
Studio recording
Connect a studio microphone to an interface for vocals, podcasts and voice-overs.
| You get | Result |
|---|---|
| Balanced mic signal | Yes |
| Phantom power | Passes through |
| Length | 2m |
Use: Female end onto the microphone, male end into the interface.


The UGREEN Braided XLR Microphone Cable (20500) is a 2m balanced 3-pin XLR male to female cable with a tough nylon braid and zinc alloy connectors. Multi-layer shielding keeps vocals and instruments clean, and it passes phantom power to condenser microphones. Ideal for home studios, podcasts, streaming and stage.

PE insulation, a cotton layer, copper shield and TPE inner jacket under the nylon braid keep the signal lossless and noise-free.

Solid zinc alloy shells and a locking female connector stand up to stage use and stay firmly connected.

Connect a studio microphone to an interface for vocals, podcasts and voice-overs.
| You get | Result |
|---|---|
| Balanced mic signal | Yes |
| Phantom power | Passes through |
| Length | 2m |
Use: Female end onto the microphone, male end into the interface.

A braided cable that survives being stepped on, coiled and packed after every show.
| You get | Result |
|---|---|
| Mics, mixers, speakers | Yes |
| Nylon braid | Yes |
| Locking connector | Yes |
Use: Coil loosely after use to keep the braid in shape.
| Device | Status | What to expect |
|---|---|---|
| Dynamic and condenser microphones | Compatible | Condensers need phantom power from the mixer or interface |
| Mixers and audio interfaces | Compatible | XLR mic inputs |
| Powered speakers and amplifiers | Compatible | XLR inputs |
| Cameras and recorders with XLR inputs | Compatible | Balanced audio |
| 3.5mm or USB-only devices | Not supported | Needs an interface or a different cable |
| Model | UGREEN 20500 |
|---|---|
| Length | 2m |
| Connectors | 3-pin XLR male, 3-pin XLR female (locking) |
| Signal | Balanced analogue |
| Conductors | Copper |
| Shielding | PE insulation, cotton layer, copper shield, TPE |
| Jacket | Nylon braided |
| Connector shells | Zinc alloy |
| Phantom power | Passes through |
Microphone and mixer are not included.
Plug the female end onto the microphone or source and the male end into the input. Turn the volume down before connecting or disconnecting.
Yes. Switch on phantom power at the mixer or interface; the cable passes it through.
The female end plugs onto the microphone; the male end goes into the mixer or interface.
Yes. Male to female makes it a straight extension.
No. It's for XLR connections only.
Yes. It's a 3-pin balanced XLR cable, which rejects noise over long runs.
Genuine UGREEN, imported and sold by Sophus Technosol Pvt Ltd, the authorised national distributor. GST invoice with every order. 2-year India warranty.

The UGREEN Braided XLR Microphone Cable (20500) is a 2m balanced 3-pin XLR male to female cable with a tough nylon braid and zinc alloy connectors. Multi-layer shielding keeps vocals and instruments clean, and it passes phantom power to condenser microphones. Ideal for home studios, podcasts, streaming and stage.

PE insulation, a cotton layer, copper shield and TPE inner jacket under the nylon braid keep the signal lossless and noise-free.

Solid zinc alloy shells and a locking female connector stand up to stage use and stay firmly connected.

Connect a studio microphone to an interface for vocals, podcasts and voice-overs.
| You get | Result |
|---|---|
| Balanced mic signal | Yes |
| Phantom power | Passes through |
| Length | 2m |
Use: Female end onto the microphone, male end into the interface.

A braided cable that survives being stepped on, coiled and packed after every show.
| You get | Result |
|---|---|
| Mics, mixers, speakers | Yes |
| Nylon braid | Yes |
| Locking connector | Yes |
Use: Coil loosely after use to keep the braid in shape.
| Device | Status | What to expect |
|---|---|---|
| Dynamic and condenser microphones | Compatible | Condensers need phantom power from the mixer or interface |
| Mixers and audio interfaces | Compatible | XLR mic inputs |
| Powered speakers and amplifiers | Compatible | XLR inputs |
| Cameras and recorders with XLR inputs | Compatible | Balanced audio |
| 3.5mm or USB-only devices | Not supported | Needs an interface or a different cable |
| Model | UGREEN 20500 |
|---|---|
| Length | 2m |
| Connectors | 3-pin XLR male, 3-pin XLR female (locking) |
| Signal | Balanced analogue |
| Conductors | Copper |
| Shielding | PE insulation, cotton layer, copper shield, TPE |
| Jacket | Nylon braided |
| Connector shells | Zinc alloy |
| Phantom power | Passes through |
Microphone and mixer are not included.
Plug the female end onto the microphone or source and the male end into the input. Turn the volume down before connecting or disconnecting.
Yes. Switch on phantom power at the mixer or interface; the cable passes it through.
The female end plugs onto the microphone; the male end goes into the mixer or interface.
Yes. Male to female makes it a straight extension.
No. It's for XLR connections only.
Yes. It's a 3-pin balanced XLR cable, which rejects noise over long runs.
Genuine UGREEN, imported and sold by Sophus Technosol Pvt Ltd, the authorised national distributor. GST invoice with every order. 2-year India warranty.
Country of Origin: China
Manufactured by: UGREEN Group Limited
Imported & Marketed by: Sophus Technosol Private Limited, Durga Complex, 2nd Floor, #38/1, 3rd Cross, Sahakarnagar G Block, Bengaluru – 560092, Karnataka, India
Customer care: +91 94038 93363 (phone / WhatsApp) · info@ugreenindia.com · Mon–Sat, 10:30–18:00 IST
GST Invoice available, just mail back with details to order confirmation mail.
GST Invoice, Warranty, authenticity, faster support