Exact SKU 45436 • researched buying guide
UGREEN HD175 45436 10m HDMI 2.1 Cable, 8K60/4K120
A 10m non-directional passive HDMI 2.1 cable for long copper routes between full-size HDMI equipment. The exact current listing verifies 48Gbps, 8K60 and 4K120, while the installation guidance below highlights the extra care needed at this length.
Fast purchase decision
Overview
Best suited to
AV rack to a television or projector across a room; Console or PC to a distant compatible display.
Choose it for
10m reach, full-size hdmi type-a male to full-size hdmi type-a male and 8K60 / 4K120.
Do not assume
This is a 10m passive run, so confirm the exact ports, signal format and intermediate equipment rather than assuming every 48Gbps mode will work in every setup.
Verified exact-model highlights
Key features
Exact length
10m, selected for the stated route—not a generic family length.
Connector fit
Full-size HDMI Type-A male to full-size HDMI Type-A male
Verified video target
Up to 8K at 60Hz or 4K at 120Hz
Signal capacity
Up to 48Gbps
Direction
Non-directional; either plug may face the source
Feature scope
HDR signalling, eARC, Dolby-compatible audio pass-through, 3D.
Exact-SKU guidance
How to read the video rating
Maximum capability is not a guarantee for every setup
This is a 10m passive run, so confirm the exact ports, signal format and intermediate equipment rather than assuming every 48Gbps mode will work in every setup.
- Verified exact-SKU target: Up to 8K at 60Hz or 4K at 120Hz.
- Published capacity: Up to 48Gbps.
- The source, display and selected ports must all support the requested mode.
- Receivers, switches, splitters, capture devices, docks, adapters, wall plates and extra cables may lower the result.
What the cable can carry
Audio and feature support
HDR signalling
The cable can transport the listed signal only when the source, content and receiving equipment support it.
eARC
This is a pass-through capability; it must be available and enabled across the complete HDMI chain.
Dolby-compatible audio pass-through
This is a pass-through capability; it must be available and enabled across the complete HDMI chain.
3D
This is a pass-through capability; it must be available and enabled across the complete HDMI chain.
backward operation with earlier HDMI equipment
This is a pass-through capability; it must be available and enabled across the complete HDMI chain.
A cable does not decode Dolby or DTS audio, create HDR, generate extra frames or add ARC/eARC to an ordinary HDMI port. Those functions come from compatible devices, content and settings.
Exact-SKU guidance
Construction and routing
Passive cable build
HD175 long-run passive copper cable with a flexible black PVC body, pure-copper core information on the official page and reinforced full-size HDMI connectors.
- Non-directional; either plug may face the source
- Plan gentle bends and protect the connector housings from pulling force.
- Do not infer an in-wall, plenum, LSZH or fire rating unless it is printed on the supplied cable.
- Test the exact intended mode before any route becomes difficult to access.
Practical examples
Use scenarios
Home entertainment
AV rack to a television or projector across a room
Work and presentation
Console or PC to a distant compatible display
Gaming and media
Presentation computer to a meeting-room screen
Audio or convenient routing
TV eARC connection to a remotely placed receiver or soundbar
Connect • configure • verify
Setup and usability guidance
- Step 1: Measure the routed path and avoid unnecessary excess cable.
- Step 2: Connect either end to source or display because the cable is non-directional.
- Step 3: Start with a direct source-to-display test at the intended mode.
- Step 4: Enable the correct enhanced HDMI input and verify the display reports the expected resolution, refresh rate and HDR.
- Step 5: Add receivers, switches or wall plates only after the direct link is stable.
After setup, open the television or monitor signal-information page. It is the quickest way to confirm the actual resolution, refresh rate and HDR state received by the display.
Exact-SKU guidance
Compatible devices and systems
Match the connector and the port capability
- Consoles, PCs, media players and AV receivers with full-size HDMI output
- TVs, projectors and monitors with full-size HDMI input
- Compatible eARC television and audio equipment
- Earlier HDMI equipment at its highest mutually supported mode
Operating systems normally need no cable driver. A computer may still require the correct graphics driver and display settings, while a USB-C-only device needs a separate video-capable adapter or dock.
Avoid the common mismatch
Check before buying
- The required physical route really suits 10m, with enough slack but no tight coil or tension.
- Both connector ends match the intended ports: Full-size HDMI Type-A male to full-size HDMI Type-A male.
- The requested mode stays within the exact-SKU guidance: Up to 8K at 60Hz or 4K at 120Hz.
- This is a 10m passive run, so confirm the exact ports, signal format and intermediate equipment rather than assuming every 48Gbps mode will work in every setup.
- Every adapter, receiver, switch, splitter, wall plate or extra cable in the path supports the same video, HDCP and audio requirements.
- A concealed route does not require a safety rating that has not been verified for this cable.
