 1 TB NVME Speed is 4700 Mbps Read N Write 3820 Mbps Fantastic Adapter Reviw it after 6 moth about durability
The UGREEN VGA Cable (11631) connects a PC, laptop or set-top box with a VGA port to a monitor or projector at up to 1920×1200 / 1080p. Triple shielding keeps the picture free of ghosting and flicker, ideal for offices, classrooms and CCTV DVRs.
1080pup to 1920×1200
HD15male to male
Tripleshielded
3mcable length
UGREEN VGA Cable key features
1080p video From VGA to VGA.
Video only Use a separate audio cable.
Triple shielding No ghosting or interference.
Plug and play No driver needed.
Shielded Stable, flicker-free picture.
Mirror or extend Duplicate or add a second screen.
UGREEN VGA Cable highlights
Built to last
Shielded cable and solid connectors for a stable picture.
Usage scenarios for the UGREEN VGA Cable
Second screen at work
Mirror or extend your desktop onto a bigger display.
You get
Result
Mirror and extend
Yes
Resolution
1080p
Length
3m
Use: VGA end into the computer, VGA end into the display.
Films and presentations
Share a screen on a TV or projector.
You get
Result
Video
1080p
Audio
Separate cable needed
Length
3m
Use: Select the right input on the display.
UGREEN VGA Cable compatibility
Device
Status
What to expect
PCs and laptops with VGA
Compatible
Analogue video
Monitors and projectors with VGA
Compatible
Up to 1080p
CCTV DVRs
Compatible
VGA out
HDMI-only devices
Not supported
Needs an HDMI to VGA converter
Works with
PC or laptop with VGA output
older VGA monitor or projector
Won't work with
Sources without the right output
Audio
UGREEN 11631 3m VGA Cable (HD15 Male to Male) specifications
Model
UGREEN 11631
Length
3m
Connectors
VGA male to VGA male
Resolution
1080p
Audio
No
Direction
Passive
What's in the box
UGREEN 3m VGA Cable (HD15 Male to Male) (11631)
Devices not included.
Good to know
Video only. VGA carries video, not sound. Use a 3.5mm audio cable for speakers.
Tighten both thumbscrews for a steady picture.
UGREEN VGA Cable FAQs
Can I use it the other way, VGA to VGA?
Check the specification above; it works as listed.
Does it carry audio?
No. Use a separate audio cable.
What resolution does it support?
Up to 1080p, if both devices support it.
Does it need a driver?
No.
How long is it?
3m.
Genuine UGREEN, imported and sold by Sophus Technosol Pvt Ltd, the authorised national distributor. GST invoice with every order. 2-year India warranty.
The UGREEN VGA Cable (11631) connects a PC, laptop or set-top box with a VGA port to a monitor or projector at up to 1920×1200 / 1080p. Triple shielding keeps the picture free of ghosting and flicker, ideal for offices, classrooms and CCTV DVRs.
1080pup to 1920×1200
HD15male to male
Tripleshielded
3mcable length
UGREEN VGA Cable key features
1080p video From VGA to VGA.
Video only Use a separate audio cable.
Triple shielding No ghosting or interference.
Plug and play No driver needed.
Shielded Stable, flicker-free picture.
Mirror or extend Duplicate or add a second screen.
UGREEN VGA Cable highlights
Built to last
Shielded cable and solid connectors for a stable picture.
Usage scenarios for the UGREEN VGA Cable
Second screen at work
Mirror or extend your desktop onto a bigger display.
You get
Result
Mirror and extend
Yes
Resolution
1080p
Length
3m
Use: VGA end into the computer, VGA end into the display.
Films and presentations
Share a screen on a TV or projector.
You get
Result
Video
1080p
Audio
Separate cable needed
Length
3m
Use: Select the right input on the display.
