UGREEN LP845 MagSafe-Compatible Magnetic Car Phone Mount – Air Vent...
UGREEN LP845 • SKU 65764
Secure Magnetic Phone Placement Without Bulky Clamps
The UGREEN LP845 MagSafe-Compatible Magnetic Car Phone Mount provides quick one-handed phone attachment, a secure metal air-vent hook and flexible 360° positioning for convenient navigation and hands-free viewing.
Its circular magnetic array is directly compatible with MagSafe-enabled iPhones and MagSafe-compatible cases. Two adhesive magnetic rings are included for compatible Android phones, non-MagSafe iPhones and suitable non-magnetic cases.
Designed for Quick, Convenient Phone Access
Strong Magnetic Array
Twenty N52 magnets create a circular magnetic connection around compatible phones and cases.
Secure Vent Hook
The metal hook catches behind a compatible air-vent blade instead of relying only on surface friction.
One-Hand Attachment
Place a compatible phone against the magnetic face to attach it without opening side clamps.
Flexible Orientation
Adjust the ball joint for portrait, landscape or an intermediate viewing position.
Circular Array of 20 N52 Magnets
Twenty N52 magnets are arranged around the mounting face to align with a MagSafe-compatible magnetic ring. The circular arrangement distributes the magnetic connection around the phone rather than concentrating it at a single point.
For the strongest connection, keep the mounting face and phone or case clean, align the magnetic rings centrally and avoid placing cards, wallets, loose metal plates or thick material between the phone and holder.
Up to 2,500 g Stated Magnetic Holding Force
The product is rated with a stated magnetic holding force of approximately 2,500 g or 5.5 lb, with the product artwork indicating approximately 18–23 N.
Actual holding performance depends on phone weight, case thickness, magnetic-ring alignment, road conditions, vent strength and correct hook installation.
Snap On and Lift Off
Once the vent mount is correctly installed, a compatible phone can be placed against the magnetic face without opening or closing mechanical arms.
This makes it convenient to position the phone before beginning a journey and remove it after parking. Always install, remove or adjust the phone while the vehicle is safely stationary.
360° Ball-Joint Adjustment
The adjustable ball joint allows you to rotate the phone between portrait and landscape orientation and fine-tune its viewing direction.
Portrait orientation is useful for calls and standard navigation layouts, while landscape orientation can provide a wider map or media display. Position the screen where it does not obstruct your view of the road, mirrors, controls or instruments.
MagSafe-Compatible and Adaptable for Other Phones
Direct magnetic compatibility
- iPhone 17 series
- iPhone 16 series
- iPhone 15 series
- iPhone 14 series
- iPhone 13 series
- iPhone 12 series
- Compatible MagSafe cases with an integrated magnetic ring
Compatibility using an included metal ring
- Compatible Samsung Galaxy phones
- Compatible Google Pixel phones
- OnePlus, Xiaomi, Redmi, Motorola, OPPO, vivo, realme and other smartphones
- Non-MagSafe iPhones and suitable non-magnetic cases
A standard case without an integrated magnetic ring can substantially weaken the connection. Use a supplied ring on a suitable flat surface when direct magnetic compatibility is unavailable.
Compact Construction with a Metal Vent Hook
A reinforced hook mechanism fastens behind a compatible vent blade. Tightening the adjustment collar draws the hook towards the mount to create a stable connection around the vent.
Protective contact surfaces help reduce direct scratching, but the mount must not be overtightened. Inspect delicate, loose, thin or damaged vent blades before installation.
Check Your Vehicle’s Air Vent Before Ordering
The extended hook is designed for many conventional straight horizontal and vertical air-vent blades. Reference compatibility is for blades up to approximately 26 mm deep and 4 mm thick.
