Things to consider - iphone does not support LDAC and if your Android does not have LDAC, then it will use AAC because this model does not support APTX codecs. But overall it is a durable and quality product without any extra fuss. Working great!
UGREEN 10422 holds a compatible smartphone on a suitable horizontal vehicle air-vent blade for navigation and hands-free screen positioning. 360° ball joint supports portrait or landscape screen positioning, while spring-loaded side arms open and close around the phone. The verified construction is engineered plastic body, metal-reinforced spring mechanism, aluminium-alloy arm elements and silicone phone/vent contact pads. This guide explains exact fit, setup, stability and safety boundaries so the product is easy to choose and use responsibly.
SKU 10422 visual: Product view: UGREEN LP120 10422 uses spring-loaded side arms and a silicone-lined clip for a suitable vehicle vent.
Key features
Exact holder type
LP120 Air-Vent Holder. holds a compatible smartphone on a suitable horizontal vehicle air-vent blade for navigation and hands-free screen positioning.
Fit boundary
phones approximately 4.7–7.2 inches, about 60–89mm wide and under 11mm total phone-and-case thickness; measure the complete setup before ordering.
Adjustment
360° ball joint supports portrait or landscape screen positioning, while spring-loaded side arms open and close around the phone.
Mounting method
silicone-lined clip for a firm, undamaged, straight horizontal vent blade up to approximately 4.5mm thick; exact media rejects vertical and round/turbine vents.
SKU 10422 visual: Spring grip: both side arms must engage the phone evenly before the vehicle moves.
Measure before ordering
Phone and tablet names are only examples. Physical compatibility is controlled by screen and body size, total thickness, weight, case shape, camera bump, accessories and the way the device meets the support points.
Measure the complete setup
phones approximately 4.7–7.2 inches, about 60–89mm wide and under 11mm total phone-and-case thickness; measure the complete setup before ordering. Screen size alone does not describe case thickness, camera bump, grip accessories or total weight.
Check the support points
Both lower hooks and the padded back surface must contact the device securely. Remove a wallet, ring, battery case or pop-out grip if it interferes.
Choose a stable position
Choose a firm horizontal blade, fit the clip fully and angle the screen while parked. Confirm the mount does not obstruct the road, mirrors, instruments, controls or too much airflow.
Test before normal use
Gently tap the screen and check every hinge, clamp, base, adhesive bond or vent clip. Stop if the device creeps, tips, releases or makes the mounting surface flex.
Adjustment and viewing guide
Verified mechanism: 360° ball joint supports portrait or landscape screen positioning, while spring-loaded side arms open and close around the phone.
Adjust unloaded whenever practical. Support the device with one hand, move the mechanism with the other and stop at its natural limit. A firm hinge is normal; forcing it can damage the joint or make the base slip.
Stability principle: raising, extending or moving a device forward increases leverage. Heavier devices should stay lower, closer to the base or clamp, and slightly tilted back.
SKU 10422 visual: Screen orientation: the 360° ball joint supports portrait or landscape positioning after the vent clip is fully seated.
Use scenarios
Navigation
Position the screen for glanceable navigation without blocking the road, instruments, mirrors or controls.
Hands-free calls
Use the vehicle audio system or a headset as permitted; the holder itself has no microphone or electronics.
Passenger use
A passenger can rotate the screen when the mount and vent remain stable.
Wired charging
The open lower edge may accept a compatible cable; secure it so it cannot catch on controls.
SKU 10422 visual: Navigation setup: place the holder where it does not obstruct controls, road visibility or the entire airflow path.
Setup and usability guidance
Step 1: Park the vehicle safely and inspect the vent shape, blade direction, thickness and condition.
Step 2: Push the padded clip fully onto one suitable horizontal blade without twisting or forcing it.
Step 3: Open the spring arms, centre the compatible phone and release them evenly.
Step 4: Set portrait or landscape angle through the ball joint while the vehicle remains parked.
Step 5: Gently test the phone grip and vent clip before driving.
Step 6: Recheck after temperature changes or rough roads and remove the mount if the vent loosens or bends.