UGREEN VGA Cable compatibility
Device
Status
What to expect
PCs and laptops with VGA
Compatible
Analogue video
Monitors and projectors with VGA
Compatible
Up to 1080p
CCTV DVRs
Compatible
VGA out
HDMI-only devices
Not supported
Needs an HDMI to VGA converter
Works with
PC or laptop with VGA output
older VGA monitor or projector
Won't work with
Sources without the right output
Audio
UGREEN 11631 3m VGA Cable (HD15 Male to Male) specifications
Model
UGREEN 11631
Length
3m
Connectors
VGA male to VGA male
Resolution
1080p
Audio
No
Direction
Passive
What's in the box
UGREEN 3m VGA Cable (HD15 Male to Male) (11631)
Devices not included.
Good to know
Video only. VGA carries video, not sound. Use a 3.5mm audio cable for speakers.
Tighten both thumbscrews for a steady picture.
UGREEN VGA Cable FAQs
Can I use it the other way, VGA to VGA?
Check the specification above; it works as listed.
Does it carry audio?
No. Use a separate audio cable.
What resolution does it support?
Up to 1080p, if both devices support it.
Does it need a driver?
No.
How long is it?
3m.
Genuine UGREEN, imported and sold by Sophus Technosol Pvt Ltd, the authorised national distributor. GST invoice with every order. 2-year India warranty.
GST Invoice available, just mail back with details to order confirmation mail.
Buy direct from official UGREEN India
GST Invoice, Warranty, authenticity, faster support
आपका कार्ट
UGREEN
UGREEN 3m VGA/HD15 Male-to-Male Cable (11631)
विक्रय कीमतRs. 1,319.00
नियमित रूप से मूल्यRs. 2,599.00
यूनिट मूल्य
Product overview
Overview
UGREEN 11631 is a 3m passive VGA/HD15 male-to-male cable for carrying analogue video from a VGA-equipped computer or source to a VGA-input monitor, television or projector. Both plugs have 15 pins, thumbscrews and ferrite suppression. The record lists modes through 1920 × 1200 and 1080p. Audio requires a separate connection.
Features
What it does well.
Key features
Product highlights
3m. Format and length for planning the physical connection.
VGA analogue video. Product capability, subject to the complete source-to-display path.
Up to 1920 × 1200 / 1080p. The defining connector, protocol or construction detail for this SKU.
One clear job. Creates one passive 3m analogue VGA/HD15 video link.
No hidden upgrade. It does not carry audio; use a separate supported audio path.
Maximum versus actual: Listed up to 1920 × 1200 and 1080p; actual refresh and clarity depend on the analogue source, display and 3m route. Analogue VGA quality depends on the source timing and DAC, cable route, connector condition and display input. A resolution label does not guarantee a particular refresh rate, image sharpness or gaming frame rate.
Choose the right connection
Port and direction check
2 × VGA/HD15 15-pin male plugs on a passive 3m cable
The cable itself has identical connectors and carries the analogue signal between either physical end, but the device roles remain VGA output at the source and VGA input at the display. It is not a 9-pin DB9/RS-232 serial cable.
Inspect port labels and connector shapes under good light before routing. Mini HDMI, Micro HDMI, Mini DisplayPort, full-size DisplayPort, USB-C, VGA and full-size HDMI are distinct interfaces even when two connectors appear similar at a glance.
Connection rule: never force a plug and never assume an adapter works in reverse or adds a display mode, audio format or protocol that the endpoints lack.
Display modes and performance
Resolution, refresh and signal
Listed up to 1920 × 1200 and 1080p; actual refresh and clarity depend on the analogue source, display and 3m route. Analogue VGA quality depends on the source timing and DAC, cable route, connector condition and display input. A resolution label does not guarantee a particular refresh rate, image sharpness or gaming frame rate.
A maximum resolution or refresh rate is not forced by the product. The source GPU, source port, adapter or cable, receiving input and every intermediate device must negotiate a mode they all support.