Generally suitable for:
- Straight horizontal vent blades
- Straight vertical vent blades
- Vent blades with sufficient rear space for the metal hook
Not recommended for:
- Round or turbine-style radial vents
- Vents with only two blades
- Recessed, curved or unusually thick vent blades
- Fragile, loose, cracked or damaged vents
- Vents without enough rear clearance for the hook
Product Specifications
| Brand | UGREEN |
|---|---|
| Model | LP845 |
| SKU / MPN | 65764 |
| GTIN / barcode | 6941876267644 |
| Product type | MagSafe-compatible magnetic air-vent car phone holder |
| Colour | Grey |
| Magnetic array | 20 × N52 magnets |
| Stated magnetic force | Approximately 18–23 N / up to 2,500 g stated holding force |
| Adjustment | 360° adjustable ball joint |
| Viewing orientation | Portrait, landscape or intermediate angle |
| Vehicle mounting method | Adjustable metal air-vent hook |
| Listed dimensions | Approximately 11 × 8.5 × 3.8 cm |
| Listed product weight | Approximately 110 g |
| Charging function | None – this product is a magnetic holder, not a charger |
| Power, cable or pairing required | No |
How to Install the Vent Mount
- Park the vehicle safely and switch off the engine before installation.
- Inspect the selected vent blade and confirm that it is straight, secure and undamaged.
- Loosen the adjustment collar to extend the metal hook.
- Guide the hook around the rear edge of the vent blade.
- Tighten the collar gradually until the mount feels secure. Do not overtighten.
- Adjust the ball joint to the required viewing angle.
- Attach the phone and perform a gentle stability check before driving.
- Recheck the mount periodically, especially after driving on rough roads.
Using the Included Magnetic Rings
- A MagSafe-compatible iPhone or MagSafe case normally does not require an additional ring.
- For another compatible phone or case, choose a clean, dry and flat application surface.
- Centre the ring around the phone’s wireless-charging coil position where applicable.
- Remove the adhesive backing, position the ring carefully and press it evenly onto the surface.
- Allow the adhesive to settle according to the supplied instructions before placing the phone on the holder.
Adhesive rings may not bond reliably to textured, oily, fabric, silicone or heavily curved surfaces. Ring positioning can also affect wireless-charging alignment. Attach the ring to a suitable case instead of directly to the phone if surface marks are a concern.
Important Usage Information
- This mount does not charge the phone.
- Install and adjust the mount only while the vehicle is safely stationary.
- Do not position the phone where it obstructs the road, mirrors, instruments, controls or airbags.
- Do not use the mount on damaged, loose or incompatible vent blades.
- Do not overtighten the hook around a delicate vent blade.
- Cases containing cards, wallets or thick accessories can weaken magnetic attachment.
- Magnetic strength does not replace correct vent installation and phone alignment.
- Follow applicable road-safety rules and avoid operating the phone while driving.
What’s in the Box?
- 1 × UGREEN LP845 Magnetic Air-Vent Car Phone Mount
- 2 × Adhesive Magnetic Rings
- 1 × User documentation
Phone, case, vehicle and other accessories shown in the images are for demonstration only.
Frequently Asked Questions
Does this mount wirelessly charge my iPhone?
No. It is a magnetic phone holder only and contains no wireless-charging coil, USB port, cable or power electronics.
Which iPhones attach directly?
MagSafe-enabled iPhone 12 and later models can attach directly when used without a case or with a properly designed MagSafe-compatible case.
Can it hold an Android phone?
Yes, when one of the supplied magnetic rings is correctly attached to a compatible flat phone case or surface.
Will it work through a normal phone case?
A standard case without a magnetic ring can weaken the connection. Use a MagSafe-compatible case or install one of the supplied rings on a suitable case.
Can I rotate the phone horizontally?
Yes. The 360° ball joint lets you position the phone in portrait, landscape or an intermediate viewing angle.
Does it fit every vehicle air vent?
No car vent mount fits every vent. This model is intended for many straight horizontal and vertical blades but is not recommended for round radial vents, two-blade vents or vent designs without sufficient hook clearance.
Will the mount block airflow?
The mount and phone occupy part of the selected vent, so airflow may be partially redirected or reduced depending on the vent and phone size.
Can I continue using wireless charging with the supplied ring?
The ring has an open centre, but wireless-charging performance depends on accurate ring placement, the phone, case thickness and charger design. Remove the phone from the car mount before charging.
Can the adhesive ring be removed later?
It can normally be removed carefully, but adhesive residue or surface marks are possible. Applying it to a replaceable case is preferable when protecting the phone’s finish is important.
Genuine UGREEN Product for India
Genuine UGREEN product • GST invoice available • India-based customer support • Warranty support under the applicable UGREEN India policy
-
Dimentions
-
Warranty
-
Weight
GST Invoice available, just mail back with details to order confirmation mail.
Buy direct from official UGREEN India
GST Invoice, Warranty, authenticity, faster support