Best practice: Choose a firm horizontal blade, fit the clip fully and angle the screen while parked. Confirm the mount does not obstruct the road, mirrors, instruments, controls or too much airflow.
SKU 10422 visual: One-hand insertion is shown, but installation, removal and adjustment should be completed only while the vehicle is parked.
Mounting surface, stability and environment
Exact mounting method: silicone-lined clip for a firm, undamaged, straight horizontal vent blade up to approximately 4.5mm thick; exact media rejects vertical and round/turbine vents.
Flat and clean contact
Dust, oil, grit and moisture reduce friction and can scratch surfaces. Clean and dry every contact area before installation.
Keep away from edges
Position the loaded device where a slip or release will not send it onto a person, floor, sink, cooker, keyboard or glass object.
Touch gently
Use lighter taps or support the device for typing, drawing and gaming. A holder designed for viewing is not always a rigid typing platform.
Recheck regularly
Temperature, vibration, repeated adjustment and normal wear can change grip. Inspect the mount, pads and device position before each important use.
SKU 10422 visual: Vent boundary: the exact artwork supports straight horizontal blades up to about 4.5mm and rejects round or vertical layouts.
Compatible devices and systems
Verified physical class: phones approximately 4.7–7.2 inches, about 60–89mm wide and under 11mm total phone-and-case thickness; measure the complete setup before ordering.
Apple devices
Compatible iPhone or iPad examples may fit only when their complete size, weight and case remain within the stated physical limits.
Android devices
Samsung Galaxy, Google Pixel, OnePlus, Xiaomi, Redmi, realme and other phones/tablets are assessed by measurements—not brand alone.
E-readers and handhelds
A Kindle, e-reader, Switch or similar device may fit only if all support points engage and the complete device stays inside every size and load limit.
Case caveat
A protective case can increase thickness, move the centre of gravity and cover the charging opening. Measure it installed, not separately.
SKU 10422 visual: Phone fit: the exact artwork lists approximately 4.7–7.2-inch devices with a supported width of about 60–89mm.
What this product does
Holds a compatible smartphone on a suitable horizontal vehicle air-vent blade for navigation and hands-free screen positioning.
Uses the documented lp120 air-vent holder mechanism for hands-free physical support.
Provides the verified adjustment: 360° ball joint supports portrait or landscape screen positioning, while spring-loaded side arms open and close around the phone.
Uses the verified mounting method: silicone-lined clip for a firm, undamaged, straight horizontal vent blade up to approximately 4.5mm thick; exact media rejects vertical and round/turbine vents.
Protects covered contact areas with the specified silicone, rubber or soft pads; these reduce—not eliminate—the possibility of marks.
What this product does not do
not for vertical, round, turbine, curved, retractable, loose or fragile vents; no charging electronics, magnet, suction cup or dashboard adhesive is included.
It does not include MagSafe, wireless charging, a battery, powered USB port or motor unless explicitly stated—which this SKU does not.
It does not make every phone case, tablet, furniture edge, wall finish, air vent or vehicle compatible.
It does not guarantee zero wobble during touch, typing, drawing, rough roads or fully extended use.
It is not safety equipment and should not suspend a device where release could cause injury or serious damage.
What to do
Measure first
Check the complete device and case against every stated size, thickness, opening and load limit.
Adjust with two hands
Support the device or unload the holder before moving a firm hinge, rail, spring arm, clamp or rotating base.
Route cables safely
Leave slack at the connector, avoid sharp bends and keep cables away from hinges, springs, vehicle controls and walking paths.
Inspect the setup
Check screws, pads, clips, clamps, adhesive edges and device seating before use and after relocation or temperature change.
What not to do
Do not exceed limits
Do not guess load capacity, case fit, clamp thickness, vent compatibility or adhesive reuse beyond the exact values stated here.
Do not force movement
Stop when a hinge, clamp or rail reaches its natural limit. Do not use tools for extra leverage unless the supplied assembly step requires them.
Do not use near hazards
Avoid flames, hot cookware, wet areas, unstable shelves, traffic controls and positions directly above people or breakables.