When a high mode fails, establish a stable direct connection at a conservative timing, then raise one setting at a time while checking picture, colour and audio.
Use scenarios
Where it fits
3m desktop-to-monitor route. Connect a VGA computer output to a VGA-input monitor across the 3m length.
Projector presentation. Carry analogue video to a meeting-room or classroom projector and route audio separately.
Extended desktop. Connect a second VGA screen and choose extended mode in the computer display settings.
Mirrored screen. Duplicate the source image on a compatible VGA television or projector.
Legacy equipment bench. Use between known-good VGA output and input devices when testing older computer hardware.
Analogue display replacement. Reconnect an existing VGA workflow while preserving the length and screw-secured plugs.
Scenario boundary: every example assumes the actual source output, signal direction, receiving input, graphics hardware and operating system support the requested use.
Setup and usability guidance
A reliable first connection
Follow a controlled sequence so connector, direction, display-mode and audio faults remain easy to isolate.
After setup: record the working input, resolution, refresh and audio route before adding more adapters, joins or switching equipment.
Confirm both ports are 15-pin VGA/HD15 and that one is a source output while the other is a display input.
Inspect all pins before insertion; straighten no bent pin while the cable is connected.
Insert one plug squarely into the source and tighten both thumbscrews evenly by hand.
Connect the other plug to the display, tighten its thumbscrews and support the cable weight.
Select VGA or PC input on the display and begin at a conservative common resolution.
Use the display auto-adjust function where available and then choose mirror or extended mode.
Connect a separate audio lead if sound is required and retest after any cable-route change.
Compatible devices and systems
Compatibility explained
Required source side.
Required display side.
System behaviour.
Important boundaries.
VGA/HD15 15-pin female analogue-video output on a computer or source
The source port must provide video output, not merely share a similar connector shape
Graphics hardware and system settings must support the requested display mode
VGA/HD15 15-pin female analogue-video input on a monitor, television or projector
The selected display input must be enabled and support the chosen timing
Any separately required cable must be sound and correctly rated
No product-specific application is required for ordinary display use
Mirror and extended-desktop choices are controlled by the source operating system
Resolution, refresh, colour, HDR and audio options depend on the complete signal chain
Not 9-pin DB9/RS-232 serial
No HDMI, DisplayPort, DVI, USB or network conversion
VGA carries analogue video only; audio requires another cable
What this product does
Supported jobs
Use SKU 11631 for these roles.
Each role stays within the product category described above; it does not imply conversion, amplification, routing or software support that is not listed.
Creates one passive 3m analogue VGA/HD15 video link.
Connects matching 15-pin VGA output and VGA input ports.
Carries analogue RGB picture and synchronization signals.
Uses thumbscrews to resist accidental disconnection.
Uses shielding and ferrite suppression described for this SKU.
Allows mirror or extended-desktop operation when controlled by the source graphics system.
What this product does not do
Important exclusions
These exclusions prevent the most common wrong-product purchases and unsafe installations.
Choose another product when needed: use the correct directional converter, splitter, switch, capture device, audio route or installation-rated cable for functions outside this model’s role.
It does not carry audio; use a separate supported audio path.
It does not convert HDMI, DisplayPort, DVI, USB or another digital format.
It does not fit or operate as a 9-pin DB9/RS-232 serial cable.
It does not create a new graphics output or split one output into independent displays.
It does not guarantee a particular refresh rate or pixel-perfect image at the maximum listed resolution.
It does not improve a weak source DAC, damaged port or unsupported display timing.
What to do
Best-practice checklist
Protect the connection and make later diagnosis straightforward.
A labelled, supported and tested connection is easier to maintain than one hidden immediately after purchase.
Identify both physical ports and confirm which device is the source before connecting anything.
Start with a conservative display mode, then raise resolution or refresh only after a stable picture is established.
Insert and remove connectors by their housings, keeping the lead free of tension and sharp bends.
Select the intended input on the monitor, television or projector after the cable path is complete.