Scope and limitations
What this product does
- Provides a 10m physical HDMI connection using full-size hdmi type-a male to full-size hdmi type-a male.
- Carries compatible digital video and audio within the verified 8K60 / 4K120 guidance.
- Passes supported functions such as HDR signalling, eARC, Dolby-compatible audio pass-through, 3D when the complete system supports them.
- Works as a passive cable without a separate power supply.
What this product does not do
- It does not upscale content, create HDR, decode audio, generate frames or improve the native quality of a display.
- It does not add a resolution, refresh rate, ARC/eARC feature or HDCP version to a port that lacks it.
- It does not convert USB-C, DisplayPort, Mini/Micro HDMI, DVI or VGA.
- It is not an active repeater, fibre extender or ordinary Ethernet/LAN cable.
Care and installation practice
What to do
- Check the exact SKU and length on the order and received package before installation.
- Hold the connector housing—not the cable body—when plugging or unplugging.
- Test the intended video and audio mode with a direct connection before adding other devices.
- Leave a relaxed curve and support the cable so the HDMI socket carries no weight.
What not to do
- Do not force a misaligned HDMI plug or pull a connector out by the cable.
- Do not sharply kink, knot, crush, staple, pinch under furniture or expose the cable to heat or moisture.
- Do not assume the cable upgrades the HDMI capability of a source, display, adapter or receiver.
- Do not conceal the cable in a wall or ceiling without verifying its printed rating and local installation rules.
Read before use
Warnings and limitations
Verified ceiling
The official page describes this 10m model as passive and non-directional; it is not a fibre AOC.
Installation caution
Long passive routes are sensitive to the complete signal format and every connection in the chain.
Not a converter
No certification, in-wall, plenum or fire rating is claimed.
Route and rating
Do not coil tightly, crush, staple or leave either HDMI port carrying the cable weight.
Exact-model reference
Technical specifications
| Brand | UGREEN |
|---|---|
| SKU | 45436 |
| Product type | Passive HDMI cable |
| Cable length | 10 metres |
| Connectors | Full-size HDMI Type-A male to full-size HDMI Type-A male |
| Direction | Non-directional; either plug may face the source |
| Verified video guidance | Up to 8K at 60Hz or 4K at 120Hz |
| Published bandwidth / rate | Up to 48Gbps |
| Construction | HD175 long-run passive copper cable with a flexible black PVC body, pure-copper core information on the official page and reinforced full-size HDMI connectors. |
| Feature support | HDR signalling, eARC, Dolby-compatible audio pass-through, 3D, backward operation with earlier HDMI equipment |
| HDMI capability stated for exact SKU | 48Gbps; up to 8K60 or 4K120 |
| Cable architecture | Long-run passive copper |
| Series / model | HD175 |
| Outer construction | Flexible black PVC |
| Direction | Non-directional |
In the box
Package contents
- 1 × UGREEN 45436 10m HDMI male-to-male cable
Devices, adapters, cable-management accessories and any other cables shown in use images are not included. Confirm SKU 45436 and 10m on the received item.
Selected and visually checked
Exact-product media
Only selected images from this exact live Shopify product gallery are shown. Family artwork that conflicted with the verified length or capability was deliberately excluded.
Tap a question to expand
Product-specific FAQ
What is the verified video target for SKU 45436?
Up to 8K at 60Hz or 4K at 120Hz. This is a 10m passive run, so confirm the exact ports, signal format and intermediate equipment rather than assuming every 48Gbps mode will work in every setup.
What connectors does it use?
Full-size HDMI Type-A male to full-size HDMI Type-A male. It does not fit Mini HDMI, Micro HDMI, USB-C, DisplayPort, DVI or VGA without a separate compatible adapter.
Does the cable create a higher resolution or refresh rate?
No. It carries a compatible HDMI signal; it cannot add a mode, upscale content or improve a display panel.
Which devices can I connect?
Use it with compatible full-size HDMI equipment such as Consoles, PCs, media players and AV receivers with full-size HDMI output; TVs, projectors and monitors with full-size HDMI input; Compatible eARC television and audio equipment.
What determines the actual picture mode?
The lowest-capability source, port, display, content format, setting and intermediate device controls the final mode.
Can I use it with a console?
Yes, when the console, game and display support the selected mode. The cable cannot make a console output an unsupported refresh rate.
Can I route it inside a wall or ceiling?
No concealed-installation rating is claimed here. Check the physical cable marking and local requirements before any in-wall or ceiling route.
What should I check if there is no picture?
Reseat both ends, select the correct input, try a direct connection, lower the mode and verify every device and setting in the chain.
How should I care for the cable?
Use gentle curves, avoid crushing or pulling, grip connector housings, and keep the cable dry and away from heat.
What is included?
One UGREEN 45436 10m HDMI male-to-male cable. Connected equipment and adapters are not included.