Do not trust a partial grip
Both device and mount must be fully seated. A phone caught by one hook, a clamp on a rounded edge or a clip halfway onto a vent is unsafe.
Warnings and limitations
Vehicle safety: install, insert, remove and adjust only while parked. Extreme cabin heat/cold and weak vent blades can reduce retention. The driver remains responsible for legal, unobstructed placement.
Pinch points: keep fingers, hair, cables and loose clothing clear of hinges, springs, telescopic rails and clamp mechanisms.
Heat and moisture: keep the holder and device away from flames, hot cookware, direct heaters, steam, sinks, rain and pooled liquid.
Children and pets: this is not a toy. Keep small hardware and loaded devices out of reach and avoid trailing cables.
Inspection: stop using the product if a hinge loosens, pad detaches, plastic cracks, metal bends, adhesive lifts, clamp slips or vent blade deforms.
Technical specifications
Brand / SKU
UGREEN 10422
Model / type
LP120 Air-Vent Holder
Colour
Black / silver
Primary use
holds a compatible smartphone on a suitable horizontal vehicle air-vent blade for navigation and hands-free screen positioning
Device fit
phones approximately 4.7–7.2 inches, about 60–89mm wide and under 11mm total phone-and-case thickness; measure the complete setup before ordering
Adjustment
360° ball joint supports portrait or landscape screen positioning, while spring-loaded side arms open and close around the phone
Mounting method
silicone-lined clip for a firm, undamaged, straight horizontal vent blade up to approximately 4.5mm thick; exact media rejects vertical and round/turbine vents
Materials
engineered plastic body, metal-reinforced spring mechanism, aluminium-alloy arm elements and silicone phone/vent contact pads
Supported screen range
Approximately 4.7–7.2in
Compatible phone width
Approximately 60–89mm
Maximum phone + case thickness
Less than 11mm
Vent requirement
Straight horizontal blade
Maximum blade thickness
Approximately 4.5mm
Adjustment
360° ball joint
Charging / electronics
None; passive mechanical holder
Package contents
1 × UGREEN LP120 / 10422 air-vent car phone holder
SKU 10422 visual: Mechanical construction: the passive holder uses a spring cradle and contains no magnet, charging electronics or battery.
Package contents
Exact-SKU reconciliation: Exact live media confirms the 4.7–7.2-inch phone range, 4.5mm vent-blade ceiling, horizontal-only fit and 360° joint. The copy rejects vertical, round and turbine vents instead of describing the mount as universally vehicle-compatible.
Primary sources: exact live UGREEN India product record and images for SKU 10422 plus official regional UGREEN exact-SKU material.
Image policy: only the exact live product images listed in this draft are used. Generic family claims that conflict with dimensions, mechanism or fit are excluded.
Troubleshooting
Device tips forward
Lower the height or arm, tilt the device back, centre it over the support and remove a heavy case/accessory. Stop if the stated fit or load limit is exceeded.
Holder slides or rotates
Unload it, clean and dry contact pads, retighten only as instructed and move to a firmer, flatter mounting point.
Case will not sit fully
Measure total thickness and width. Remove a wallet, grip, battery or rugged case rather than forcing the device into shallow hooks.
Cable does not fit
Try a slimmer compatible connector and route it without tension. The access opening does not guarantee every plug shape or port location.
Hinge feels too firm
Unload the stand and move the joint slowly with two hands. Do not apply oil, heat or extra tools; stop if the housing separates or metal bends.
Mounting surface looks marked
Remove the device immediately. Do not keep tightening or loading the mount; follow the furniture, wall or vehicle manufacturer’s care guidance.
Product-specific FAQ
What is UGREEN 10422 designed to do?
It holds a compatible smartphone on a suitable horizontal vehicle air-vent blade for navigation and hands-free screen positioning. It is a passive mechanical holder, not a powered accessory.
Which phones or tablets fit?
phones approximately 4.7–7.2 inches, about 60–89mm wide and under 11mm total phone-and-case thickness; measure the complete setup before ordering. Measure the complete device with its normal case and accessories before ordering.
Can I use a protective case?