Test the direct, shortest supported path before adding switches, wall plates, extensions or capture equipment.
Keep the product dry, ventilated and accessible enough to inspect if picture or audio changes.
What not to do
Avoid these mistakes
Most failures come from wrong interfaces, unsupported claims, strain or uncontrolled channel changes.
Stop using the product if a connector, housing, jacket or lead is cracked, loose, contaminated, unusually hot or exposes conductive parts.
Do not force a connector into a similar-looking port or use a direction opposite to the one stated for this model.
Do not pull, kink, crush, staple or allow the cable or adapter to hang by either device port.
Do not assume the maximum printed mode will work through an older source, display, cable or intermediate device.
Do not hot-plug repeatedly while diagnosing; power-cycle the source and display after reseating the path.
Do not install the product outdoors, underground or permanently inside a wall without the required published rating.
Do not continue using damaged, loose, contaminated or unusually hot connectors or housings.
Warnings and limitations
Read before installation
The following limits remain important even when the connector appears to fit.
Permanent routes: test the complete real setup first and follow local electrical, building and workplace requirements.
A printed maximum is a ceiling, not a forced mode. The source, graphics hardware, adapter or cable, receiving display and every intermediate connection must share the requested resolution and refresh rate.
VGA is analogue video-only. Use a separate audio connection for speakers or projectors.
Inspect all 15 pins before insertion and tighten thumbscrews only by hand.
No conductor gauge is borrowed from the 1.5m or 2m family variants.
The listed resolution ceiling does not establish a guaranteed refresh rate or identical image quality on every analogue path.
No outdoor, direct-burial, in-wall, plenum, LSZH or fire-resistance rating is stated for this product.
Specifications
At a glance.
Connector pair
2 × VGA/HD15 15-pin male with thumbscrews
Cable length
3m
Signal
Analogue RGB video with sync lines
Conductor gauge
Not safely stated for SKU 11631
Signal paths
Three coaxial RGB paths plus sync wiring
Shielding / suppression
Foil and braid shielding with integrated ferrite core(s)
Jacket / contacts
PVC jacket and plated HD15 contact wording
Physical build
Copper conductors, three precision shielded coaxial RGB paths, sync lines, braid and grounding, ferrite core, PVC jacket and plated HD15 connectors
What is in the pack
Included only as stated for this current product record.
Source devices, displays, separately required HDMI, VGA or audio cables, wall plates, switches, receivers and installation hardware are not included unless individually listed above. Inspect the retail package before installation.
FAQs
Questions buyers ask.
What connectors are on both ends?
Two 15-pin VGA/HD15 male plugs with thumbscrews.
Is this a DB9 serial cable?
No. DB9/RS-232 has nine pins and serves a different interface; never force the 15-pin VGA plug into it.
Does the cable carry audio?
No. VGA is analogue video-only, so sound needs a separate cable or supported wireless/USB route.
What is the cable length?
This SKU is 3m; specifications from the 1.5m, 2m and 3m family variants are not interchangeable.
What is the maximum resolution?
Listed up to 1920 × 1200 and 1080p; actual refresh and clarity depend on the analogue source, display and 3m route
Is a refresh rate guaranteed?
No. The record lists resolution ceilings but does not safely guarantee a particular refresh or equal quality on every analogue path.
Can the cable work in either physical orientation?
Yes, the identical passive plugs can be placed at either end, but one connected device still must be a VGA output and the other a VGA input.
Can it convert VGA to HDMI or DisplayPort?
No. It is a passive analogue VGA cable with no digital conversion electronics.
Can it mirror or extend a desktop?
Yes when the source graphics hardware and operating system expose those display choices.
What do the ferrite cores do?
They help suppress high-frequency interference; they cannot repair a damaged cable or unsupported timing.
How tight should the thumbscrews be?
Finger-tight and even on both sides. Overtightening can damage the connector shell or socket.