Often yes when the combined device and case remain within every stated size, thickness, weight and cradle limit. Thick rugged, wallet, battery, keyboard and grip cases may need removal.
Does it charge the device?
No. The holder contains no charging electronics, battery or power supply. Any charging opening only provides space for a separate compatible cable, charger and socket.
Does it use MagSafe or magnets?
No magnetic attachment is claimed for this SKU. The device is supported mechanically by its cradle, clamp, base, adhesive shelf or vent-mounted structure as described above.
Can I use it in portrait and landscape?
Yes, within the stated fit limits. Reposition or rotate the device only after supporting it with one hand and checking the mount.
Will it stay completely still when I touch the screen?
No freestanding, articulated, adhesive, clamp or vent holder can guarantee zero movement. Use a lower, centred position and support the device during firm typing, drawing or repeated tapping.
What surface or mounting point should I use?
silicone-lined clip for a firm, undamaged, straight horizontal vent blade up to approximately 4.5mm thick; exact media rejects vertical and round/turbine vents. Avoid fragile, dirty, wet, textured, loose or heat-damaged surfaces.
What should I avoid?
not for vertical, round, turbine, curved, retractable, loose or fragile vents; no charging electronics, magnet, suction cup or dashboard adhesive is included. Do not exceed stated dimensions or place the loaded holder where a fall could injure someone or damage another object.
How should I clean it?
Remove the device first. Wipe hard surfaces with a soft, slightly damp cloth, then dry completely. Do not soak hinges, springs, adhesive, clamp pads or vent clips and do not use solvents or abrasives.
What is included?
1 × UGREEN LP120 / 10422 air-vent car phone holder.
Exact-model check before ordering
Match UGREEN SKU 10422, the lp120 air-vent holder, its fit boundary, mounting method and adjustment mechanism. Similar UGREEN holders can use different hinges, clamp spans, device limits, adhesives or vehicle fittings.
GST Invoice available, just mail back with details to order confirmation mail.
Buy direct from official UGREEN India
GST Invoice, Warranty, authenticity, faster support
आपका कार्ट
Ugreen
UGREEN LP120 Spring Air-Vent Phone Holder (10422)
विक्रय कीमतRs. 936.00
नियमित रूप से मूल्यRs. 1,350.00
यूनिट मूल्य
4.7–7.2IN • HORIZONTAL VENTS • 360° JOINT
UGREEN LP120 Spring Air-Vent Phone Holder (10422)
Overview
UGREEN 10422 holds a compatible smartphone on a suitable horizontal vehicle air-vent blade for navigation and hands-free screen positioning. 360° ball joint supports portrait or landscape screen positioning, while spring-loaded side arms open and close around the phone. The verified construction is engineered plastic body, metal-reinforced spring mechanism, aluminium-alloy arm elements and silicone phone/vent contact pads. This guide explains exact fit, setup, stability and safety boundaries so the product is easy to choose and use responsibly.
SKU 10422 visual: Product view: UGREEN LP120 10422 uses spring-loaded side arms and a silicone-lined clip for a suitable vehicle vent.
Key features
Exact holder type
LP120 Air-Vent Holder. holds a compatible smartphone on a suitable horizontal vehicle air-vent blade for navigation and hands-free screen positioning.
Fit boundary
phones approximately 4.7–7.2 inches, about 60–89mm wide and under 11mm total phone-and-case thickness; measure the complete setup before ordering.
Adjustment
360° ball joint supports portrait or landscape screen positioning, while spring-loaded side arms open and close around the phone.
Mounting method
silicone-lined clip for a firm, undamaged, straight horizontal vent blade up to approximately 4.5mm thick; exact media rejects vertical and round/turbine vents.
SKU 10422 visual: Spring grip: both side arms must engage the phone evenly before the vehicle moves.
Measure before ordering
Phone and tablet names are only examples. Physical compatibility is controlled by screen and body size, total thickness, weight, case shape, camera bump, accessories and the way the device meets the support points.
Measure the complete setup
phones approximately 4.7–7.2 inches, about 60–89mm wide and under 11mm total phone-and-case thickness; measure the complete setup before ordering. Screen size alone does not describe case thickness, camera bump, grip accessories or total weight.
Check the support points
Both lower hooks and the padded back surface must contact the device securely. Remove a wallet, ring, battery case or pop-out grip if it interferes.
Choose a stable position
Choose a firm horizontal blade, fit the clip fully and angle the screen while parked. Confirm the mount does not obstruct the road, mirrors, instruments, controls or too much airflow.
Test before normal use
Gently tap the screen and check every hinge, clamp, base, adhesive bond or vent clip. Stop if the device creeps, tips, releases or makes the mounting surface flex.
Adjustment and viewing guide
Verified mechanism: 360° ball joint supports portrait or landscape screen positioning, while spring-loaded side arms open and close around the phone.
Adjust unloaded whenever practical. Support the device with one hand, move the mechanism with the other and stop at its natural limit. A firm hinge is normal; forcing it can damage the joint or make the base slip.
Stability principle: raising, extending or moving a device forward increases leverage. Heavier devices should stay lower, closer to the base or clamp, and slightly tilted back.
SKU 10422 visual: Screen orientation: the 360° ball joint supports portrait or landscape positioning after the vent clip is fully seated.
Use scenarios
Navigation
Position the screen for glanceable navigation without blocking the road, instruments, mirrors or controls.
Hands-free calls
Use the vehicle audio system or a headset as permitted; the holder itself has no microphone or electronics.
Passenger use
A passenger can rotate the screen when the mount and vent remain stable.
Wired charging
The open lower edge may accept a compatible cable; secure it so it cannot catch on controls.
SKU 10422 visual: Navigation setup: place the holder where it does not obstruct controls, road visibility or the entire airflow path.
Setup and usability guidance
Step 1: Park the vehicle safely and inspect the vent shape, blade direction, thickness and condition.
Step 2: Push the padded clip fully onto one suitable horizontal blade without twisting or forcing it.
Step 3: Open the spring arms, centre the compatible phone and release them evenly.
Step 4: Set portrait or landscape angle through the ball joint while the vehicle remains parked.
Step 5: Gently test the phone grip and vent clip before driving.
Step 6: Recheck after temperature changes or rough roads and remove the mount if the vent loosens or bends.
Best practice: Choose a firm horizontal blade, fit the clip fully and angle the screen while parked. Confirm the mount does not obstruct the road, mirrors, instruments, controls or too much airflow.
SKU 10422 visual: One-hand insertion is shown, but installation, removal and adjustment should be completed only while the vehicle is parked.
Mounting surface, stability and environment
Exact mounting method: silicone-lined clip for a firm, undamaged, straight horizontal vent blade up to approximately 4.5mm thick; exact media rejects vertical and round/turbine vents.
Flat and clean contact
Dust, oil, grit and moisture reduce friction and can scratch surfaces. Clean and dry every contact area before installation.
Keep away from edges
Position the loaded device where a slip or release will not send it onto a person, floor, sink, cooker, keyboard or glass object.
Touch gently
Use lighter taps or support the device for typing, drawing and gaming. A holder designed for viewing is not always a rigid typing platform.
Recheck regularly
Temperature, vibration, repeated adjustment and normal wear can change grip. Inspect the mount, pads and device position before each important use.
SKU 10422 visual: Vent boundary: the exact artwork supports straight horizontal blades up to about 4.5mm and rejects round or vertical layouts.
Compatible devices and systems
Verified physical class: phones approximately 4.7–7.2 inches, about 60–89mm wide and under 11mm total phone-and-case thickness; measure the complete setup before ordering.
Apple devices
Compatible iPhone or iPad examples may fit only when their complete size, weight and case remain within the stated physical limits.
Android devices
Samsung Galaxy, Google Pixel, OnePlus, Xiaomi, Redmi, realme and other phones/tablets are assessed by measurements—not brand alone.
E-readers and handhelds
A Kindle, e-reader, Switch or similar device may fit only if all support points engage and the complete device stays inside every size and load limit.
Case caveat
A protective case can increase thickness, move the centre of gravity and cover the charging opening. Measure it installed, not separately.
SKU 10422 visual: Phone fit: the exact artwork lists approximately 4.7–7.2-inch devices with a supported width of about 60–89mm.
What this product does
Holds a compatible smartphone on a suitable horizontal vehicle air-vent blade for navigation and hands-free screen positioning.
Uses the documented lp120 air-vent holder mechanism for hands-free physical support.
Provides the verified adjustment: 360° ball joint supports portrait or landscape screen positioning, while spring-loaded side arms open and close around the phone.
Uses the verified mounting method: silicone-lined clip for a firm, undamaged, straight horizontal vent blade up to approximately 4.5mm thick; exact media rejects vertical and round/turbine vents.
Protects covered contact areas with the specified silicone, rubber or soft pads; these reduce—not eliminate—the possibility of marks.
What this product does not do
not for vertical, round, turbine, curved, retractable, loose or fragile vents; no charging electronics, magnet, suction cup or dashboard adhesive is included.
It does not include MagSafe, wireless charging, a battery, powered USB port or motor unless explicitly stated—which this SKU does not.
It does not make every phone case, tablet, furniture edge, wall finish, air vent or vehicle compatible.
It does not guarantee zero wobble during touch, typing, drawing, rough roads or fully extended use.
It is not safety equipment and should not suspend a device where release could cause injury or serious damage.
What to do
Measure first
Check the complete device and case against every stated size, thickness, opening and load limit.
Adjust with two hands
Support the device or unload the holder before moving a firm hinge, rail, spring arm, clamp or rotating base.
Route cables safely
Leave slack at the connector, avoid sharp bends and keep cables away from hinges, springs, vehicle controls and walking paths.
Inspect the setup
Check screws, pads, clips, clamps, adhesive edges and device seating before use and after relocation or temperature change.
What not to do
Do not exceed limits
Do not guess load capacity, case fit, clamp thickness, vent compatibility or adhesive reuse beyond the exact values stated here.
Do not force movement
Stop when a hinge, clamp or rail reaches its natural limit. Do not use tools for extra leverage unless the supplied assembly step requires them.
Do not use near hazards
Avoid flames, hot cookware, wet areas, unstable shelves, traffic controls and positions directly above people or breakables.
Do not trust a partial grip
Both device and mount must be fully seated. A phone caught by one hook, a clamp on a rounded edge or a clip halfway onto a vent is unsafe.
Warnings and limitations
Vehicle safety: install, insert, remove and adjust only while parked. Extreme cabin heat/cold and weak vent blades can reduce retention. The driver remains responsible for legal, unobstructed placement.
Pinch points: keep fingers, hair, cables and loose clothing clear of hinges, springs, telescopic rails and clamp mechanisms.
Heat and moisture: keep the holder and device away from flames, hot cookware, direct heaters, steam, sinks, rain and pooled liquid.
Children and pets: this is not a toy. Keep small hardware and loaded devices out of reach and avoid trailing cables.
Inspection: stop using the product if a hinge loosens, pad detaches, plastic cracks, metal bends, adhesive lifts, clamp slips or vent blade deforms.
Technical specifications
Brand / SKU
UGREEN 10422
Model / type
LP120 Air-Vent Holder
Colour
Black / silver
Primary use
holds a compatible smartphone on a suitable horizontal vehicle air-vent blade for navigation and hands-free screen positioning
Device fit
phones approximately 4.7–7.2 inches, about 60–89mm wide and under 11mm total phone-and-case thickness; measure the complete setup before ordering
Adjustment
360° ball joint supports portrait or landscape screen positioning, while spring-loaded side arms open and close around the phone
Mounting method
silicone-lined clip for a firm, undamaged, straight horizontal vent blade up to approximately 4.5mm thick; exact media rejects vertical and round/turbine vents
Materials
engineered plastic body, metal-reinforced spring mechanism, aluminium-alloy arm elements and silicone phone/vent contact pads
Supported screen range
Approximately 4.7–7.2in
Compatible phone width
Approximately 60–89mm
Maximum phone + case thickness
Less than 11mm
Vent requirement
Straight horizontal blade
Maximum blade thickness
Approximately 4.5mm
Adjustment
360° ball joint
Charging / electronics
None; passive mechanical holder
Package contents
1 × UGREEN LP120 / 10422 air-vent car phone holder
SKU 10422 visual: Mechanical construction: the passive holder uses a spring cradle and contains no magnet, charging electronics or battery.
Package contents
Exact-SKU reconciliation: Exact live media confirms the 4.7–7.2-inch phone range, 4.5mm vent-blade ceiling, horizontal-only fit and 360° joint. The copy rejects vertical, round and turbine vents instead of describing the mount as universally vehicle-compatible.
Primary sources: exact live UGREEN India product record and images for SKU 10422 plus official regional UGREEN exact-SKU material.
Image policy: only the exact live product images listed in this draft are used. Generic family claims that conflict with dimensions, mechanism or fit are excluded.
Troubleshooting
Device tips forward
Lower the height or arm, tilt the device back, centre it over the support and remove a heavy case/accessory. Stop if the stated fit or load limit is exceeded.
Holder slides or rotates
Unload it, clean and dry contact pads, retighten only as instructed and move to a firmer, flatter mounting point.
Case will not sit fully
Measure total thickness and width. Remove a wallet, grip, battery or rugged case rather than forcing the device into shallow hooks.
Cable does not fit
Try a slimmer compatible connector and route it without tension. The access opening does not guarantee every plug shape or port location.
Hinge feels too firm
Unload the stand and move the joint slowly with two hands. Do not apply oil, heat or extra tools; stop if the housing separates or metal bends.
Mounting surface looks marked
Remove the device immediately. Do not keep tightening or loading the mount; follow the furniture, wall or vehicle manufacturer’s care guidance.
Product-specific FAQ
What is UGREEN 10422 designed to do?
It holds a compatible smartphone on a suitable horizontal vehicle air-vent blade for navigation and hands-free screen positioning. It is a passive mechanical holder, not a powered accessory.
Which phones or tablets fit?
phones approximately 4.7–7.2 inches, about 60–89mm wide and under 11mm total phone-and-case thickness; measure the complete setup before ordering. Measure the complete device with its normal case and accessories before ordering.
Can I use a protective case?
Often yes when the combined device and case remain within every stated size, thickness, weight and cradle limit. Thick rugged, wallet, battery, keyboard and grip cases may need removal.
Does it charge the device?
No. The holder contains no charging electronics, battery or power supply. Any charging opening only provides space for a separate compatible cable, charger and socket.
Does it use MagSafe or magnets?
No magnetic attachment is claimed for this SKU. The device is supported mechanically by its cradle, clamp, base, adhesive shelf or vent-mounted structure as described above.
Can I use it in portrait and landscape?
Yes, within the stated fit limits. Reposition or rotate the device only after supporting it with one hand and checking the mount.
Will it stay completely still when I touch the screen?
No freestanding, articulated, adhesive, clamp or vent holder can guarantee zero movement. Use a lower, centred position and support the device during firm typing, drawing or repeated tapping.
What surface or mounting point should I use?
silicone-lined clip for a firm, undamaged, straight horizontal vent blade up to approximately 4.5mm thick; exact media rejects vertical and round/turbine vents. Avoid fragile, dirty, wet, textured, loose or heat-damaged surfaces.
What should I avoid?
not for vertical, round, turbine, curved, retractable, loose or fragile vents; no charging electronics, magnet, suction cup or dashboard adhesive is included. Do not exceed stated dimensions or place the loaded holder where a fall could injure someone or damage another object.
How should I clean it?
Remove the device first. Wipe hard surfaces with a soft, slightly damp cloth, then dry completely. Do not soak hinges, springs, adhesive, clamp pads or vent clips and do not use solvents or abrasives.
What is included?
1 × UGREEN LP120 / 10422 air-vent car phone holder.
Exact-model check before ordering
Match UGREEN SKU 10422, the lp120 air-vent holder, its fit boundary, mounting method and adjustment mechanism. Similar UGREEN holders can use different hinges, clamp spans, device limits, adhesives or vehicle fittings.
